The cement sprayer machine is a new type of decorative construction machine carefully developed and manufactured on the basis of screw supercharging technology, according to the quick-drying characteristics and high viscosity characteristics of plastering plaster. The mortar spraying machine is wear-resistant and durable and is easy to operate. The flow rate can be adjusted according to the material demand. Can spray plaster, elastic sculpture material, waterproof material. External wall insulation mortar. Tile adhesive, etc. According to material requirements, it is not restricted by regional and environmental conditions and the shape of the sprayed surface. Plaster spraying machine, mortar spraying machine, cement plaster spray machine use mortar spraying machine. Before spraying, the sprayed area should be infiltrated with water; when spraying, the nozzle should be as vertical as possible to the sprayed surface (the distance can be adjusted according to the spraying effect). Spraying, and coordinate with the leveling process. If the wall is too dry or the time after spraying is too long, it will seriously affect the flattening effect, and the process must be changed.

• 

• 

Features of cement sprayer machine:

1. In addition to the switch on the electric control box, it is also equipped with a remote control switch for spraying.

2. Adjust the flow rate to bring out the best spraying effect.

3. Suitable for spraying materials: putty powder, paint, latex paint, real stone paint, cement mortar, dry powder mortar, thermal insulation mortar, waterproof materials, fireproof materials, thermal insulation materials, sound-absorbing materials, and other water-soluble materials.

4. Small size, easy to carry on site, and low cost of accessories, simple maintenance.

5. The construction efficiency is high and the quality is good.

6. Easy to use, fast, save materials, labor, and more money. One machine only has three people, 150 square meters per hour (thickness 2cm).

7. The connection between the spray gun and the feeding pipe can be rotated for easy operation.

8. Material ratio (cement) 0.7:3 mortar.

• 

• 

The cement sprayer machine is mainly used for the spraying of walls, floors, and metal surfaces. It is especially suitable for the surface spraying of interior and exterior walls, office buildings, villas, hotels, shipbuilding, steel structures, bridges, and other construction equipment in the modern architectural decoration industry. An essential tool for modern surface spraying. In addition to the switch on the electric control box, the cement sprayer machine is also equipped with a remote control switch for spraying. The link between the mortar spraying machine and the feeding tube can be rotated for easy operation. The cement mortar spraying machine has high construction efficiency and good quality. The multifunctional spraying machine is small in size, easy to carry on-site, and has a low cost of accessories and simple maintenance.

• 

• 

A cement mortar spraying machine can be used in a wide range. In addition to walls, it can be used in many places, such as high-speed river embankment slope protection, tunnels, and subways. It is not cost-effective if only workers are used to completing these places. , And the concrete mortar spraying machine not only reduces the operating time of the workers but also improves the completion efficiency. If there is a large area of ​​operation, it is recommended to buy this spraying machine is very cost-effective.

To buy a sand blasting machine, you must choose a manufacturer with strength and quality assurance

The strength of manufacturers is often the best guarantee for product quality, because no company with a big brand will lose out because of small things, and they pay more attention to brand maintenance! Henan YG Machinery Co., Ltd. is a professional sandblasting machine manufacturer, which can customize sandblasting machines, sandblasting room, and portable sandblasting machines for customers. Have a professional design team and R & D department to provide you with installation and use tutorials.

• 

• 

Choose sandblasting equipment that suits your company’s processing capacity and workpiece size

 The production capacity of each enterprise is different, so it is necessary to choose according to the processing capacity of the enterprise: automatic sandblasting production line, semi-automatic sandblasting equipment, pressure sandblasting machine, general pressure sandblasting machine, etc.

Choose the appropriate air compressor according to the specifications of the sandblasting machine

The automatic sandblaster uses compressed air as power to form a high-speed jet beam to spray sand on the surface of the workpiece to be processed. Therefore, the sandblasting machine has the requirement of compressed air oxygen. The capacity of the air compressor should be determined according to the specifications of the equipment, and 20 % Margin to ensure the service life of the air compressor.

• 

• 

Choose the manufacturer that can provide the most effective after-sales service and after-sales guidance

  When buying an automatic sandblasting machine, don’t think that you can pay for it and pay for it. After-sales service is also necessary to pay attention to when buying a sandblasting machine. Generally, the professional knowledge and experience of the seller are not as good as that of the manufacturer. After all, the manufacturer has to understand a lot of machinery. , And the price will be cheaper than the dealer. YG Machinery is a professional construction machinery manufacturer.

