Before painting, it is necessary to prepare all necessary items for painting. The necessary items for painting include paint and thinner, paint agitator, weighing equipment, mortar spraying machine, and supporting equipment, paint, and coating inspection Instruments, etc. In addition, the cement sprayer machine paint deployment and machine debugging work are also required.

Coating deployment

1. Confirm the coating

Confirm the type and quality of the coating according to the coating requirements, and correct the problem in time.

2. Adjust paint viscosity

Stir the paint thoroughly and measure the viscosity of the paint. If the viscosity is too high, add a thinner to adjust the viscosity to a proper viscosity.

• 

• 

Installation and inspection of concrete mortar spraying machine

1. Installation

Install and connect the parts and auxiliary accessories of the prepared concrete mortar spraying machine correctly.

2. Check

After the cement mortar spraying machine is installed and connected, it is ready to be sprayed. Before spraying, check whether the power source is operating normally, and then suck in the paint, check whether the high-pressure paint cylinder is pressurized properly, whether the conveying hose is leaking, and whether the connection between the accessories is tight. Whether the spray gun and filter are clogged, etc. Find faults and eliminate them in time.

3. Control of painting environmental conditions

Measure the temperature and humidity of the spraying environment, and meet the coating conditions, and the coating operation can be carried out. The outdoor painting should also consider weather factors. During a period of time from spraying to drying of the coating surface, rain and weather with high wind speed and heavy sand should be avoided.

• 

• 

Matters needing attention in cement sprayer machine work

The cement sprayer machine is mainly a problem of the operation and use of the spray gun. Improper use of the spray gun will cause coating defects. The coating defects are mainly manifested in three aspects: First, the coating is uneven, which is mainly manifested as stubble marks, The color of the coating is inconsistent, and the smoothness of the coating is poor. Second, the coating is too thick, which is mainly manifested by the phenomenon of sagging, the surface of the coating is dry and the deep layer does not dry, and the phenomenon of coating skinning occurs. Third, the coating is too thin; the main manifestation is that the coating cannot reach the required thickness after the conventional spraying passes.

• 

• 

The operation and use of the spray gun mainly pay attention to three problems

1. Gun distance

The distance between the nozzle of the cement mortar spraying machine and the surface to be coated is called the gun pitch, and the gun pitch is preferably 300~400mm. If the gun distance is too small, the spraying pressure is too large, and the recoil force is also large, and the coating is prone to unevenness, and the spray width (fan width) is small so that the coated object is locally sprayed with too much material and the coating film is too thick. If the gun distance is too large, the spraying pressure loss is large, the paint is easy to be lost, and the spray range is too large, so that the partial spray material of the coated object is too small, and the coating film cannot meet the thickness requirements.

2. The angle of spraying fan

The spraying fan and the surface of the object to be coated should be perpendicular to each other. When manually operating the spray gun, pay attention to the width of each spraying should not be too large, otherwise, the inconvenience of the operation will cause the angle of the spraying fan to change significantly, resulting in an uneven coating.

3. Running direction and speed of spray gun

The running direction of the spray gun must always be parallel to the surface of the object to be coated and perpendicular to the spray fan surface to ensure the uniformity of the coating. The running speed of the spray gun should be stable, preferably 300~400mm/s. Unsteady running speed, uneven coating thickness, too fast running speed, too thin coating, too slow coating too thick.

Industrial oxygen generator

The principle of the industrial oxygen generator is to use air separation technology. Firstly, the air is compressed with high density and then the difference in the condensation point of each component in the air is used to separate the gas and liquid at a certain temperature, and then it is obtained by further rectification. Industrial oxygen is generally obtained through this physical method. An industrial oxygen generator is also called air separation equipment. According to the number of products, it can be divided into small-scale equipment below 800m3/h; medium-sized equipment from 1000-6000m3/h; large-scale equipment above 10000m3/h. The so-called 800m3/h and 1000-6000m3/h represent the hourly output of the oxygen plant from the air separation tower.

