The core drilling rig adopts hydraulic drive, modularity, safe and reliable structure, easy to operate, reduces labor intensity, and is more user-friendly; all use 12 volt DC power supply, which is safer to use; when the machine is moved, it is easy to disassemble and install. Easily complete the movement of the drilling rig. Core drilling rig can help customers greatly save the investment in building temporary roads, shorten the exploration period, save labor, and reduce handling risks and costs.

The core drilling machine is a deep hole drilling equipment for geological prospecting, hydrological water wells, coalfield geological exploration, oil and natural gas exploration and development, and other fields. This core drilling machine combines the advantages of vertical hydraulic drilling rigs, which can be used for small-diameter diamond drilling, large-diameter drilling, vertical drilling, and inclined drilling. It is ideal equipment for deep-hole geological exploration drilling. 

• 

• 

Classification of a core drilling machine:

HZ series hydraulic core drilling rigs, aluminum alloy core drilling rigs, walking (trailer) drilling rigs, vehicle-mounted core drilling rigs, crawler core drilling rigs

Walking type (trailer type) core drilling machine

1. The drilling rig is equipped with a wheeled walking mechanism and hydraulic cylinder support, which is convenient for relocation and level adjustment of the drilling rig.

2. With hydraulic feed mechanism to improve drilling efficiency

3. The drilling rig is equipped with an upper ball clamping mechanism instead of a chuck, which can implement non-stop bar reversal, high work efficiency, convenient operation, safe and reliable

4. Equipped with a pressure gauge at the bottom of the hole to indicate the pressure, easy to grasp the situation in the hole

5. The lifting and lowering towers are operated hydraulically, which is convenient and reliable

6. The diesel engine is started by electricity to reduce the labor intensity of workers.

• 

• 

Vehicle-mounted core drilling rig

The vehicle-mounted core drilling rig is a multifunctional hydraulic vehicle-mounted vertical-axis rotary drilling rig. It is suitable for: geological survey and exploration, road and high-rise building foundation exploration, as well as various concrete structure inspection holes, river embankments, subgrade grouting hole drilling, and direct grouting, and civil use of Central air-conditioning for wells and ground temperature.

• 

• 

1. The core drilling rig transmission system, hoisting, mud pump, and other important accessories are installed on this chassis, the layout is reasonable and compact, and the operation is simple.

3. Equipped with BW-160 mud pump, with high pressure and large flow, ensuring the drilling depth and bore diameter

4. The drilling rig is equipped with a mobile device, which can realize the front and back movement of the drilling rig itself, which is convenient for wellhead operation

5. The hydraulic lifting and lowering automatic telescopic drilling tower of the drilling rig tower is safe and convenient to operate.

Crawler core drilling machine

1. The drilling rig adopts an automatic telescopic drilling tower, supported by two high-strength oil cylinders, and a set of hydraulic valves control the drilling tower lying on its back, saving time and effort, safe and reliable, and creating maximum benefits for users.

2. The chassis adopts a rubber crawler, which is lighter in weight and lowers in life cycle cost. It can reduce the noise of the vehicle’s running mechanism, reduce the vibration of the vehicle body, and greatly reduce fuel consumption. It can walk on urban roads without hurting the road surface.

3. The chassis comes with four high-strength threaded legs (or hydraulic high legs) for quick and convenient installation and adjustment. They can be used for leveling the working plane. The loading and unloading truck can reduce the cost of hoisting and improve efficiency. It can be used as auxiliary support during work.

• 

• 

4. The 48V electric start diesel engine greatly reduces the labor intensity of the operator, especially when it is difficult to start the diesel engine in the cold season, it shows great advantages.

5. The core drilling machine is equipped with a BW-160 independent mud pump, which has a large flow and pressure and is convenient for maintenance. Parts and accessories are easy to purchase all over the country.

6. Optional hydraulic pipe screwing machine can be installed to improve work efficiency and reduce labor costs.

YG Machinery is a construction machinery manufacturer, such as water well drilling rigs, small water well drilling rigs, down the hole drilling, rotary drilling rig, anchor drilling machine, rotary drilling machine, and so on. Just leave your requirement, we will reply to you within 12 hours.