Closer to home: YG Machinery not only has an advanced technical team and an excellent production team, but we also have a complete after-sales team! Provide customers with the most effective after-sales guidance and after-sales service, provide product updates and function improvement services, and regularly return visits to new and old customers and equipment maintenance.

PSA oxygen generator is a device for producing oxygen. The oxygen concentration can reach 95%. It is used to replace bottled oxygen and avoid the risk of the explosion of bottled oxygen. The principle of an industrial oxygen generator is to use air separation technology. Firstly, the air is compressed with high density and then the difference in the condensation point of each component in the air is used to separate the gas and liquid at a certain temperature, and then it is obtained by further distillation. Industrial oxygen is generally obtained through this physical method. Large-scale air separation equipment is generally designed to be higher in order to allow oxygen, nitrogen, and other gases to climb and fall through the principle of PSA oxygen generator

• 

• 

There is 21% oxygen in the air. The principle of PSA separation and production of oxygen is to physically extract high-concentration oxygen from the air. The separation of oxygen by PSA is a physical method, so the oxygen produced will not be mixed with other harmful substances. The quality of oxygen depends on the air quality and is better than that of air. The main parameters of an oxygen generator are power consumption and oxygen production. The oxygen production is usually reflected by the output oxygen flow and concentration. In addition, the important parameters of the oxygen generator include the pressure of the oxygen generator and the pressure of the oxygen output port. The core of the oxygen generator machine is a molecular sieve air separation oxygen generator with patented technology. An oxygen generator of different sizes is equipped with a corresponding air compressor to form an oxygen generator machine unit.

• 

• 

Technical characteristics of PSA oxygen generator

1. Easy to install;

2. The equipment is compact in structure, skid-mounted as a whole, and occupies a small area without infrastructure investment and low investment.

3. High-quality zeolite molecular sieve;

4. It has a large adsorption capacity, high compression resistance, and long service life.

5. More economical than other oxygen supply methods;

6. The PSA process is a simple oxygen production method. It uses air as the raw material. The energy consumption is only the electric energy consumed by the air compressor. It has the advantages of low operating cost, low energy consumption, and high efficiency. The integrated design of mechatronics and instrument realizes automatic operation.

• 

• 

7. Control fully automatic operation. The oxygen flow and pressure purity can be adjusted and displayed continuously, and the pressure and flow can be set to realize true unmanned operation. The advanced control system makes the operation easier, and high-quality components are guarantee stable and reliable operation.

PSA oxygen generator product composition

Cold dryer, gas storage tank, adsorption dryer, oxygen generator, oxygen control cabinet

PSA oxygen generator use

The oxygen concentrator generator is favored by the majority of users because of its significant advantages. It is widely used in metallurgical combustion, chemical, environmental protection, building materials, light industry, medical, aquaculture, biotechnology, sewage treatment, and other fields.

1. What is a hydraulic pile breaker

The hydraulic pile breaker machine is driven by hydraulic pressure and uses the power and lifting force of an excavator or hydraulic station to break piles. The advanced modular combination can quickly and efficiently cut off the pile heads.

2. The important position of the hydraulic pile breaker machine

The last step in the construction of the pile foundation is the removal of the pile head. The removal of the pile head is a key process that connects the earth excavation and the construction of the pile cap foundation. However, the removal of the pile head is indeed a step that is easily overlooked in the construction organization. Due to different pile positions, overfilling lengths, and importance, the broken pile (overall hoisting, broken hammer, and manual picking) construction technology must be selected reasonably. Ensure construction progress and quality, while saving costs. YG Machinery’s pile breaker machine uses hydraulic pressure to break piles many times faster than manually, which can shorten the construction period. Adopting modular advanced combination, it can be installed and quickly destroyed according to the diameter of different destroyed pile heads and is not restricted by region. It can also be connected with a variety of construction machinery, with simple operation and strong product versatility, which can reduce operating costs.

