At the beginning of the toilet paper processing, you usually choose the ordinary tissue making machine, but as the market gradually opens up, the general equipment can no longer meet the needs of the market. At this time, you can consider a full-automatic toilet paper production line. So which machines are included in the automatic production line for processing toilet paper? Below, YG Machinery will give you a brief introduction.

• 

• 

Everyone who has done toilet paper processing knows that the tissue making machine with a common configuration is fully automatic except for the toilet paper rewinder. Both the paper cutter and the packaging machine require manual operation. Therefore, the common configuration of the machine requires at least three to four labor. The wallboard toilet paper rewinder developed by Henan YG Machinery, the head adopts two-centimeter-thick wallboard, and the entire body is 1.5 cm-thick square steel, and it has a full embossing function, which is stable and efficient. Production capacity makes various operations more convenient and quick and greatly improves production efficiency.

• 

• 

The toilet paper automatic production line is equipped with a small gyro paper cutter. The small gyro machine has a firm structure, beautiful design, accurate paper cutting action, and a smooth cut surface. Compared with the automatic paper cutter, the speed is fast and the stability is strong. Stable 50-70 cutting, and can be used for multiple purposes in one machine, can cut toilet paper rolls, flat rolls of toilet paper, and pumping paper. Nowadays, labor is becoming more and more expensive. If you require efficiency, you might consider connecting the toilet paper rewinder and the small rotary cutter to produce two laborers, which can produce about 2.5-3 tons in eight hours.

• 

• 

If you have stable sales channels and sufficient funds, you can consider the entire production line of the toilet paper rewinder, the small rotary cutter, and the toilet paper roll packaging machine, which can greatly reduce labor and improve the production efficiency of roll paper. After all, toilet paper is processed in volume, with small profits but quick turnover. In the case of stable market sales, the production volume of the machine is directly proportional to the profit!

Nowadays, green living is advocated, both in terms of food and living environment, they pay more attention to green. Then the people living in the city have a lot of cars but not many green vegetation, resulting in insufficient oxygen in the air. Human life needs to breathe, and breathing needs oxygen. This is the basic and necessary condition for survival. People who are sick and hospitalized have oxygen cylinders in the hospital, and even medical oxygen concentrator machines. As people’s lives and materials become more abundant, many people will choose an oxygen concentrator. Many people will think of so many brands, oxygen concentrator machine. Which is better for home use?

• 

• 

What effect can oxygen concentrator machine play on the human body?

1. Eliminate fatigue and improve intelligence

The human brain consumes 20% of the body’s oxygen, and the brain is particularly sensitive to hypoxia. Insufficient oxygen supply will lead to physical exhaustion, affecting people’s intelligence and work efficiency. After oxygen inhalation, the above symptoms can be significantly improved.

2. Improve body immunity

Oxygen inhalation can strengthen human cells, enhance metabolism, and improve body immunity.

3. Oxygen inhalation is helpful for beauty

Oxygen inhalation can enhance the aerobic metabolism of human cells, increase skin nutrition, and reduce wrinkles. Thin skin can reduce melanin deposition and beautify the skin.

4. Long-term oxygen inhalation can resist aging

Oxygen inhalation can significantly increase the partial pressure of oxygen and prevent the occurrence of many senile diseases.

5. It is beneficial to the growth of the fetus

Oxygen inhalation by pregnant women can ensure that the fetus gets enough oxygen, so that the fetus develops better and faster.

• 

• 

Purchase skills of medical oxygen generator:

1. When purchasing a medical oxygen generator, you should choose an oxygen generator with an integrated metal structure and automatic early warning filling of molecular sieve.

2. Patients with respiratory tract and cardiovascular diseases have higher requirements for the performance of oxygen concentrators, and they should choose to meet the standard medical indicators when purchasing.

3. The household oxygen generator is a medical health maintenance device. It is necessary to choose a machine with excellent structural performance, small size, and ideal heat dissipation.

4. Nebulization extension function For users with respiratory diseases, you can choose products with nebulization function.

5. Control the oxygen concentration. The oxygen concentration of high-quality oxygen generators should be stabilized above 90%.