The thermoplastic road marking machine is a machine with a high degree of automation. The construction requires a set of several equipment to complete the construction functions of each link from the melting to the marking. It generally consists of a hot-melt kettle, a marking machine, a pre-marking machine, and a primer machine. According to the different marking methods, the thermoplastic road marking machine can be divided into three types: hot-melt squeegee type, hot-melt extrusion type and hot-melt spray type. Marking equipment and marking paint produced by YG Machinery.

• 

• 

Road line marking machine, a road line construction machine that is widely used in roads, high-grade highways, parking lots, squares and runways to draw different restrictions, guidelines and warnings on flat ground. Road marking equipment has played a huge role in urban planning and highway construction with its advantages of speed, efficiency, accuracy, etc., saving the construction period and economic investment of road construction to a degree.

The road line marking machine has various structures, which may differ in structure due to different production design conditions or application to different construction objects and different materials. A line marking machine generally has an engine, an air compressor, a paint (melt) bucket, a marking bucket, a guide rod, a controller and other devices, and various power-assisted drive carriers are configured according to needs.

• 

• 

Engine: Most road marking machines use engines as power, and some use batteries as power. The engine performance is stable and spare parts can be easily purchased. It almost determines the operating performance of the entire equipment; if a battery is used as power, the operating time per charge must be considered, not less than 7 hours (approximately 1 day of working time) ).

Air compressor: For line marking machines that rely on air for spraying (not hydraulic spraying), it is also the main component that affects the performance of the whole machine. As with engines, you should consider buying products equipped with air compressors of internationally renowned brands. The larger the emission, the better, but there must be a certain limit.

Tank: There are two main functions: one is to hold paint. In this sense, the size of its capacity will affect the number of fillings and the progress of the operation. Another feature that many users overlook is that the vessel is still a pressure vessel. It is pressurized by an air compressor and becomes a pressurized “air tank” that becomes the driving force for the marking work. One is to use the “spray line” “Box” for spraying is relatively cheap, especially suitable for sports field lawns and general parking lot construction; the other is for spraying.

• 

• 

The operation process of the thermoplastic road marking machine: 1. Install the gas pipeline. 2. Open the lid and add hot melt paint. 3. Open the gas valve. 4. Turn on the barrel fire switch and turn on the bottom of the fuel barrel to heat the stove. 5. Close the cover of the barrel and stir after heating for a period of time. 6. Open the rear fire road valve and use some points to ignite the rear fire road. 7. Construction can be carried out after the paint in the barrel is melted.

Cement sprayer machine is suitable for reinforcement, leveling, painting and pumping. It can be used for ordinary mortar plastering of internal and external walls, smoothing plaster, thermal insulation mortar, bonding mortar, lime painting, repairing painting, face ash, bonding ceramic tiles and filling mortar. This mortar spraying machine is equipped with a screw pump. You can use both ready-mixed and pre-mixed mortars at the same time. By changing the spray gun and screw pump, you can adjust the air volume to use most ordinary mortars and special mortars to achieve multiple functions in one machine, and use different materials with different mixers to achieve the integration of mixing and spraying. The cement plaster spray machine is characterized by no pulse, high pressure, large flow, high efficiency, convenient and safe operation, and the equipment is compact in structure, easy to move, easy to maintain, long service life, and easy to clean.

• 

• 

Cement sprayer machine operation guide

1. Before starting each shift, press the hand oil pump several times to inject oil into the transmission part.

2. After turning on the power, first electric the main motor to check whether the rubber screw rotation direction is consistent. If not, the power phase wire must be changed (this check must be performed every time the power is reconnected).

3. Connect the delivery hose and nozzle, add 5L of clear water to the hopper, start the motor to pump the clear water out, moisten the hopper, pump body and delivery hose, and stop after pumping out most of the water.

4. Add putty or paint into the hopper to start spraying (should start the air compressor and open the air valve).

• 

• 

5. It is strictly forbidden to run idling when there is no material or water in the hopper.

6. After the work is finished, drain the remaining material in the hopper, and pour enough clean water into the hopper, clean the hopper, and start the pump, clean the hose and nozzle, until the pump is all clean water, so as to avoid the remaining material in the hose. Solidification, blocking the hose and nozzle.

