The fog cannon dust suppression uses a high-pressure device to atomize the water to produce water particles the size of dust particles. The water mist is sent to the upper hole about 60 meters using a high-power fan and combined with the adsorption of dust particles suspended in the air. The dust particles will fall to the ground quickly due to gravity. So as to achieve the purpose of removing smog. The fog cannon machine can increase the moisture in the air and reduce the damage to the body caused by diseases. The installation method of dust suppression cannon is more flexible. It can not only be fixedly installed on the plane of concrete or steel structure but also can be installed on the vehicle for mobile spraying. And the operation and control of the whole equipment are flexible. It is safe and simple to use. It can not only spray at a horizontal angle but also work at a vertical pitch angle.

• 

• 

What are the characteristics of a fog cannon machine:

1: Dust suppression on sandstorms and demolition sites can be carried out at any time, which not only prevents unnecessary labor managed outside the scope of operations but also prevents the spread of dust in a large area.

2: Save investment. Fog cannon truck belongs to the vehicle-mounted mobile, highly mobile, independent equipment deployment, optional generator, water tank equipment deployment, etc., easy to place and use, no need to invest a lot of civil engineering and other basic equipment deployments Regardless of the geographical location and situation of the stockyard, no secondary investment is required for changes in equipment deployment and utilization as usual. It covers a wide area, can be remotely controlled, and is convenient to use.

3: Fog cannon machine is applicable to static pollution sources and dynamic pollution sources. It can remotely adjust the degree of rotation spray angle, use quietness, mobility, and convenience, and save human resources.

• 

• 

4: For places where there is a large amount of dust such as reclaimers, stackers, bulldozers, etc., the environmental protection fog cannon dust suppression can be remotely controlled, and the directional spray can remove dust and purify the situation.

5: Dust suppression cannon’s water tanks, pipelines, pumps, and motors all have a heating and anti-freezing plan. When used in winter, it will not cause freezing and damage to the installation and deployment of equipment. Good atomization result, even spraying, low power consumption

6: The vehicle-mounted dust cannon can atomize the water into 30um～200um water mist particles, spray evenly, and the size of the fog can be adjusted according to user needs. The water mist is evenly sprayed to the material layer, which will not cause a large amount of water on the ground of the material garden, especially to prevent large areas of freezing and ice in winter, affecting the working surface, and at the same time, it will not cause secondary pollution.

What are the advantages of a mini road roller?

1. The vibrating mini road roller of the same quality has a better compaction effect than the static effect mini roller compactor; the compactness after compaction is high; the reliability is good.

2. The production and manufacture of the vibration mini roller compactor are highly efficient. When the specified compactness is the same, the number of compactions is small.

3. Because the compactness of the L-band is recorded in the application of the vibration mini road roller, the driver can deal with the weak links in the construction road surface in time, and take preventive measures anytime and anywhere, thereby greatly reducing the quality and safety hazards.

• 

• 

4. When tamping the overall surface of the asphalt mixture, due to the vibration effect, the bitumen raw materials of the overall surface can be fully penetrated and softened with the rest of the stone. Therefore, the ground has good wear resistance and a low failure rate.

5. When tamping the asphalt mixture, allow the temperature of the asphalt mixture to be lower.

6. It can compact large-size backfilled earth and rock materials that can not be compacted by the mini roller compactor with an isostatic effect.

7. Because of its vibration effect, it can be compacted and forced to dry cement concrete.

8. When the actual effect of compaction is the same, the construction quality of the vibrating road roller is twice as light as the static effect road roller machine, and the output power of the car engine can be reduced by up to 30%.

• 

• 

What is the price of a mini roller compactor?

Nowadays, there are many well-known brands of road roller machines on the market, and the prices are not the same, but the price of mini road roller is mostly between tens of thousands to hundreds of thousands. When buying roller compactor, many customers must be vigilant and look for a Reliable manufacturer.