6. The operating noise should be less than 45 decibels. Most of the oxygen machine for home is used by people who need to rest, and it is used for a long time. Excessive operating noise will greatly affect the user’s rest.

7. An oxygen generator that has passed ISO international and CE European quality system certification is an important guarantee for purchase.

The fog cannon dust suppression is divided into a head of 30-120 meters, divided into two specifications of a remote control type and manual type. Mist cannons are suitable for construction site dust removal, factory dust removal, road vehicle dust, large gardens, greening trees, road protection forests, lawns, etc. spray humidification, coal yards, power plants, steel slag yards, iron ore yards, loading, and unloading yards, railways Goods yards, urban roads, prevention of plant diseases and insect pests, can also be applied to the environmental protection industry, dust-prone coal and other material storage yards, etc., spraying water for dust control, dust removal, dust suppression, and cooling. Dust suppression cannon adopts horizontal 360° free rotation and vertical -10°~45° up and down pitch adjustment function, 360° full coverage, no dead angle spray, to ensure that there is no dead angle in the whole process of dust removal. It is sprayed for an average of 8000 hours of trouble-free work, highly intelligent, simple to operate, and easy to maintain. The fog cannon dust suppression can be moved or fixed in one place, so it can be used in a wide range.

• 

• 

Points to note when the fog cannon is connected to power and water sources:

1. The fog cannon machine uses the industrial frequency power supply provided by the generator set (can also be connected to the mains power supply), the rated working voltage of the motor is AC380V, and the output AC voltage of the generator set is 400V, 50Hz.

2. When using three-phase 380V city power, there must be a power switch before connecting to the mist cannons machine electric control box, and there should be a good grounding on the power switch; the power cord should be connected to the equipment electric control box.

3. When connecting the power cord, the power switch on the front of the electric control box should be turned off and in the OFF position. The wiring can only be performed after testing and confirming that there is no electricity.

4. The three-phase five-wire system is adopted. When selecting the power cord, the wire diameter should be determined according to the total power stated in the product technical parameters to ensure that the power cord has sufficient load capacity.

5. When the water source is installed, a special spray valve is set up, and the water inlet of the fog cannon machine and the water outlet of the water tank can be directly connected by a pipeline after the half-work valve.

• 

• 

Main features of fog cannon:

1. Long range, wide coverage, high work efficiency, can achieve precise spray;

2. The sprayed mist particles are small, and when in contact with dust, it forms a moist mist, which can quickly suppress the dust;

3. The supporting power is flexible, and it can be powered by three-phase 380V city electricity or diesel generator set;

4. It can be fixedly installed on a concrete pouring platform, or it can be installed on a transport vehicle with a diesel generator set;

5. Flexible operation, remote control or manual control, horizontal rotation, and spray angle can be adjusted at will, safe and reliable to use;

6. Compared with other dust suppression spraying equipment (spray guns, dust control water truck), the water consumption can be saved by 70% -80%, and the water mist coverage area is much larger than other dust suppression spraying equipment;

7. The range is optional from 60 meters to 200 meters, and it can be configured according to the actual requirements of customers.

Water Sand Blasting Machine

The liquid sandblasting machine (structure: feeding system, circulation system, etc.) uses the grinding liquid pump as the feeding power of the grinding liquid, and the uniformly stirred grinding liquid is delivered to the spray gun through the grinding liquid pump. The wet sandblasting machine is to use the low-temperature freezing effect of liquid nitrogen to embrittle rubber-plastic alloy materials. At this time, the burr is embrittled before the product. In the time difference between the burr embrittlement and the product not yet embrittled, a high-speed jet is used. Molecular particles hit the product burrs to remove high-quality burrs from rubber-plastic alloy products and aluminum and zinc alloy products. As the acceleration power of the grinding liquid, the compressed air enters the spray gun through the air pipe. In the spray gun, the compressed air accelerates the grinding liquid entering the spray gun, and is ejected through the nozzle and sprayed to the processed surface to achieve the expected processing purpose.