• 

• 

Household oxygen generator

The working principle of household oxygen making equipment: using molecular sieve physical adsorption and desorption technology. The oxygen making machine is filled with molecular sieves, which can adsorb nitrogen in the air when pressurized, and the remaining unabsorbed oxygen is collected and becomes after purification. High purity oxygen. The molecular sieve discharges the adsorbed nitrogen back into the ambient air during decompression and can adsorb nitrogen and produce oxygen during the next pressurization. The whole process is a periodic dynamic cycle process, and the molecular sieve is not consumed.

• 

• 

medical oxygen generator

All medical oxygen generators use the world’s advanced PSA (pressure swing adsorption) air separation oxygen production technology, which is based on the difference in the adsorption capacity of the attractant (zeolite molecular sieve) to oxygen and nitrogen in the air to achieve the separation of oxygen and nitrogen. When air enters the bed with adsorbent, nitrogen has a strong adsorption capacity and is adsorbed, but oxygen is not adsorbed so that a high concentration of oxygen can be obtained at the outlet end of the adsorption bed. Because the adsorbent has the characteristic that its adsorption capacity changes with pressure, changing its pressure can make adsorption alternately perform adsorption and desorption operations.

Regardless of the purpose of the oxygen making machine, the physical oxygen production method is adopted, and the oxygen is separated by isolating air.

Application of PSA oxygen generator

The PSA oxygen generator has an on-site oxygen generation function, which has great convenience and practicality. Applications include medical oxygen, chemical industry (various oxidation reactions, ozone production, coal gasification, pharmaceutical production), electronics, aquaculture,

1. Electric furnace steelmaking, blast furnace ironmaking. 2. Non-ferrous metal refineries, which may improve productivity, reduce energy consumption, and protect the environment. 3. Oxygen-enriched breeding. 4. Pure oxygen biochemical, garbage incineration. 5. Glass manufacturing, medical oxygen, etc.

• 

• 

The PSA oxygen generator is widely used in all walks of life due to its simple process flow, low investment, and convenient maintenance. It is widely used in metallurgical combustion, chemical industry, environmental protection, building materials, light industry, medical treatment, aquaculture, biotechnology, sewage treatment, and other fields. In response to the different requirements for oxygen use by different users in different industries, YG Machinery provides personalized and professional oxygen generator machines to fully meet the gas requirements of different users.

If the concrete mortar spraying machine is professional spraying equipment specially used for spraying mortar, it can spray the mortar with particles below 5 mm. The cement sprayer machine can not only be used for spraying, but also for pouring mortar. In addition, the cement mortar spraying machine is also called a fast mortar spraying machine because of its high efficiency spraying speed; cement plaster spraying machine is suitable for spraying materials: putty powder, paint, real stone paint, cement Water-soluble materials such as mortar, thermal insulation mortar, fireproof materials, thermal insulation materials, and sound-absorbing materials. Mortar sprayers adjust the flow rate to adjust the best spraying effect. In addition to the switch on the electric control box, mortar sprayers are also equipped with remote control switches for spraying. The link between the concrete mortar spraying machine and the feeding pipe can be rotated, which is convenient for operation, high construction efficiency, and good quality. The multifunctional spraying machine is small in size, easy to carry on site, and has a low cost of accessories and simple maintenance.

• 

• 

The principle of use of cement mortar spraying machine is to replace automatic painting equipment that uses a spray gun to disperse the paint into a mist and spray it on the wall surface. A concrete mortar spraying machine has a wide range of applications. Mortar sprayers and manual roller coating have the following advantages:

1. Save paint. The thickness of the paint is not even enough;

2. Automatic mortar sprayers can easily overcome corners, gaps, and uneven hard-to-paint parts;

3. Mortar sprayers extend the service life of the coating. The automatic paint spraying machine can make the paint particles penetrate into the gap of the wall, so that the paint film also forms a mechanical occlusion on the wall, which enhances the adhesion of the paint and prolongs the service life.

4. The surface quality of the painted wall is excellent. The spray coating has the advantages of smoothness, brilliance, compactness, and no brush marks.