7. If the shutdown time is too long, wipe the cement sprayer machine clean and remove the booster screw. After applying oil, keep it in a safe place and reinstall it when using it.

8. When the pumping pressure is insufficient during work, the booster stator bolt can be adjusted or the booster rubber sleeve and the booster worm can be replaced.

9. Before spraying, the sprayed area should be infiltrated with water; when spraying, the nozzle should be as vertical as possible to the sprayed surface (the distance can be adjusted according to the spraying effect) layered and evenly sprayed, and coordinated with the flattening process. If the wall is too dry or the time after spraying is too long, it will seriously affect the flattening effect, and the process must be changed.

• 

• 

10. Fill the hopper evenly without interruption. When the conveying screw rotates, it is strictly forbidden to stir in the hopper with a stick to prevent injury.

11. Once the shotcrete delivery pipe is blocked, switch the switch to the manual position, only turn on the compressor, remove the quick connector in front of the pump head, and then block the nozzle downwards, and the wind pressure will generate reverse pressure, and the delivery pipe will be left with slurry. Blow out, install the quick connector, and start to work normally.

12. When operating the cement plaster spray machine, you should wear safety helmets, protective glasses, protective clothing and other protective equipment.

13. The pressurized rubber sleeve and the pressurized screw are vulnerable parts. In order to extend the service life, the pressurized stator bolts are in a loose state during the first use. When the pressure is reduced and the flow is significantly reduced, adjust the press bolts to make them In normal working condition.

Hydraulic rock splitter uses hydraulic oil as energy source and cleverly applies the principle of oblique bond, so that the splitting head force can reach hundreds of tons, and even thousands of tons can be used in combination, so that thousands of tons of boulders can be removed in a few seconds. It splits easily and separates the hard and huge rock from the mountain. When it is prohibited to use or cannot be used at all, the rock splitter machine is an economical, efficient and practical non-blasting construction machine. It also has the characteristics of small size, light weight, convenient operation, safety and reliability, flexible use, high work efficiency, no vibration, no impact, no noise, no dust, direction controllable, economical and practical, etc. It is currently in quarrying It is widely used in the mining industry and infrastructure construction, especially in urban construction, river dredging, disaster relief, and removal of obstacles. It is a machine that is not indispensable. The hydraulic rock splitter is a kind of machine that can completely replace secondary and manual work. Ideal equipment for disintegration.

• 

• 

Rock splitting machine has the characteristics of small size, light weight, convenient operation, safety and reliability, flexible use, high work efficiency, no vibration, no impact, no noise, no dust, controllable splitting direction, economical and practical, etc. at present. Splitting equipment has been widely used in quarrying, minerals and other mining industries and infrastructure construction, especially in urban construction, river dredging, disaster relief, and removal of obstacles. It is an indispensable machine. If the rock is too hard to be hammered, you can consider using a static rock splitting machine. Rock splitting equipment is a hydraulic rock splitting equipment. It is a high-efficiency tool that can replace explosives and blast mining to achieve mechanized large-scale rock-breaking. Composed of a high-pressure pumping station and six splitting rods, the pressure is 160MPA, and the combined splitting force can reach several thousand tons. It needs to be drilled in advance (the hole diameter is 110-150mm, the depth is 0.9m), and then the splitting rod is put in for 3 minutes The splitting can be completed, the splitting depth can reach 1-3 meters, and the width can reach 8-15 meters, which can split a large area of ​​rock.

• 

• 

The structure of rock splitter: mainly consists of hydraulic station, oil pipeline, split gun, chip, etc. According to the type of power station, it can be divided into two types: electric type and diesel type. According to the material of the split gun, it can be divided into two types: steel split gun and aluminum alloy split gun. It can also be classified according to the power of the split gun. The rock splitter machine has a series of advantages such as simple structure, convenient operation, high working efficiency, low cost, safety, energy saving, and energy saving management.