• 

• 

Simple: Modular structure, simple installation, equipped with different numbers of modules according to the pile diameter;

General: The hydraulic pile cutting machine can use the power of the excavator or the power of the hydraulic station;

Environmental protection: full hydraulic drive, low noise, static pressure construction, does not affect the quality of the pile;

Low personnel cost: It is mainly operated by one person of the excavator driver, and another person can be equipped with a supervisor;

Safety: The constructor is the driver of the excavator and does not directly touch the broken pile.

• 

• 

Installation and operation rules of hydraulic pile cutting machine

The operator of pile breaking must be familiar with the structure, performance, operation essentials, and safety precautions of the machine;

Hang the installed hydraulic pile cutter on the front end of the excavator or the front end of the crane, link the excavator pipeline or hydraulic station pipe;

Enter the construction site and put the hydraulic pile cutter on the pile head that needs to be broken;

Use the power of the excavator or the power of the hydraulic station to break the pile;

Move the hydraulic pile cutter down 30-50cm and continue to break the pile;

Repeat steps 3-5 until the pile head is destroyed. Clean up the broken piles.

• 

• 

Engineering application scope of pile breaker machine:

Hydraulic pile cutting machine cuts off: such as cast-in-place piles, prefabricated piles, etc.; from the shape of the broken pile head, it can be divided into circular pile cutting machines and square pile cutting machines. Pile breakers are widely used in high-speed railway bridges and industrial and civil construction pile foundation projects. Generally, circular pile breakers are suitable for pile diameters between 600-2500; square pile breakers are suitable for pile side lengths of 350-650, which can meet various requirements. Requirements for large-scale foundation construction.

Sterilize disinfection door, 360° no dead angle coverage, effective antivirus. When a person enters the disinfection channel, the disinfection system will automatically trigger, and the system will automatically atomize the configured hypochlorous acid water into a very fine mist through a powerful centrifuge. The diameter of the mist particles is> PM2.5, and the high-speed centrifugal nozzle is used. Spray the spray evenly on the space of the disinfection channel, so that the disinfection space is covered with dense disinfection spray. Coupled with the dispersion, extension, and penetration of the synergist, the spray will cover the whole body of the disinfected person and even small gaps. Effectively inactivate pathogenic microorganisms attached to human hair, body surface, clothing, and other parts, so as to achieve thorough, three-dimensional, and dead-angle disinfection of personnel.

• 

• 

1. Equipment structure

The intelligent disinfection door is mainly composed of a host and a channel. Specifically, it mainly includes an ultrasonic atomization device, a relay induction automatic start-stop device, an automatic dispensing device, an automatic liquid level control system, an anti-leakage device, a leakage protection system, and a disinfection channel. And windproof devices, etc. With a vivid display screen, personnel can watch the advertisement animation when passing through the disinfection channel.

2. Equipment material

 The intelligent atomization disinfection door mainframe and channel frame are all made of galvanized steel; the original medicine tank, water tank, and ultrasonic atomization box are made of 304 stainless steel; each cover plate of the equipment is made of iron plate/tempered glass, of which the iron plate is sprayed by spraying process Metallic paint, smooth and beautiful appearance.

3. Equipment usage

The atomization disinfection door is simple to operate and is suitable for crowded places such as stations, schools, banks, office buildings, military courtyards, office halls of various institutions, residential quarters, large factories, and vegetable markets. The whole process realizes non-contact disinfection, with high degree of automation and thorough disinfection. At the same time, the host of this equipment can also be designed to be used independently according to customer requirements, and the scope of use is extremely wide.

• 

• 

Smart atomization disinfection door

Because the intelligent atomization disinfection door is easy to operate, it can realize efficient disinfection. In order to control the spread of virus aggregation and cause cross infection, many sites have introduced a disinfection door. However, different places have different requirements for sterilization. Of course, different places have different requirements for the size of the smart atomization disinfection door. Our company can customize the disinfection door with different requirements according to the different types of hotels, schools, companies, and some special disinfection places. For more information about the disinfection door, please contact us in time, and our company will have dedicated technicians to answer your questions in time.

Fog cannon is used to spray dust and suppress dust in the coal storage shed of raw coal. Increasing the saturated humidity of the ambient air makes the materials less likely to raise dust; the use of water droplets smaller than 150μm to absorb dust in the dust-containing gas, and naturally settle under the action of gravity, thereby controlling the amount of dust in the coal storage shed.