• 

• 

Main application areas of mini roller compactor

1. Sublayer compaction of cement stabilized layer in highway municipal maintenance and replacement construction; compaction of asphalt concrete at the edges and corners of ditch wells; large-scale road construction when pipe culverts, passages, abutments, and other structures are backfilled Compaction operations in areas where the roller machine cannot work;

2. Municipal garden landscape, real estate residential area landscape, pavement of access roads in golf course construction, and pavement of sidewalks are compacted;

3. Other construction sites with narrow construction areas and sensitive to the weight of compaction equipment can complete compaction work flexibly and efficiently.

One of the most concerned questions of the veterans who operate water well drilling rigs is: “How to make the service life of the water well drilling machine longer?”. Of course, different usage methods and different construction environments will have different effects on the service life of the water well drilling machine.

The length of the service life of the water well drilling machine is a man-made problem. Correct operation, repair and maintenance not only ensure the safety of water well drilling equipment construction, extend the service life of the drilling rig, and the service life of maintenance, but also save expenses and reduce costs. As we all know, many factors affect the service life of water well drilling equipment. In order to make your water well drilling rigs last longer, what should you pay attention to?

• 

• 

1. Operators should operate in accordance with the specifications

For small water well drilling rigs operators, they should master the operating skills of the equipment, operate the water well drilling rig correctly in accordance with the safety technical specifications, and avoid moving the working device components to the extreme position to cause strong impact; Understand the principle, understand the performance), “Four Meetings” (be able to maintain, inspect, use, and troubleshoot common faults); not only know how to operate the equipment, but also know the equipment and inspect and maintain the equipment, so as to ensure the small water well drilling machine The service life is longer.

• 

• 

2. Don’t neglect maintenance due to tight schedule

The construction unit should not ignore the importance of maintenance because of the tight schedule, ignore the maintenance of water well drilling rigs, mistakenly believe that as long as the equipment is running normally and there is no major failure, it can sit back and relax; failure to maintain it in time will cause great hidden dangers. , There are many major accidents that have accumulated over time. When the accident happens, it is too late. Therefore, we should not forget the maintenance of water well drilling equipment in order to catch up with the construction period.

3. Use qualified accessories and oil

When repairing portable water well drilling rigs, you can’t just replace the spare parts just because it is cheap, and replace the inferior parts products, so that the probability of failure in the later period will increase. Also, when changing oils such as engine oil, hydraulic oil, gear oil, etc., you must also choose the appropriate type of water well drilling machine oil.

• 

• 

4. The repair method should be proper

You can’t wait to repair the water well drilling machine until you have to repair it. When you find a fault, you should troubleshoot and repair it in time. For example, track pins of water well drilling equipment, diesel engine cylinder liners, etc., are often subjected to unidirectional load during operation, resulting in unbalanced wear. If the location of the unbalanced load parts is replaced in a timely manner to balance their wear, it can be Extend its service life.

5. Reduce the environmental impact on water well drilling equipment

Many users ignore the impact of environmental climate on the life of water well drilling machines. Many well-known water well drilling equipment are basically open-air operations. Depending on the project to be connected, the location of the work will also change, and the equipment is easily affected by factors such as the site’s temperature, environment, and climate. If it is water well drilling rigs that work on a fixed site for a long time, it is best to have a stand (shed) or use an upper cover to minimize the damage caused by the sun and rain. Therefore, corresponding machine protection measures should be taken according to the climate environment.

The sandblast machine is a kind of sand processing machine that can use compressed air power to spray on the surface of the workpiece. The process of cleaning and roughening the surface of the substrate through the impact of high-speed sand flow. The portable sand blasting machine uses compressed air as the power to form a high-speed jet beam jetting material (copper ore, quartz sand, emery, iron ore, Hainan). . sandblasting equipment Due to the impact and cutting of the surface of the workpiece by the abrasive action, the surface of the workpiece is clean and different in roughness, and the mechanical properties of the surface of the workpiece are improved, thus improving the fatigue resistance of the workpiece and increasing its adhesion to the coating. Focus on extending the durability of the coating, which is also conducive to the smooth decoration of the coating. So, what is the use method and process of the automatic sandblasting machine?