The water well drilling machine is a drilling equipment widely used in water conservancy construction and farmland engineering geothermal drilling. No matter what equipment it is, it needs to be maintained and maintained to better improve work efficiency and extend its service life. What are the common faults of water well drilling rigs? How to do maintenance and maintenance work to reduce the failure rate of drilling rigs?

• 

• 

Common faults and troubleshooting methods for water well drilling machine

Fault one

After the water well drilling machine is started, the oil pump is not oiled or the amount of oil is insufficient. First, check whether the amount of oil in the oil tank is insufficient or no oil. If the fault of the oil level line is still not eliminated, check whether the filter is blocked. In addition, Check whether the air vent of the fuel tank is blocked, or the suction pipe joint is loose for air intake, etc.;

Fault two

The oil pump of water well drilling equipment is heated and worn, and the oil pump must be repaired and replaced. If the viscosity of the oil is too high or too low, use the oil strictly according to the instructions; at the same time, check the transmission device of the oil pump of the water well drilling equipment to improve the assembly accuracy;

Fault three

The coupling of water drilling rig heats up, and the elastic ring is excessively worn; the reason is that the coaxiality of the power machine of the drilling rig is poor when the clutch is assembled.

• 

• 

Fault four

The brake of the hoist of the drilling rig is slipping. The main reason is that there is oil on the inner surface of the brake belt, and the inner surface of the brake needs to be cleaned; if there is no oil in the brake of the drilling rig, check the gap between the brake belt and the brake wheel. If it is too loose, properly tighten it;

Fault five

Water well drilling equipment The hydraulic oil is hot, the oil in the oil tank is too little or the oil pump is damaged, it is necessary to refuel or repair the oil pump; choose the working pump reasonably and recommend the working pressure according to the manual.

• 

• 

Maintenance and maintenance methods of water well drilling machine

1. Pay attention to the sound of the impactor and the operation of the gearbox during work. If abnormal sounds and phenomena are found, the machine should be shut down immediately and inspected in time;

2. At any time, check the water and gas pipelines and whether the bolts and nuts of the accessories of the drilling rig are firm;

3. When the working face is immersed in water, a large-diameter drill bit should be used to make the hole. Insert the drill pipe to make the drill pipe 1-2 meters above the water surface to prevent mud and slag from falling into the hole;

4. When the water drilling rig stops working in a short period of time, a small amount of air pressure should be given to prevent sediment from invading the inside of the drilling rig impactor. If the drilling rig is stopped for a long time, the impactor should be lifted 1-2 meters away from the bottom of the hole. fixed;

5. Water well drilling rigs are not allowed to reverse in order to prevent the drill rod from falling into the hole;

6. When adding a new drill pipe, pay attention to keeping the inside of the drill hole clean to avoid mud and sand from mixing into the drill rig impactor and damaging the rig parts;

• 

• 

7. At the end of each work shift, the dirt on the surface of the water well drilling machine must be cleaned up in time. Except for normal handling, it is strictly forbidden to dismantle and unload it on the working surface;

8. The tension of the track shoe should be checked frequently. It should not be too loose or too tight (± 8). When the track shoe is not used for a long time, the track shoe should be in a relaxed state.

9. Water well drilling rigs shall be lubricated with butter for joints and reducers.

10. All connecting bolts, screws and nuts on the car body should be inspected in detail before and after each shift, and the loose parts should be strengthened in a targeted manner;

11. In case of rain and snow, the water well drilling machine should be treated with water and moisture in time; if it is not used for a long time, it should be stored in the inventory and do a good job of preventing moisture, oxidation, fire, and corrosion.

The multifunctional cement sprayer machine is suitable for reinforcement, leveling, painting and pumping. It can be used for plastering internal and external walls with ordinary mortar, plastering plaster, thermal insulation mortar, bonding mortar, lime plastering, repairing plastering, surface ashing, bonding tiles and filling mortar. . This model is equipped with a screw pump specially developed for the Chinese market. You can use both ready-mixed and pre-mixed mortars at the same time. By changing the spray gun and screw pump, you can adjust the air volume to use most ordinary mortars and special mortars to achieve multiple functions in one machine, and use different materials with different mixers to achieve the integration of mixing and spraying.