1. Fans, water pumps, rotation, and pitch mechanisms are all driven by motors, with on-site manual and wireless remote control (within 100 meters of safe visual range) control functions, and the entire operation control can realize on-site (manual control), automatic control, and central control Indoor (remote on-site/automatic control) control operation, a single device or multiple devices can achieve simple operation, safety, and reliability.

• 

• 

2. Fog cannon dust suppression is equipped with winter heat preservation and heating system (self-controlling temperature). Explosion-proof type is selected for electric heating to prevent electric leakage. The thickness of the insulation layer is not less than 50mm.

3. The dust suppression cannon should be equipped with fans and safety protection devices. The blades of the fan must be made of corrosion-resistant aluminum alloy, and must not be made of high-strength plastics with low strength and easy loss, and must undergo a dynamic balance test before leaving the factory.

4. The parts of the fog cannon machine should meet the requirements of continuous operation in harsh environments for a long time. The equipment should be equipped with a water booster pump. The water booster pump must be a stainless steel multistage centrifugal water pump. Positive displacement pumps are not allowed.

• 

• 

5. Fog cannon dust suppression requires that the connection between the fan support frame and the fixed base should use a stronger slewing support structure, and no bearings, copper alloys, or polymer plastics with lower strength and easy to wear should be used. The connection between the fan and the base is connected by a fully sealed bearing with a seat. The temperature rise of the bearing should not exceed 40℃, and the temperature of the bearing should not exceed 80℃. The bearing seat adopts an external lubricating nozzle.

6. Fog cannon requires that the pitch mechanism be hydraulically driven and have a self-locking function to meet the requirements of the fan to move up and down within the range of -10º～+55º under working conditions. The fan base bearing adopts a fully sealed bearing with seat.

7. The nozzle of the fog cannon machine should be made of pure copper and adjustable.

8. The connecting piece of the water pipe of the equipment air cylinder and the water pipe of the fixed base must be a rotary joint to prevent the hose connection from being damaged due to continuous rotation for a long time. The hose adopts stainless steel explosion-proof tube.

• 

• 

9. All water pipelines are acid-resistant, alkali-resistant and corrosion-resistant, made of stainless steel 304, bolts are galvanized bolts, and bolts for special parts are high-strength bolts.

10. The mist cannons machine should be equipped with a stainless steel 304 water filter device, which is easy to disassemble and can be adapted to the water quality of the bidder without clogging the nozzle.

11. All materials and parts (or components) should meet the requirements of relevant specifications, and should be new and high-quality, and can meet the requirements of the local environment. The fan duct plate thickness is required to be ≥3.75mm. The base is made of national standard H180 channel steel. The base must have a hoisting device.

12. The on-site control box of the fog cannon configuration should be made of aluminum alloy and be explosion-proof.

13. Set a control box for each fixed dust controller, which should have dust-proof and splash-proof performance, and be explosion-proof, with a protection level of IP65 or above. It can realize local manual, remote and remote automatic control. The electrical components in the control box are Chint components or products of the same quality brand.

First of all, the most important part of the toilet paper processing project is to choose tissue making machine. When choosing tissue paper making machine, the quality of the equipment should be put first, and then the price factor. Friends who only care about the price of tissue making machine must not Reasonably, from a long-term perspective, even if the tissue paper making machine is more expensive, as long as the tissue making machine is easy to use, we still recommend that you choose a higher-priced device.

Because every price is worth quality, this is the eternal truth in all industries. If we choose the cheapest tissue paper manufacturing machine, we can see that we have saved some expenses at the time, but later in the process of processing toilet paper, tissue There are some problems in the making machine, we need to stop production, which will do more harm than good to us, so before preparing for the toilet paper processing project, we should reasonably prepare the purchase budget of the toilet paper machine and choose the equipment that suits us.

• 

• 

Tissue Making Machine Price

The machine for processing toilet paper is the rewinding machine, and the tissue making machine is a three-in-one device including a rewinding machine, a paper cutter, and a sealing machine. In terms of production function, toilet paper processing equipment can be divided into automatic rewinder and semi-automatic rewinder. Since the semi-automatic rewinding machine is worse than the fully automatic in terms of productivity and efficiency, it is gradually eliminated from the market. Now many buyers will directly choose the fully automatic rewinding machine. It can complete and automatically load paper, roll paper, trim, cut paper, spray glue, and seal glue. The fully automatic rewinding machine is deeply loved by customers because of its high degree of automation. Manufacturers divide the equipment into different models, and there is a certain gap in price. For more detailed paper machine prices, you can contact us and add my WhatsApp+86 13598866720.