5. Very high painting efficiency. The spraying efficiency is 10 times or more than that of traditional roller construction.

6. Automatic mortar sprayers also save various inputs and costs.

• 

• 

The concrete mortar spraying machine is special coating equipment that uses spraying technology. The principle is to control the airflow to instantly push the air distribution reversing device to reverse, so that the piston of the air motor makes a stable and continuous reciprocating motion. It is suitable for reinforcement, leveling, painting, and pumping. It can be used for plastering of internal and external walls with ordinary mortar, smoothing plaster, thermal insulation mortar, bonding mortar, lime paint, repairing painting, face ash, sticking tiles, and filling mortar. You can use both ready-mixed and pre-mixed mortars at the same time. By changing the spray gun and screw pump, you can adjust the air volume and use most ordinary mortars and special mortars to achieve multiple functions in one machine, and use different materials with different mixers to achieve the integration of mixing and spraying.

With the continuous development of drilling production, the use conditions of drilling rigs have become more and more diversified, and various types of drilling rigs have appeared accordingly. Factors affecting the type and composition of drilling rigs include drilling method, drilling depth, borehole size and drilling tool size, drilling area conditions and so on.

• 

• 

Water Well Drilling Rig

Water well drilling rigs are mechanical equipment for drilling holes on the ground. They are also called well drilling rigs. They are suitable for soil, sand, and glue layers, and are more suitable for complex foundation construction such as gravel layers. Therefore, they are bridges, Ideal equipment for construction of deep foundation projects with large and small calibers such as construction, farmland water conservancy, electric power, telecommunications, and engineering precipitation. YG Machinery also sells various water well drilling machines. For example, small water well drilling rigs, crawler water well drilling rigs, hydraulic water well drilling rigs, etc.

• 

• 

Down the Hole Drilling

Down the Hole Drilling can drill holes in rocks of medium-hard or above (f≥8). Like the rock drill, it has the process of rock drilling and hole formation of impact, rotation, ballast removal, and advancement, and both belong to the impact rotary drilling. Like the external rotary rock drill, it has an independent slewing mechanism and an impact mechanism. The difference is that the impact mechanism of the DTH drilling rig is installed on the front end of the drill pipe, submerged into the bottom of the hole, and continuously advances as the drilling extends. DTH drilling rig is named after the impactor dives into the bottom of the hole.

• 

• 

Core Drilling Rig

core drilling rig is suitable for large and small diameter core drilling mainly based on alloy stone and diamond. It is suitable for metal and non-metal solid mineral deposit exploration, shallow oil and natural gas exploration, geothermal well exploration, mine tunnel ventilation, drainage, and In the construction of large-diameter foundation piles, core drilling machines are widely used in geology, metallurgy, coal, hydrology, water wells, engineering, and other fields.

• 

• 

Rotary Drilling Rig

A rotary drilling rig is a construction machine suitable for hole-forming operations in building foundation engineering. Widely used in municipal construction, highway bridges, high-rise buildings, and other foundation construction projects, with different drilling tools, suitable for dry (short spiral), or wet (revolving bucket) and rock (core drilling) drilling operations, rotary drilling rig has the characteristics of large installed power, large output torque, large axial pressure, flexible maneuverability, high construction efficiency, and multi-function.

• 

• 

Anchor Drilling Machine

The anchor drilling machine, also known as the anchor drilling rig, is a pneumatic impact machine. The anchor drilling machine is mainly used in landslides and dangerous rock mass anchoring projects in the prevention and control of various geological disasters. It is suitable for the construction of urban deep foundation pits and anti-floating anchors. For poles and foundation grouting reinforcement engineering holes, blasting holes for blasting engineering, high-pressure jet grouting piles, tunnel pipe shed support holes, etc., the power head can be slightly changed to facilitate all-round construction. The anchor drilling machine is suitable for a variety of drilling processes. The output speed of the power head is continuously variable. The drilling parameters can be independently selected according to different construction requirements and geological conditions to achieve the best drilling efficiency.