• 

• 

Automatic Sandblasting Machine

 The sandblasting machine realizes automatic sandblasting through the electric control system, which can automatically adjust the sandblasting angle, sandblasting time, sandblasting distance, backblowing time, spray gun movement, worktable speed, etc. The sand blasting machine makes use of the low-temperature freezing effect of liquid nitrogen to embrittle rubber-plastic alloy materials. At this time, the burr is embrittled before the product. In the time difference between the burr embrittlement and the product not yet embrittled, a high-speed jet is used. Molecular particles hit the product burrs to remove high-quality burrs from rubber-plastic alloy products and aluminum and zinc alloy products. Make the appearance of the parts more beautiful.

• 

• 

If the wet sand blasting machine is used for better effect, it can also improve the surface hardness and corrosion resistance of parts. Because the working sandblasting head used is directly pressed on the surface of the portable sandblasting machine (structure: feeding system, circulation system, etc.), the pressurized sand is directly hit on the surface of the workpiece and then bounces back. Sand and dust (form: solid particles) ) Will be constrained in the sandblasting working head, and the negative pressure is made by the equipment on the upper side of the inner cavity of the working head to collect sand and dust (form: solid particles). After the work is completed, there will be no sand and dust (form: solid particles) out, and finally no dust (form: solid particles) pollution is realized, the abrasive is automatically recovered, and it can be recycled, reducing production costs.

The PSA nitrogen production system is mainly composed of an air compressor, an air purification system, an air storage tank, a switching valve, an adsorber, and an oxygen buffer tank. After being compressed by an air compressor, the raw material air enters the air storage tank after dust removal, oil removal, and drying, and then enters the left adsorption tower through the left intake valve. At this time, the tower pressure increases, the nitrogen molecules in the compressed air are adsorbed by the zeolite molecular sieve, and the unadsorbed oxygen passes through the adsorption bed and enters the oxygen buffer tank through the outlet valve. This process is called adsorption, and the duration is tens of seconds. After the adsorption process is over, the left adsorption tower and the right adsorption tower are connected through a pressure equalizing valve to balance the pressure of the two towers. This process is called pressure equalization and the duration is about 3 to 5 seconds. After the pressure equalization is over, the compressed air passes through the right intake valve and enters the right adsorption tower, and the above adsorption process is repeated. At the same time, the oxygen adsorbed by the molecular sieve in the left adsorption tower is decompressed and released into the atmosphere through the left exhaust valve. This process is called desorption, and the saturated molecular sieve is adsorbed and regenerated. Similarly, when the left tower is adsorbing, the right tower is also desorbing. After the adsorption of the right tower is completed, the pressure equalization process is also entered, and then the adsorption is switched to the left tower, and the cycle is alternated to continuously produce oxygen.

The above-mentioned basic process steps are all controlled automatically by PLC and an automatic switching valve.

• 

• 

Working principle of Nitrogen Generator

The PSA nitrogen generator is based on the principle of pressure swing adsorption, using high-quality carbon molecular sieve as the adsorbent, and producing nitrogen from the air under a certain pressure. The purified and dried compressed air is subjected to pressure adsorption and decompression desorption in the adsorber. Due to the dynamic effect of air, the diffusion rate of oxygen in the micropores of carbon molecular sieve is much greater than that of nitrogen. Oxygen is preferentially adsorbed by a carbon molecular sieve, and nitrogen is enriched in the gas phase to form finished nitrogen. Then, after decompression to normal pressure, the adsorbent desorbs the adsorbed oxygen and other impurities to realize regeneration. Generally, two adsorption towers A and B are installed in the system. One tower absorbs nitrogen and the other tower desorption and regeneration. The opening and closing of the pneumatic valve are controlled by the control device, so that the two towers are alternately circulated to achieve continuous production of high-quality nitrogen purpose.

• 

• 

Advantages of Pharmaceutical Nitrogen Generator

1. The raw material air is taken from nature, only needs to provide compressed air and power to produce nitrogen. The equipment has low energy consumption and low operating costs.

2. The purity of nitrogen is easy to adjust, and the purity of nitrogen is only affected by the amount of nitrogen exhaust. The purity of ordinary nitrogen can be adjusted arbitrarily between 95% and 99.999%.