• 

• 

The rewinding machine is one of the most commonly used equipment at present, and it is also the most commonly used tissue processing equipment for tissue entrepreneurs. The machine is developed in accordance with the development needs of current customers. It adopts frequency conversion speed regulation, pneumatic control, Hole, automatic paper-pushing, automatic upper bar, drawing shaft flattening, automatic trimming, and glue spraying are all in one. It is your equipment for producing high and middle-grade toilet paper, reducing loss, and improving economic efficiency. The fully automatic rewinding machine produced by our factory is the ideal equipment for the production of sanitary roll paper. Since its launch on the market, it has been well received by domestic users, and its production and sales have continued to increase.

The fogging sanitizer machine is usually composed of high-voltage generating circuit negative ion generator, micro fan, air filter and other systems. The micro-fan in the disinfectant fogging machine is used for indoor air circulation, and the polluted air passes through the PM2.5 filter and activated carbon filter in the machine to adsorb and filter out various pollutants. Then, a large amount of negative ions generated by the negative ion generator through the air outlet will be sent out by the micro fan to form a negative ion airflow, which is a defective fogging machine. At present, there are many types of atomization disinfection machines, including those suitable for hospitals, households, and public places.

• 

• 

The function principle of disinfectant fogger machine:

The hydraulic pressure is mainly converted into mist through high temperature technology, which produces antibacterial and sterilization effect, and the sterilization effect is as high as 99.9% (most importantly, it is not harmful to the human body or children). Each spraying is about 20 square meters for 30 seconds, each bottle of 100 ml of disinfectant can be sprayed 10 to 12 times, 100 ml can disinfect about 200 square meters, and 0.1 square meters per square meter, which is quite economical.

• 

• 

Detailed description of functions and characteristics:

1. Simple operation: Fogging sanitizer machine is designed to work manually and automatically. In addition, there are power indicator lights, working indicator lights and power instructions, which are convenient and direct to operate.

2. Very fine atomization: The sprayed disinfectant is misty, with very little graininess and large amount of mist. Can diffuse into every corner of the room.

3. Minimal noise: The fogging sanitizer machine produces minimal noise when working, and almost no noise.

4. Automatic water replenishment. This product is equipped with automatic water refilling function. It can be used for 3-5 days for adding water and medicine at a time, which reduces labor and is convenient to use.

5. Digital display: The disinfection time can be adjusted according to the user’s needs and the area of ​​the disinfection channel, which is convenient and practical.

6. Voltage stabilization protection: The main power supply can be used to stabilize the output, which can better protect the host when the voltage is unstable and prolong the service life.

• 

• 

Disinfectant fogger machine product advantages:

1. Sterilization and deodorization, play a role in cleaning the environment and fresh air.

2. It can inhibit and eliminate bacteria and harmful gases in the air, and the effect is remarkable.

3. 360-degree disinfection without blind spots: large amount of fog, small particles, can diffuse to all corners of the room to achieve 360-degree disinfection without blind spots.

4. Safe, economical, effective, low cost, and good atomization effect.

5. Flexible setting and layout can be moved according to the working area.

6. The equipment has high degree of automation, low power, easy to use, and the equipment is more durable.

Disinfection door can quickly and accurately screen out suspected persons with “high temperature” from high-traffic populations in public places, and concentrate the pre-isolation and control of possible sources of infection, which plays a positive role in restraining the spread of the epidemic and improving the defense and control capabilities of the epidemic. effect. High-traffic public places such as airports, schools, subways, hospitals, ports, and office buildings are key areas for epidemic prevention and control. The abnormal body temperature screening of these places must ensure basic order and efficiency while ensuring screening. High efficiency and precision.

• 

• 

The temperature measurement system of the intelligent temperature measurement disinfection door is based on infrared imaging and face recognition technology, which can accurately identify and lock every (abnormal) fever sign in the crowd at one time, ensuring the safety of high-traffic places. Its intelligent disinfection system is based on human perception technology and adopts medical-grade disinfectant, which is safe and efficient. After detecting that a person enters the disinfection range, it will automatically start the disinfection process. Its micron-level rapid atomization disinfection system can realize every person who passes through the door. Perform full-coverage disinfection including the soles of the feet. Personnel do not need to stop when passing through the access control system, and disinfect immediately.