There are many types of gloves on the market, and the production process of gloves of the same material is also different. Because of this, various gloves making machines have also appeared one after another. So how to classify the material of glove manufacturing machines? What are the types of gloves making machines? According to the different materials of the gloves, it can be divided into several types: Nitrile glove machine, latex surgical gloves production line, PVC glove machine, PE glove machine, gloves knitting machine, etc. The appropriate glove production line can be selected according to the investment direction.

• 

• 

Nitrile Glove Machine

Process of the nitrile glove production line: The nitrile glove making machine uses latex or synthetic rubber as the main raw material and other chemicals as auxiliary materials. It is cleaned with acid and alkali and washed with water. The cleaned model is first immersed in hot water and heated until it is soaked in coagulant and dried. Carry out dipping. After dipping, it is sent to an oven for preliminary drying, flushed with hot water, and then sent to the oven for curing and drying to form. After the gloves are demolded, they are inflated or filled with water for inspection, washed, dehydrated, and dried, then packaged and sent to the finished product warehouse.

Latex gloves application scope: Nitrile gloves are widely used in housework, electronics, chemicals, water industry, glass, food and other factories, hospitals, scientific research and other industries.

• 

• 

Latex Surgical Gloves Production Line

The natural latex glove production line and industrial latex glove production line are designed with the advanced technology and process formula of Japanese and Korean fleece glove production lines. The equipment has a reasonable structure and is suitable for a variety of formulas; automatic flocking/electrostatic flocking can produce single-color and double-color fleece It can also produce imitation Oxford gloves. The product has bright color and high one-time pass rate, meeting the requirements of GB and CE. The production line specifications are 70 meters, 90 meters, 110 meters, etc., and can also be designed according to the customer’s production site. , The company adheres to the principle of reputation, quality, and customer satisfaction, sincerely welcome new and old customers to visit and buy, we will serve you wholeheartedly!

• 

• 

Plastic PE Glove Making Machine

Fully automatic plastic film disposable glove production line. During the production process, finished products and waste materials can be separated manually and conveniently-the machine only needs one person to operate. The maximum 150 pieces/minute has the advantages of long continuous working time, high output, and low labor. PE glove making machine can also be equipped with film finger cots and various special plastic products according to customer needs. The whole machine is controlled by the microcomputer touch screen, the three-phase hybrid motor drags the materials, and the automatic counting can set the number of sheets arbitrarily. Various shapes of knife molds can be customized, easy to install and unload.

Plastic glove making machines can be modified to produce plastic gloves, medical finger cots, and other related medical and health products. This product is usually used in large hotels, guesthouses, medical and health care, family life, paint protection, beauty salons, gardening work, cleaning work, etc.

• 

• 

Glove Knitting Machine

The cotton gloves produced by the automatic glove knitting machine are also a kind of labor protection gloves, and the knitted gloves are mainly used to keep warm and cold. This type of glove machine is simple to operate and can be knitted into labor insurance gloves and cold and frost-proof elastic gloves suitable for different people in all walks of life according to requirements. It can also knit fashionable casual magic gloves, half-finger gloves, five-finger socks, etc.

Core Drilling Rig

core drilling rig is suitable for large and small diameter core drilling mainly based on alloy stone and diamond. It is suitable for metal and non-metal solid mineral deposit exploration, shallow oil and natural gas exploration, geothermal well exploration, mine tunnel ventilation, drainage and In the construction of large-diameter foundation piles, concrete core drilling machines are widely used in geology, metallurgy, coal, hydrology, water wells, engineering and other fields.

• 

• 

Water Well Drilling Rigs

A water well drilling machine is a mechanical equipment for drilling water wells and completing operations such as downhole pipes and well washing. Generally, it is divided into three categories: rotary rotary machine, percussion drilling machine and compound rotary machine. Water well drilling rigs can be divided into bulk type, trailer type and vehicle-mounted type, and crawler type according to the assembly form; according to the drilling depth, they are divided into shallow well drilling rigs, medium-deep well drilling rigs, deep well drilling rigs, and ultra-deep well drilling rigs; according to the type of driving equipment It can be divided into mechanical drive drilling rigs, electric drive drilling rigs, and hydraulic drilling rigs.