The multifunctional mortar spraying machine is a high-pressure mortar spraying machine with advanced technology. It integrates advanced technologies at home and abroad, and researches and updates on its basis. It is a new type of multifunctional spraying equipment that can be used for mortar spraying, plastering, and Putty spraying, cement spraying, exterior wall insulation materials and refractory materials and other building surface large-area spraying, geotechnical engineering large-area spraying, etc. The mortar spraying machine is characterized by no pulse, high pressure, large flow, high efficiency, convenient operation, and safety. Moreover, this equipment has compact structure, convenient movement, easy maintenance, long service life, and easy cleaning.

• 

• 

Cement plaster spray machine operation steps and requirements

1. Before starting each shift, press the hand oil pump several times to inject oil into the transmission part.

2. After turning on the power, start the main motor first, and check whether the rotation direction of the rubber conveying screw is consistent with the direction indicated by the arrow. If it is inconsistent, change the power phase line. Note that this check must be performed every time the power is turned on again.

• 

• 

3. Connect the delivery hose and nozzle. Add 5 liters of clean water to the hopper, start the motor to pump the clean water out to moisten the hopper, pump body and delivery hose. After most of the clean water is pumped out, the machine can be shut down.

4. Add mortar (or paint) in proportion to the hopper, start the air compressor and air valve, and start spraying.

5. After the work is completed, immediately drain the remaining material in the hopper, and pour enough clean water into the hopper to thoroughly clean the hopper, and then start the machine and pump the water out to clean the hose and nozzles until the pump is all clean water , The cleaning is over. In order to prevent the remaining material from condensing in the hopper, hose and nozzle, blocking the hose and nozzle, affecting the service life of the equipment.

• 

• 

The cement plaster spray machine is equipped with a large-capacity hopper and uses a strong and stable intelligent hydraulic system to control the mechanical unloading. Regarding the feeding of the mortar spraying machine, the unloading speed and unloading continuity are the same as those of manual feeding, which are often affected by human functions. The impact of this is relatively qualitatively improved. Thereby reducing the idling rate of the mortar spraying machine and improving the efficiency of the spraying machine. Under the test conditions, the efficiency of the cement sprayer machine is about 30% higher than that of the manual spraying.

A large amount of dust and suspended pollutants such as dust will be generated in the construction site during the construction process, which will seriously affect the surrounding air quality. Under the general trend of environmental protection, fog cannon machine has become an indispensable dust suppression equipment for dust control on construction sites. So, what kind of fog cannon machine should be chosen for construction sites? Here, I recommend an easy-to-use and inexpensive mist cannons—–dust-reducing fog cannon.

• 

• 

The dust suppression cannon has a long range, a large area covered by water mist, and can achieve timing and precise spraying. The sprayed droplets have a small diameter and are very easy to combine with dust, which can achieve rapid dust reduction on the construction site. It can be fixed on a concrete platform or installed on a mobile transport vehicle to achieve various dust removal effects such as directional dust removal and mobile dust removal. It is simple to operate and easy to use, and the horizontal angle of the spray can be adjusted according to actual needs, so that the spray coverage is wider. When dust suppression cannon sprays, it has low water consumption, large spraying area and significant dust suppression effect.

• 

• 

Application fields of dust removal fog gun machine:

Fog cannon dust suppression vehicle is a kind of dust suppression equipment, its function is to suppress dust and reduce dust. In addition to dust reduction, it has other functions. Dust management: open-air material storage yard, coal logistics park, open-pit mine mining, open-air dust, closed unloading Dust pollution control in material areas, truck unloading ports, unloading unloading dust, large-scale loading truck working dust, coastal port shipments, transshipment of coal, ore, bulk powder handling, etc.; moisturizing and cooling: airports, highways, stations, terminals, public Large-scale dust reduction, moisturizing, cooling and disinfection of places, sports venues, and hot venues; spraying diseases: landfills, sanitation and epidemic prevention, urban landscaping, and large-scale sterilization, disinfection, deodorization, and disease prevention after natural disasters.