• 

• 

1. Before use

Turn on the air source and power supply of the sand blaster machine, and turn on the power switch on the electric box. Set the pressure of compressed air into the spray gun through the pressure-reducing valve to be between 0.4 and 0.6 MPa as required. When choosing a suitable grit blasting machine to add sand, it must be added slowly to avoid clogging.

2. In use

To stop using the automatic sandblasting machine, the power and gas supply of the sand blasting machine must be cut off. Check whether there is any abnormality in each part, and check whether the pipeline connection is firm. Please do not throw anything other than the specified abrasives into the working room, so as not to affect the circulation of abrasives. The surface of the workpiece to be processed should be dry.

Note: Do not start the compressed air when the spray gun is not fixed or held!

• 

• 

3. After use

If you need to stop processing in an emergency, press the emergency stop button switch, and the sand blaster machine will stop working. Cut off the power and air supply of the machine. If you want to stop the shift, clean the workpiece first, turn off the spray gun switch; let it flow back to the separator. Turn off the dust collector. Turn off the power switch on the electrical box.

The automatic sandblasting machine is a modern high-efficiency, cost-effective casting cleaning equipment with low investment. The sand blaster machine is usually used to remove rust and rust on the surface of easily corrosive materials or workpieces and to remove oxide scales on non-rusty metals. deal with. In daily work, the operating procedures of the portable sand blasting machine are directly related to the safety of production.

Fog cannon dust suppression uses the principle that dust can be agglomerated and increased by bonding with water, allowing fine dust to pass through the interaction of equal diameter water droplets, reducing the tension on the water surface, and making dust particles agglomerate with water mist. , Under the action of gravity, it finally settles to the ground. When the size of the fog particles is close to that of the dust particles, the dust reduction effect is best. The fog cannon machine can spray water mist 120 meters away and 70 meters high. Compared with ordinary sprinklers, the water mist particles sprayed by the dust suppression cannon are extremely small. In haze weather, it can spray dust, decompose and desalinate the particle concentration in the air. , The polluting particles floating in the air are quickly forced down to the ground to achieve the effect of cleaning and purifying the air.

• 

• 

Let’s start with the working principle of dust suppression cannon, using a high-pressure water pump and atomization module to make the water reach the atomization state. Then the high-pressure centrifugal fan generates wind power to spray out the water mist, and the water mist absorbs the dust particles in the air. It increases the weight and settles naturally, so as to achieve the effects of dust removal, cooling, and air purification. Then there is the unique design of mist cannons machine, bullet spray design; the distance of dust suppression spray is longer, and the dust suppression effect is better. 360°no dead angle jet, wider dust reduction coverage, stainless steel shell more beautiful and durable. Fog cannon dust suppression has a wide range of applications. It is widely used in coal fired plants, power plants, steel slag yards, iron ore yards, loading and unloading yards, ports, railway freight yards, construction sites, urban roads, etc.

• 

• 

The role of fog cannon machine

Dust suppression cannon is a combination of water mist sprayed by a high-pressure atomization device and dust particles in the air and agglomerated into clusters and finally, fall to the ground under the action of gravity to achieve the purpose of dust removal. The smaller the water mist particles, the better the dust removal effect. , The mist cannons machine produced by Henan YG Machinery has a water mist of 10~150 microns, and the dust removal efficiency is relatively high.

• 

• 

Application scope of mist cannons machine

Dust suppression cannon is suitable for open-air material storage yard, coal logistics park, open-pit mine mining, open-air blasting dust, closed unloading area, truck unloading port, dump truck unloading dust, working dust of large loading truck, loading and transporting coal at coastal ports, and transferring coal, Ore, bulk powder handling and other dust pollution control; building construction demolition dust control, construction garbage or waste residue unloading and shipping, local dust control of mechanical operations, road dust pollution control in heavy vehicle transportation; airport, highway, Stations, wharves, public places, sports venues, hot venues, etc., reduce dust, moisturize, and disinfect.