• 

• 

Down the Hole Drilling

Down the Hole Drilling can drill holes in rocks of medium hard or above (f≥8). Like the rock drill, it has the process of rock drilling and hole formation of impact, rotation, ballast removal and advancement, and both belong to the impact rotary drilling. Like the external rotary rock drill, it has an independent slewing mechanism and an impact mechanism. The difference is that the impact mechanism of the DTH drilling rig is installed at the front end of the drill pipe, submerged into the bottom of the hole, and continuously advances with the extension of the drilling. DTH drilling rig is named after the impactor dives into the bottom of the hole.

• 

• 

Rotary Drilling Rig

Rotary drilling rig is a construction machine suitable for drilling operations in building foundation engineering. Widely used in municipal construction, highway bridges, high-rise buildings and other foundation construction projects, with different drilling tools, suitable for dry (short spiral), or wet (rotary bucket) and rock (core drilling) drilling operations, rotary drilling machine has the characteristics of large installed power, large output torque, large axial pressure, flexibility, high construction efficiency and multi-function.

• 

• 

Anchor Drilling Machine

Anchor drilling machine, also known as bolt drilling rig, is a pneumatic impact machine. The anchor drilling machine is mainly used in landslides and dangerous rock mass anchoring projects in the prevention and control of various geological disasters. It is suitable for the construction of urban deep foundation pits and anti-floating anchors. For pole and foundation grouting reinforcement engineering holes, blasting holes for blasting engineering, high-pressure jet grouting piles, tunnel pipe shed support holes, etc., the power head can be slightly changed to facilitate all-round construction. Anchor drilling rig is suitable for a variety of drilling processes. The output speed of the power head is continuously variable. The drilling parameters can be independently selected according to different construction requirements and geological conditions to achieve the best drilling efficiency.

With the advent of the toilet paper peak season market, the price of base paper may be affected to some extent. In addition to preparing the base paper for toilet paper processing, a tissue making machine is also needed. If many customers do in the early stage, the funds are relatively limited and the market needs to be explored, so many people will choose small ones. So how much is a set of tissue making machine?

• 

• 

The tissue paper making machine includes three machines in total: a rewinder machine, a band saw paper cutting machine, and a water-cooled sealing machine. These equipment can complete the normal production process of roll paper. The most important of the three devices is the rewinder machine. It is equipped with a plc computer programmer, and the tightness and size of the paper roll can be adjusted. The biggest highlight of this machine is variable frequency speed regulation, pneumatic control, automatic paper feeding, punching, glue spraying, automatic paper drop tube, embossing, etc., to achieve a multi-function machine.

The price of tissue paper making machine is determined by the degree of automation of the equipment. The higher the degree of automation, the more expensive the price.

• 

• 

Automatic paper cutter

The paper cutter is used in conjunction with a fully automatic rewinder machine. The whole machine has a firm structure, beautiful design, accurate paper cutting action, and a smooth cut surface of the roll paper. Compared with ordinary paper cutters, it has fast speed and strong stability. It is stable at 50-70 cuts per minute, and One machine can be used for multiple purposes. It can cut round toilet paper, flat toilet paper and pumping paper.

Automatic toilet paper packaging machine

The automatic toilet paper packaging machine is used in conjunction with the rotary automatic paper cutting machine to automatically bag and automatically seal the slit toilet paper; the machine adopts PLC controller and servo motor control, the whole machine has reasonable design, fine processing, and convenient and reliable configuration. , The performance is mature and stable, and the applicability is wide. Instead of manual operation, the bagging is automatically completed, and the finished product is beautiful. Various bagging and packaging machinery can be customized according to the user’s actual specifications.

• 

• 

The price of tissue paper making machine varies according to the degree of automation. If you want to invest in tissue making machine, you can contact us, we will provide you with detailed equipment information and give you the best price.