3. The nitrogen generator equipment has a high degree of automation, fast gas production, and can realize unmanned operation. Just press a button to start and shut down, and nitrogen can be produced within 15-20 minutes after starting up.

4. The nitrogen air compressor process is simple, the equipment structure is small, and the floor space is small. The equipment has strong adaptability.

5. PSA nitrogen generator equipment can be operated for 24 hours without special supervision. The output of high-purity nitrogen is purer and more stable than the liquid nitrogen and cylinder nitrogen on the market.

The wet wipe making machine is a kind of spun lace non-woven fabric made of natural pure plant fiber as raw material, which manufactures disposable clean dry towels and folding square cold and hot wet wipes, and realizes the instant and rapid conversion of the light collecting machine in the meantime. An integrated high-tech green and environmentally friendly smart electrical appliances. It can produce all kinds of dry towels and folded square cold and hot wet towels in a short period of time, and it is sterilized by ultraviolet rays, so it is really convenient and fast to use, clean and hygienic.

• 

• 

Wet wipe machine product performance and characteristics advantages:

wet tissue making machine adopts original single-servo or double-servo motor control, which is more intelligent than other similar frequency conversion motors or inverter-controlled products, with higher packaging accuracy, wider adjustable range, more precise control, lower rejection rate, and stability Better sex. Thanks to the world’s leading fully open box structure, the transmission structure is clear at a glance, and maintenance is more convenient; dual frequency conversion control, bag length is set and cut, no need to adjust empty travel, one step in place, saving time and film.

Imported electrical appliances, touch-type man-machine interface, convenient parameter setting, and fault self-diagnosis function, fault display is clear at a glance. High-sensitivity photoelectric eye color mark tracking makes the sealing and cutting position more accurate. Independent PID control of temperature, better suitable for coating of various materials. Positioned stop function, no sticking to the knife, no waste of film. The rotating system is simple, the work is more reliable, and the maintenance is more convenient. All control is realized by software, which is convenient for function adjustment and technical upgrade and never lags behind. The wet wipe machine has a compact structure, simple operation, and stable performance.

• 

• 

YG Wet Wipes Production Line for Sale

YG Machinery specializing in the manufacturing of high-speed wet wipes production line. As a professional wet wipes machine manufacturers, we have different types of wet wipes manufacturing machines for your choice. For example, a fully automatic single-channel wet tissue manufacturing machine. Fully automatic double channels wet wipe production line. If you are looking for wet wipes production line for sale, please feel free to contact us.

According to the packing method, we have 1-2 pcs/pack automatic single or double sheet wet wipes production machine. 5-30 pcs/pack semi-auto wet tissue folding machine. 30-120 pcs/pack high-speed wet wipes production machine (Auto-splicing). Which wet wipes production line do you need? Let’s talk about the 30-120 pcs/pack High-Speed Wet Wipes Folding Machine in detail in this page. Or you can view this page to learn more about YG wet wipes making machine other information.

Henan YG Machinery produces disinfection doors, atomization disinfection doors, antibacterial disinfection doors, antibacterial atomization doors, intelligent disinfection doors, intelligent atomization disinfection doors. , Segmented 720-degree all-round sterilization and anti-virus technology, humanized design from head, face, waist, and feet, reasonable layout, and avoid respiratory discomfort. The disinfection solution adopts food grade, which can perform non-contact disinfection on passing personnel and objects. At the same time, the body temperature of the personnel can be detected by adding a human body temperature alarm and a thermal imaging body temperature detector. which are suitable for schools, prisons, shopping malls, office areas, storefronts, doorways and other places.

• 

• 

Features of disinfection gateway

Intelligent disinfection. The factory direct sale mobile disinfection equipment adopts the manual-automatic integrated control mode. Human disinfection gate can be intelligently disinfected by connecting with an infrared sensor. The high quality disinfection gateway can distinguish the direction of entry and exit of personnel. So as to ensure that every person must be disinfected and not miss every entry person. While saving costs, it increases the operating life of the disinfection gateway equipment. In addition, we have cheap automatic door handle sanitizer equipment for sale.