Hydraulic rock splitter, also known as concrete splitter, is high-end mining equipment that can replace explosive blasting, an expert in silent rock blasting, an upgraded product of hydraulic rock splitter, and the new favorite of geotechnical engineering. The successful development of the rock splitter machine will mean that instead of explosives to split rocks, mining mines will gradually become a reality. Hydraulic rock splitter is a new type of rock splitting device that replaces explosives. 9-12 small pistons similar to jacks are arranged on the rock splitter machine body (cylinder body). When working, the splitter is placed in the pre-drilled hole. When the ultra-high pressure oil of 120-150MP is provided to the splitter, the small piston will extend and directly exert a force on the hole wall, so that the rock extends the direction of the hole. Split to achieve high efficiency, no vibration, and safe rock breaking.

• 

• 

Compared with traditional rock splitter machine, hydraulic rock splitter instead of explosive has the following advantages:

one. Comparison of splitting force: The theoretical splitting force of hydraulic concrete splitter is 1200-1500 tons; while the theoretical splitting force of rock splitter machine is only 400-600 tons;

two. Splitting depth comparison: rock splitter splitting depth is 2-4 meters; rock splitter machine splitting depth is only 1-2 meters.

Summary: The hydraulic concrete splitter is more than twice the strength and splitting depth of the splitter. Rock splitting equipment is a deep splitting. Concrete splitter can only do surface splitting. Compared with the effect, the splitting stick is better.

• 

• 

The main application areas of rock splitting equipment:

1. For medium and large stone yards without blasting, use rock splitting equipment to split stones to obtain larger stones.

2. Open-pit mining of metal mines such as gold, silver, lead, lead, aluminum, and the use of rock splitter machine with DTH drilling can quickly split the ore body, safe, efficient, and vibration-free.

3. When a huge rock needs to be split when digging a subway tunnel under a city building, and explosives cannot be used, the rock splitter machine can be used to split the rock effectively.

4. The splitting and removal of large rocks in geotechnical engineering can replace the pneumatic pick, the breaking hammer, and the expansion agent to excavate the mountain without blasting.

Why is it said that sandblasting is the most thorough, versatile, and extensive method of surface cleaning? The sand blaster machine is more efficient, thorough, and cheaper than other pre-treatment processes. The grit blasting machine allows your workpieces to be freely selected in terms of cleanliness and roughness. Sandblasting equipment can be used for metal corrosion layer, residual salt and oxide layer on the surface of heat-treated parts, the oxide layer on the surface of rolled parts, oxide layer on the surface of forging parts, the oxide layer on the surface of welding parts, sand and oxide layer on the surface of castings, old The surface of the machine parts, etc. are processed. The automatic sandblasting machine can also change the surface roughness of the workpiece and can produce a matt or diffusely reflective workpiece surface to achieve the purpose of finishing. Therefore, sandblasting equipment is widely used in the foundry machinery industry.

• 

• 

How to choose the right sandblasting equipment?

1. Generally speaking, the effect of sandblasting is mainly determined by the parts materials and sandblasting abrasives. According to different parts and materials, the range of sandblasting abrasives can range from strong metal abrasives to soft resin abrasives. Dry sandblasting and wet sandblasting machines are also key considerations.

2. The production efficiency determines the type of equipment. Choose an automatic sandblasting machine, semi-automatic sandblasting equipment, press-in sandblasting machine, suction sandblasting machine according to processing capacity.

3. The size of the workpiece determines the equipment specifications. Choose the size of the cabin according to the size of the workpiece, so that there is enough space to complete the processing work.

• 

• 

4. Compressed air requirements. Determine the capacity of the air compressor according to the equipment specifications, and leave a 20% margin. The infrared carbon and sulfur analyzer can protect the service life of the air compressor.