YG Machinery sells tissue making machine, automatic rewinder, wet tissue machine, wet tissue packaging machine, disposable PE glove machine, medical glove machine, mask machine, melt blown cloth machine and other machinery. The products sell well in South Korea, Peru, Turkey, Italy, Singapore and other countries. Complete processing equipment and thoughtful after-sales service can provide customers with equipment installation, debugging, and related technology until they produce qualified products.

Hydraulic pile breaker cuts: such as cast-in-place piles, precast piles, etc., from the shape of the broken pile head, it can be divided into circular pile breakers and square pile breakers. The pile breaker machine is widely used in high-speed railway bridges and pile foundation projects for industrial and civil construction.

The hydraulic pile breaking machine is a new type of pile breaking operation equipment, which uses the principle of hydraulic pressure to controllably split objects. Especially in places where there are strict restrictions on dust, flying debris, vibration, noise, and exhaust gas emissions, the concrete pile breaker has its irreplaceable advantages. This machine is suitable for cutting round and square pile heads in pile foundation projects such as high-speed railway bridges, industrial and agricultural constructions, etc. Remote control by construction machinery.

• 

• 

The hydraulic pile cutter is mainly composed of a power source and a working device. The working device is composed of multiple hydraulic cylinders of the same model combined into pile breakers of different diameters to meet the requirements of pile breakers of various diameters. The piston of this cylinder It is made of alloy steel and can meet the crushing requirements of various grades of concrete.

Advantages of Hydraulic Pile Cutting Machine:

1. Pile cutting machine, realization rate, low noise pile breaking;

2. Modularization, through the combination of different numbers of modules, the pile heads of different diameters can be cut;

3. High cost performance, low operating cost, and cost performance is completely close to foreign products;

4. The pile breaking operation is simple, does not require skills, and the operation is quite safe;

5. The pile breaker machine can be connected with a variety of construction machinery to truly realize the versatility and economy of the product. It can be hung on construction machinery such as excavators, cranes, and telescopic booms.

• 

• 

The concrete breaker machine has a simple operating system and fewer personnel to reduce construction costs; the overall pile head is crushed to solve the problem of high energy consumption in crushing construction; the retractable hanging chain design meets the requirements of multi-terrain construction operations; full hydraulic Driven to achieve low-noise operation of pile head construction; rapid assembly design to achieve convenient transportation and construction, and improve construction efficiency; the application of new materials and new processes improves equipment reliability and reduces maintenance costs; simple modular replacement design and general purpose Technology, to achieve rapid maintenance, effectively improve the life of the whole machine; long life design, bring benefits to customers. The hydraulic pile cutter is a kind of engineering machinery suitable for quick removal of pile heads in pile foundation engineering.

The fog cannon dust suppression has ahead of 30-120 meters and is divided into two specifications: remote control type and manual type. It is suitable for construction site dust removal, factory dust removal, highway vehicle dust, large gardens, green trees, road protection forests, lawns, etc. spray humidification, coal yards, power plants, steel slag yards, iron ore yards, loading and unloading yards, railway freight yards, Urban roads, prevention of plant diseases and insect pests, can also be used in environmental protection industries, coal and other material storage yards that are prone to dust, spray water to prevent dust, remove dust, suppress dust, and cool down. Dust suppression cannon adopts horizontal 360° free rotation and vertical -10°~45° up and down pitch adjustment function, 360° full coverage, no dead angle spray, to ensure that there is no dead angle in the whole process of dust removal. It is sprayed for an average of 8000 hours of trouble-free work, highly intelligent, simple to operate, and convenient to maintain. This product can be moved or fixed in one place and has a wide range of applications.