• 

• 

fog cannon dust suppression manufacturer

Fog cannon with strong wind and high range (far) can effectively suppress dust and reduce dust. The difference of YG Machinery’s fog cannon dust suppression is that the spray particle size is only 4 microns and the larger is 150 microns, which can be dust and dust. At the same time, dust particles can flow. Price of City Dust Suppression Vehicle The dust suppression vehicle produced by our company has excellent performance, high-pressure water mist to reduce dust, high efficiency, energy saving, and water saving. The spray radius is 30 meters, 40 meters, 50 meters, 60 meters, 70 meters, 80 meters, 100 meters. , 120 meters, 150 meters and other different specifications. Our company is willing to serve you wholeheartedly, and look forward to your visit to our factory to inspect the production strength and product technology, provide you with high-quality service, no middlemen, refuse price difference, price in one step, quality assurance, one-to-one tracking after-sales!

Gloves play an indelible role in many different industries and lives. YG is a manufacturer of glove production lines with various types of glove making machines. According to the material, it is mainly divided into: latex glove machine, nitrile glove machine, PE glove machine, and labor insurance glove machine. According to the performance of the machine, it can be divided into automatic glove making machine, computer glove making machine and so on. If you want to invest in glove making machine, you can contact us, we will provide you with high quality and competitive price machinery.

• 

• 

nitrile gloves making machine

Nitrile gloves are mainly used in industries: chemical, pharmaceutical, maintenance, automotive and transportation, metal processing, construction and engineering, and property services.

Protection features: These gloves are designed to protect products and workers in environments with special management requirements. These gloves have characteristics that are compatible with various uses, including medical laboratories, clean rooms, electronics, food processing, and food service.

• 

• 

Latex gloves making machine

Latex gloves are mainly used in industries: automotive and transportation, metal processing, glass, machinery and equipment, construction and engineering, logistics and warehousing, electronics 

 Protective features: These gloves are designed to prevent cutting, abrasion and puncture, and provide gripping properties for handling materials in dry or humid environments. These gloves also have different degrees of liquid permeability and various special properties, and at the same time have both dexterity and comfort.

• 

• 

PE (plastic) glove making machine

PE gloves, also known as disposable plastic gloves, are more widely used. They are often used in household cleaning, laboratory testing, mechanical gardening, food, sanitation and industrial and agricultural protection, hair dyeing, care washing, dining and so on. Almost all the disposable transparent gloves seen in daily life are PE gloves. It is an ideal machine for gloves used in fast food restaurants.

Protection features: These gloves are designed to protect products for food use or the processing industry.

• 

• 

Features of latex glove production line

1. Our factory is designed according to the chemical properties of the raw materials and the technological requirements of the glove forming process. The equipment process is compact and the mechanical structure is more reasonable.

2. In order to make the machine achieve the best effect under the minimum power, our drying box adopts the tunnel drying method, adopts the principle of hot air rising, and recovers the hot air to achieve cyclic mixing.

3. Choose a special high-temperature resistant chain to speed up production and increase production value.

4. Utilize the principle of hot air circulation in the heating space to reduce the cost; the multi-stage PID temperature intelligent control system, the temperature error does not exceed ±5℃, and the heated uniform gloss is good.

5. Active vibrating glue and uniform glue system make the product gloves have good regularity and thickness uniformity.

6. In view of the shortcomings that the ceramic mold is fragile when vibrated, the transportation mechanism of the latex glove machine chooses a special guide rail to be stable, reliable, and not jammed, and to meet the stability requirements of the transportation equipment during operation.

7. High output value, universal joint design, simple operation of changing molds, speed up the cycle speed.

After the water well drilling machine leaves the factory, it is generally stipulated that there is a running-in period of about 60 hours (some called the running-in period), which is stipulated according to the technical characteristics of the water well drilling rigs at the initial stage of use. Water well drilling rigs are overloaded for a long time during the running-in period, leading to frequent early failures of the machine. This not only affects the normal use of the machine, shortens the service life of the machine, but also affects the progress of the project due to the damage of the machine, and the final gain is more than the loss . Therefore, the use and maintenance of water well drilling equipment during the running-in period should be given full attention.