Choosing the right sandblasting equipment determines the product treatment effect. During the pre-treatment of the sandblasting process, the quality of sandblasting sometimes suffers from defects. For example, the pressure is not enough, the roughness is not enough, and the surface of the product is relatively flowery. Speaking of the pre-treatment process, I have to mention the two-in-one degreasing and rust removal technology developed by Henan YG Machinery. It uses international advanced formulas to remove oil rust and scale at one time. During the production process, no acid mist will be generated, which is beneficial to environmental protection.

The sandblasting machine uses compressed air as the power to form a high-speed jet beam to spray materials (glass beads, steel shot, steel grit, quartz sand, emery, iron sand, sea sand) onto the surface of the workpiece to be processed at high speed. Laser The cast iron platform of the cutting equipment changes the mechanical properties of the surface of the workpiece. Due to the impact and cutting action of the abrasive on the surface of the workpiece, the surface of the workpiece obtains a certain degree of cleanliness and different roughness, so that the mechanical properties of the workpiece surface are improved. Therefore, the sand blaster machine improves the fatigue resistance of the workpiece, increases the adhesion between it and the coating, extends the durability of the coating film, and is also conducive to the leveling and decoration of the coating, and removes impurities, variegated colors, and oxidation on the surface. The layer is removed, and the surface of the medium is roughened at the same time so that the residual stress on the surface of the substrate and the effect of improving the surface hardness of the substrate is improved.

• 

• 

Purpose of automatic sandblasting machine:

1. Cleaning the surface of the workpiece;

2. Pre-treatment of the workpiece surface coating;

3. Change the physical and mechanical properties of the workpiece to improve or reduce the surface roughness, improve the surface lubrication state, reduce the movement noise of the workpiece, and increase the friction coefficient of the surface;

4. Finishing processing on the surface of the workpiece.

• 

• 

Inhalation Sandblasting Equipment:

1. General composition: A complete suction dry spray machine is generally composed of six systems, namely structural system, medium power system, pipeline system, dust removal system, control system, and auxiliary system.

2. Working principle: The suction type dry automatic sandblasting machine is powered by compressed air, and the negative pressure formed in the spray gun by the high-speed movement of the airflow, sucks the abrasive into the spray gun through the sand pipe and shoots it through the nozzle, and sprays it to the surface to be processed, To achieve the expected processing purpose. In the suction dry sandblasting machine, compressed air is both the feed power and the acceleration power of the jet.

• 

• 

Press-in Sandblasting Equipment:

For the press-in dry automatic sandblasting machine, we focus on the press-in sandblasting work unit, that is, the basic work unit composed of a pressure tank and a spray gun.

1. General composition: a complete press-in dry sandblasting machine working unit is generally composed of four systems, namely pressure tank, medium power system, piping system, and control system.

2. Working principle: The press-in dry sandblasting machine is powered by compressed air, and the working pressure established by the compressed air in the pressure tank presses the abrasive into the sand pipe through the sand valve and ejects it through the nozzle. The processed surface achieves the expected processing purpose. In the press-in dry sandblasting machine, compressed air is both the feed power and the acceleration power of the jet.

• 

• 

Water Sand Blasting Machine:

Compared with the dry sand blasting machine, the biggest feature of the water sand blasting machine is that it can well control the dust pollution during the sand blasting process and improve the working environment of the sand blasting operation.

1. A complete liquid automatic sandblasting machine is generally composed of five systems, namely structural system, medium power system, pipeline system, control system, and auxiliary system.

2. Working principle: The wet sandblasting machine uses the grinding liquid as the feed power of the grinding liquid, and the uniformly stirred grinding liquid (mixed liquid of abrasive and water) is delivered to the spray gun through the grinding liquid pump. As the acceleration power of the grinding liquid, compressed air enters the spray gun through the air pipe. In the spray gun, the compressed air accelerates the grinding liquid entering the spray gun, and is ejected through the nozzle and sprayed to the processed surface to achieve the expected processing purpose. In the grit blasting machine, the grinding fluid pump is the power for supplying materials, and the compressed air is the acceleration power.