• 

• 

Main features of fog cannon machine:

1. Long-range, wide-coverage, high work efficiency, can achieve precise spray;

2. The sprayed mist particles are small, and when in contact with the dust, it forms a moist mist, which can quickly suppress the dust;

3. The supporting power is flexible, and it can be powered by three-phase 380V city electricity or diesel generator set;

4. It can be fixedly installed on a concrete pouring platform, or it can be installed on a transport vehicle with a diesel generator set;

5. Flexible operation, remote control or manual control, horizontal rotation, and spray angle can be adjusted at will, safe and reliable to use;

6. Compared with other dust control spraying equipment (spray gun, dust control water truck), the water consumption can be saved by 70% -80%, and the water mist coverage area is much larger than other dust control spraying equipment;

7. Mist cannons have a range of 60 meters to 200 meters, which can be configured according to the actual requirements of customers.

• 

• 

The fog cannon machine can include a complete set of water tanks installed on the sprinkler transport vehicle, with its own generator, good mobility, simple vehicle-mounted fog cannon machine, and excellent electronic control functions at work, which greatly enhances the operability and allows the driver to Drive to any dust-reducing area of ​​the demolition to spray dust, regardless of geographical restrictions, and the operation can be completed independently.

The fog cannon dust suppression can be installed on the roof of high-rise buildings and spray dust regularly every day. It can be used for a long time, effectively reducing the dust from road vehicles, increasing air humidity, and helping to improve the air quality of surrounding roads and communities. In actual use, the sprayed water mist drifts like a drizzle with the wind, and it floats on the face like a layer of sweat. It will not wet the clothes at all, and it will not get muddy on the ground. “The smaller the water mist, the easier it is to absorb fine particles, and the water consumption per hour is less, which is more water-saving than a sprinkler.

What exactly is the sandblasting machine used for? In fact, the sand blaster machine has many uses. Many people do not know the automatic sandblasting machine very well. In fact, sandblasting is very simple. It is to hit the surface of the workpiece at a certain speed to form a sandblasting machine. A certain degree of roughness, thereby improving coating adhesion, extending the anti-corrosion period, removing rust and paint, etc., can be used in daily life. In daily life, the most common denim clothes are whitened by sand blaster machine; as well as gold and silver jewelry, sand blasting machine is used. The most important thing is the surface pretreatment of various workpieces to improve Surface adhesion and anti-corrosion of the workpiece, etc. The specific uses are as follows:

• 

• 

1. The sand blasting machine is used for pretreatment: electroplating, painting, spraying, etc. All are covered by sandblasting before processing, the surface is clean, and the adhesion and corrosion resistance of the covering layer is greatly improved.

2. Used for cleaning: metal workpieces such as castings, stamping parts, welding parts, heat treatment parts, etc. to remove oxide scale, residue, dirt; surface cleaning of non-metallic products, removing black spots on the surface of ceramic blanks, and reducing paint patterns, etc.

3. Sandblasting equipment is used for light decoration: all metal products and non-metal products (plastic, crystal, glass, etc.) surface traces are eliminated, and the matte surface treatment improves the product surface quality.

• 

• 

4. Sandblasting equipment is used for the rework of defective products: the removal of the defective covering layer of the product, the removal of the poor coloring of the surface, and the removal of printing.

5. Used for strengthening: increase the surface hardness of metal parts and eliminate stress, such as surface treatment of aircraft blades, springs, machined knives, and weapons.

6. Sand blasting machine is used for refurbishment of old parts: refurbishment and cleaning of all moving parts such as automobiles, motorcycles, and electromechanical equipment. At the same time, fatigue stress is eliminated and the service life is prolonged.

7. The automatic sandblasting machine is used for etching and anti-skid processing: metal products, non-metal products surface etching patterns, text and anti-skid treatment, such as marble, handle anti-skid, seal, stone monument lettering, etc.

• 

• 

8. Sandblasting equipment is used for the treatment of denim clothes: denim clothes are frosted, whitish and cat whiskers are achieved. 5. Used for mold treatment: argon light matte surface treatment on the mold surface, graphic production, and mold cleaning, so as not to damage the mold surface and ensure mold accuracy.

9. The automatic sandblasting machine is used for burr treatment: remove the tiny burrs of machined parts, and eliminate the burrs of plastic injection parts.