• 

• 

The drill bit plays a pivotal role in the drilling process of water well drilling equipment. The quality of a drill bit directly affects the efficiency and hole quality of water well drilling rigs, so we need to pay attention to the selection and use of the drill bit. During the drilling process, the operator should pay attention to the drilling usage of the drill bit to make the drill bit better for production operations. Several aspects that need to be paid attention to in water well drilling rigs:

• 

• 

 1. After the drill bit of the water well drilling machine is drilled into the structure, the center drilling tool needs to be replaced in time. First, the bottom of the hole needs to be cleaned, and then the residue at the bottom of the hole is blown clean. After the drill stops rotating, put it in the water well drilling rig. The drill tool is slowly lifted upwards. It is most suitable when the lifting force is just enough to lift the drill tool.　　

   2. The drill bit of portable water well drilling rigs is summarized in the drilling process. It is also necessary to pay careful attention to observe the follow-up situation of the casing, to understand the specific situation in the hole in time, and to keep the hole clean when necessary. The drill bit must not be pulled out forcefully during the drilling process.　　

• 

• 

   3. The bottom of the water drilling rig sometimes has a lot of residual slag. The rotating part of the eccentric drill bit will be blocked by the slag, which will affect its gathering production. At this time, it is necessary to deliver compressed air and re-execute the inside of the hole. Clean and make the down-the-hole hammer work for a short period of time, and then resume the lifting operation of the center drill.

The pipe rust removal machine is a combination of rust removal machine that cleans the inner and outer walls of steel pipes. The outer surface of the steel pipe is cleaned by shot blasting, and the inner surface is cleaned by shot blasting, so that the oxide scale on the surface is removed. Steel pipe derusting machine mainly uses the high-speed pill stream thrown by the high-efficiency and powerful shot blasting machine to blast the surface and inner cavity of the rotating workpiece in the chamber to remove other sticky sand, rust layer, welding slag, oxide scale and sundries. , So that it can get a fine smooth surface. It improves the adhesion of the paint film to the surface of the steel, improves the fatigue strength and corrosion resistance of the steel, improves the internal quality of the steel, and prolongs its service life.

• 

• 

Use scope of pipe rust removal machine:

1. It can carry out high-quality rust removal operations on the surface of square materials such as copper, iron, aluminum, stainless steel, etc.;

2. Foundry industry: pipe rust removal machine uses different models according to different workpieces, and will not damage the original shape and performance of the casting.

3. Mold industry: The mold itself requires smoothness. The rust removal machine can be polished according to different requirements without damaging the original shape and performance of the mold.

4. Steel mills: The steel and steel plates produced by steel mills have many burrs when they are just out of the furnace, which will affect the quality and appearance of the steel. Use rust removal machine equipment to deal with these problems and solve them easily;

5. Shipyard: The steel plates used in shipyards have rust, which will affect the quality of shipbuilding. Manual removal of embroidery is impossible, and the workload will be very large. The rust removal machine equipment can remove rust to ensure the quality of shipbuilding.

• 

• 

Advantages of steel pipe derusting machine:

1. Adopting full-angle, same-directional three-speed dual-drive technology, the raw material contact surface is more complete, the force is more uniform, the rust removal is more thorough, and the rust and slag removal rate reaches 99.5%.

2. The work efficiency is more than 3 times higher than similar products.

3. The side teeth are made of manganese steel, which has a long service life. The central gear adopts a split structure. Only the side teeth need to be replaced when worn, and the replacement cost is low.

4. The torque of the adjusting frame is large, and the internal operation can be moved freely, which is convenient and labor-saving.

5. The steel pipe derusting machine adopts two-way transmission and three-speed feeding, and its diameter can be adjusted, which is suitable for the use of steel bars with different diameters.

• 

• 

6. The steel wire wheel is made of special steel with high elasticity coefficient, which forms a positive pressure effect with the oxide layer on the surface of the steel, which greatly guarantees unnecessary loss of raw materials.

7. Each system is driven by gears and belts, the machine is simpler to operate, runs more smoothly, and has low noise, safe, efficient and environmentally friendly.

8. Dust removal equipment is the supporting equipment of Steel pipe derusting machine. With this dust removal equipment, the environmental protection problem of steel pipe derusting machine can be fully solved.