The automatic baby wipes production line is special equipment for producing disposable household cleaning wipes or baby wipes. This wet wipes production line is driven by a fully functional servo, full servo control, independent operation of the color LCD touch screen, reliable, simple, convenient, flexible, stable performance, and advanced technology. The fully automatic baby wet wipes production line has advanced technology, stable performance, low product defect rate, high speed and high efficiency, and can fully guarantee safe production. It is a practical device for small and medium-sized enterprises to produce large packs of wet wipes.

• 

• 

YG Machinery can be customized according to customer requirements. The wet tissue machine runs smoothly at high speed, has stable performance, and is easy to operate. It is an ideal choice for customers. Have assured after-sales service. The products sold are: wet tissue machine, sanitary napkin machine, tissue making machine, packaging machine, slitter rewinder machine, etc.

The fully automatic baby wet wipes machine produces disposable wet wipes for hotels, restaurants and travel. Speed ​​200 packs/min. It is suitable for dust-free paper, non-woven fabric and other base paper materials. The cloth holder and the film axis are automatically connected, which reduces the time for replacing raw materials and effectively improves work efficiency.

• 

• 

How to choose wet wipes making machine?

1. Packages per minute the packaging design speed can reach. The wet wipes making machine performs a series of operations such as folding, forming, bagging, adding liquid, and sealing the non-woven fabric to output the finished product.
2. Attention to the price, but not only the price. If you only care about the price, you may be deceived when you pay attention to the packaging machine. Some wet wipe machines are very cheap because the components of the wet wipe machine and the packaging machine have different internal principles, so their service life is also different.
3. When purchasing a wet wipes manufacturing machine, you should try to choose a manufacturing company with R&D capabilities and ensure after-sales service. If the wet wipes making machine is used for a long time, especially in the case of continuous operation and overload, some electrical and mechanical failures are prone to occur, such as improper sealing, shutting down, and leaving the machine, and blowing the fuse during startup. It also emits noisy noise during operation, uncontrollable temperature, deformation and bending of the finished packaging bag at the seal, and bubbles or irregular marks on the stamping part of the sealing knife. Therefore, the wet wipe machine needs to be maintained and maintained daily to extend its service life.

The road marking company shares on the road line marking machine. The most commonly used hot-melt road marking equipment are: hand-push thermoplastic marking machine, walk-behind thermoplastic line marking machine, vehicle-mounted thermoplastic road marking machine, and ride-on thermoplastic road marking machine, hot-melt marking car and hot-melt kettle, etc.

• 

• 

Hand-push and hand-held thermoplastic road marking machines are no longer new gadgets, especially in highway marking projects, they will gradually be used by ride-on road marking machines with high construction efficiency, good safety performance, and low labor costs. Instead, the ride-on line marking machine draws some complex graphics with its own flexibility. The ride-on road line marking machine has relatively high construction efficiency, high marking quality, and safe high road marking. equipment. Compared with other small marking equipment, the ride-on road marking machine is superior. What’s more, the ride-on line marking machine has a larger capacity paint tank and glass bead tank to ensure uninterrupted marking construction over a longer distance.

• 

• 

Henan YG machinery introduced that the tumbling automatic mixing system in the paint tank can ensure that the heated paint in the tank is fully mixed. It also confirms that the paint released from the tank for construction is stable and uniform in composition, which can also improve the Persistence of construction markings. It is more suitable for large-scale projects. The marking amount of one ride-on road line marking machine in one hour can be equal to the amount of 2-3 traditional hand-push road line marking machines working together for a whole day. Moreover, the longer the construction time, the greater the gap between the two.

The ride-on road marking machine can replace the functional system and paint cans and other components according to the needs of customers. It can be used in high-pressure airless spraying, two-component spraying, air-assisted spraying, hot melt spraying, hot melt extrusion, and hot melt. The free combination of marking functions such as scraping and pre-marking can simply realize that one machine can be used for multiple purposes.