• 

• 

Large spray volume. The YG manufactured disinfection gateway has a large spray volume and can generate a large amount of disinfection mist in a short time. Disinfection door sprayer can diffuse to every corner of the disinfection room in a short time to meet the disinfection needs of large areas and short time.

Fine mist particles. The full-body disinfection booths channel use the principle of ultrasonic atomization. Therefore, the disinfection mist manufactured by the equipment can reach the micron level. The disinfected object is completely wrapped by the droplets. Make the disinfection of passers-by more comfortable. 360°all-round disinfection without dead corner.

Easy operation. The simple disinfection doorway equipment is easy to operate. Disinfection door can be operated without training to understand the principle of the equipment. There is no technical threshold requirement. After adding the concentrate for disinfection, sterilization, and deodorization once, it is unnecessary to take care of it for half a month or one month. YG cheap disinfection door will automatically spray disinfection. Moreover, YG has factory price self-sanitizing door handle products.

Pile cutting machine is a new type of pile-breaking operation equipment, which uses hydraulic principles to controllably split objects. Highly modular combination is adopted, and the modules are connected by pin shafts, and the pile heads within a certain range of diameter can be cut off by combining different numbers of modules. Pile cutting machine is a kind of engineering machinery suitable for fast cutting off pile heads in pile foundation engineering. It is suitable for the removal of pile heads of various pile foundation forms, which is many times faster than manual. Through the combination of different numbers of modules, the pile heads of different diameters can be cut. The cost performance is high, the operating cost is low, the cost performance is close to that of foreign products, the pile cutting operation is simple, and no skills are required.

• 

• 

The hydraulic pile breaker greatly reduces the labor intensity of workers and improves work efficiency. Combined with the concrete pile breaker demolition method, it takes only a few minutes to cut off a pile head. The power source provides pressure to multiple oil cylinders of the pile cutter, and the oil cylinders directly drive the drill rod and simultaneously squeeze the pile body to cut off the pile head. During the construction of the pile breaking machine, the operation is simple, low noise, low cost, and suitable for pile group construction projects.

The hydraulic pile breaker is mainly composed of a power source and a working device. The pile breaker machine provides pressure to multiple cylinders of the pile breaker through the power source. The cylinders directly drive the drill rod and simultaneously squeeze the pile body to cut off the pile head. The working device is composed of multiple hydraulic cylinders of the same model combined into pile breakers with different diameters, meeting the requirements of pile breaking heads of various diameters. The piston of this cylinder is made of alloy steel and can meet the requirements of various markings. The crushing requirements of concrete.

• 

• 

Advantages of YG Machinery hydraulic pile breaker:

1. Our pile cutter machine is equipped with hydraulic pile breaking, with high efficiency and low noise.

2. Adopting modularized propulsion, suitable for piles of different sizes, and the product has high practicability.

3. The operating cost of the machine is lower than other similar products, saving money for users and reducing the company’s operating costs.

4. Our company’s pile cutter has a simple structure, small size, light weight, convenient operation, no need for special skills training, quick start-up, and high work safety.

5. This pile breaker can be used in conjunction with various construction machinery to truly realize the dual performance of product versatility and economy.

6. The product has been upgraded with humanity, low noise, no vibration, no impact during work, good working environment, and improve the efficiency of man-machine work.

The principle of PSA oxygen generator is similar to PSA nitrogen production, except that the adsorbent is to adsorb nitrogen. At present, the pressure swing adsorption method uses zeolite molecular sieve or lithium molecular sieve adsorbents with a relatively large separation coefficient for oxygen and nitrogen components to prepare oxygen-enriched oxygen. Under pressure conditions, nitrogen is the adsorbed component on the molecular sieve, only a small amount of oxygen is absorbed, and the unadsorbed oxygen is output as product gas. When the adsorbent reaches saturation, the nitrogen gas is desorbed by the decompression process, and the adsorbent is regenerated. The use of two adsorption beds for cyclic operation can achieve the purpose of continuous production of oxygen.