• 

• 

Features of disinfection channel:

1. Automated disinfection: the whole process is fully intelligent and automatic, no need for human operation, saving worry and effort;

2. It has two control methods: automatic induction and manual operation. The controller can be set to one-way spray or two-way spray

3. Electronic lock function: the disinfection door lock cannot be opened during disinfection, and the lock automatically opens after the disinfection is completed to realize forced disinfection and ensure the disinfection effect;

4. Mist particles: The disinfection door mist particles are only about 10 microns and have strong permeability. As long as the odorless disinfectant is selected, there will be no discomfort;

• 

• 

5. Intelligent voice function: voice reminder of working status, voice can be synthesized according to customer requirements, epidemic prevention and disinfection door, scientific and humanized.

6. The disinfection door is equipped with an automatic ground sprinkling function: further disinfect the soles of the feet of the people entering and exiting, and then achieve a thorough disinfection.

7. Durable: Disinfection door has a long life, less maintenance, and the system is safe and reliable.

8. The machine atomization box can be evenly distributed, and it is suitable for a disinfection room with a slightly larger area.

9. The control box power supply has a voltage stabilizing function, which can better protect the host when the voltage is unstable and prolong its service life.

In recent years, people’s demand for wet wipes has increased. Sanitary wipes, disinfection wipes, baby wipes, etc. have also given birth to the production of wet wipes. At present, the small wet wipe machines on the market have single-chip four-side-sealed wet wipe machines, and there are multiple wet wipes making machines that can produce hundreds to thousands of wet wipes per minute, and are fully automated, such as supermarkets, gas stations, hotels, maternity and baby supplies stores, etc. We can see that all kinds of wet wipes are produced through the wet wipe production line. The actual demand is different, and the price of the production equipment is different. Please consult the manufacturer for the specific price of the small wet wipes making machine.

To adapt to market demand, the company has now launched: wet wipes production line, wet tissue packaging machine, wet tissue folding machine, 80-piece wet tissue machine, single-piece wet wipe machine, multi-piece wet tissue making machine, wet tissue sticking machine and other wet tissue equipment Manufacturing and sales of its accessories.

• 

• 

Performance structure and characteristics of wet wipes making machine:

1. The working principle of wet wipes making machine: automatic feeding of raw materials → heating and embossing → stamping and cutting → arranging and discharging → scrap rewinding, which is completed automatically.

2. The equipment is equipped with a steel roller to steel roller heating and embossing device. When embossing is required, the embossing can be adjusted. When embossing is not required, the embossing roller can be raised to achieve the purpose of non-embossing. (According to customer requirements Custom pattern)

3. The wet wipe machine is equipped with a complete set of circular cutter forming molds. The materials are all made of imported high-quality special steel. Among them, the four groups of circular cutters are arranged in a reasonable dislocation type to reduce the loss of raw materials to a low level and the relative product cost Reduce and improve product efficiency.

• 

• 

4. The equipment is equipped with three adjustable tension control devices to adapt to the production of various materials. It is also equipped with an automatic scrap rewinding device, which can automatically recycle scraps.

5. The transmission of the cutting part of the equipment adopts cam-type mechanical transmission, with accurate punching and no burrs.

6. The overall frame is made of international standard shaped steel, the surface is treated with rust prevention, and the welding size of the frame is accurate. The main components of the standard screws are made of domestic high-quality 45# steel and hexagonal socket screws. The table and the parts that are likely to cause hygienic effects on the product are all Made of 304 stainless steel.

7. The wet wipes manufacturing machine adopts high-precision frequency conversion and related electrical appliances to control the operation, and the electrical wiring specifications are reasonable, safe, neat and operated.

Make it easy.

• 

• 

YG Machinery Equipment Co., Ltd. manufactures non-woven fabrics, napkins, and wet wipes equipment, integrating production and scientific research, sales services, and logistics. Main products: non-woven bag making machines, folding machines, printing machines, slitting machines, wet tissue folding machines, slicers, slitting rewinders, packaging machines, toilet paper machines and other mechanical equipment.