• 

• 

In terms of industrial oxygen production, for small and medium-sized oxygen production needs, there is also pressure swing adsorption oxygen production, including PSA oxygen production and VPSA oxygen production processes. The working principle of Industrial Oxygen Generator is to use high-efficiency nitrogen and oxygen separation adsorbent to adsorb nitrogen and adsorb Desorption and regeneration are carried out for a certain period of time, and two or more adsorption towers are connected in parallel to achieve the goal of continuous oxygen production.

• 

• 

Technical features of the large Industrial Oxygen Gas Generator:

1. Mature and advanced technology introduction process design.

2. Low energy consumption, 20~30% lower than similar devices.

3. The original molecular sieve adsorbent imported from Germany is used for oxygen production, and the adsorption yield and oxygen recovery rate are high.

4. PSA Oxygen Generator uses unique airflow distribution design technology to ensure that the molecular sieve is not powdered, and the molecular sieve can be used for more than 10 years.

5. All pneumatic control valves are imported, safe and reliable, with good sealing performance and long service life.

• 

• 

6. The main control equipment is selected from international brands, with fully automatic control and complete safety protection functions.

7. The operation is simple, no need to be equipped with specialized operators.

8. The operating mode of industrial oxygen generator runs automatically. In the case of multi-machine operation, it can be controlled by the upper computer and switch automatically.

9. Stable operation, high reliability, low maintenance and maintenance costs, compact structure, and floor space.

• 

• 

The scope of application of Industrial Oxygen Generator

The oxygen produced by the PSA oxygen generator can be used as a source of ozone in environmental protection, improving the efficiency of ozone production, and achieving high-efficiency environmental protection purposes; oxygen can be burned with oxygen-rich, improving combustion efficiency, and used in metal smelting and glass production; oxygen can also be used as Chemical components participate in chemical reactions, such as the production of sodium hydroxide. Oxygen can also be used in aquaculture to ensure the survival of fish.

Henan YG Machinery Co., Ltd. has developed and developed the advantages of similar products at home and abroad for many years and is the first domestic production line for fully automatic plastic film disposable gloves. In the production process, the finished product and the waste can be separated easily and manually. One machine only needs one person to operate, and the speed can reach more than 150 per minute. It has the advantages of long continuous working time, high output, and low labor. The plastic glove making machine can also be equipped with film finger cots and various special-shaped plastic products according to customer needs. The PE glove machine is controlled by a microcomputer touch screen, a three-phase hybrid motor drags the material, and the automatic counting can set the number of sheets arbitrarily. Various shapes of knife molds can be customized, easy to load and unload.

• 

• 

The purpose of the products produced by the glove making machine:

The disposable glove making machine can be modified to produce plastic gloves, medical finger cots, and other related medical and health products. This product is commonly used in major hotels, guesthouses, medical and health, family life, paint protection, beauty salons, garden work, cleaning work, etc. This machine is suitable for high-density polyethylene (HDPE), low-density polyethylene (LDPE) plastic films Sealing and cutting into gloves is an ideal machine for gloves used in fast food restaurants such as KFC.

• 

• 

The difference between PVC and PE gloves:

The characteristics of disposable PVC gloves: gloves do not contain allergens; low dust generation, low ion content; strong chemical resistance, resistance to a certain pH; strong tensile strength, puncture resistance, not easy to break; Good flexibility and touch, convenient and comfortable to wear; anti-static performance, can be used in a dust-free environment.

The characteristics of disposable PE gloves: high transparency; loose opening of the gloves, convenient and comfortable to wear; uneven or flat surface, bright color, uniform thickness; light weight, good hand feeling, low price, non-toxic and harmless, it is a general economical protection product.

• 

The PE gloves produced by the PE glove making machine are widely used in life. At this stage, the main products are medical disposable PE gloves. Because of its convenience, it has also entered the daily life of the people. The simplicity, price advantage, and environmental protection of PE gloves have played an important role in people’s lives and work. In the future, the development of disposable PE gloves will go to more areas. So investing in PE glove making machines will definitely get unexpected benefits. Of course, our company also has a nitrile glove production line and latex glove production line to choose from. If you have any needs, you can contact us and we will answer you in time.