Medical gloves production equipment is a machine and equipment produced by YG Machinery Company for manufacturing latex medical gloves. Generally, medical glove equipment is made of natural liquid latex, which is generally processed through a series of processes such as hand mold dipping tank, drying, curing and cooling, and sterilization and packaging.

• 

• 

Process composition of latex glove making machine:

Glove latex production equipment mainly consists of four parts: batching equipment, including mixers, filter barrels, vacuum deaerators, and glue delivery pumps; dipping equipment, including racks, conveyor chains, dipping tanks, recovery tanks, and drip tanks; plastic Chemical furnace; cooling, lip rolling, powder spreading, demoulding, and powder removal equipment, including cooling group, lip rolling group, powder spreading group, stripping module, and powder removal group. The production of medical gloves adopts a continuous production method and direct immersion method, with uniform film formation and bright color. Various models and specifications can be produced online at the same time. According to the different output, the length of the YG medical gloves production line is 60 meters, 80 meters, and 100 meters. Specifications, a high degree of automation, large output, automatic demoulding can be configured, and the length of the production line can also be designed and installed according to the customer’s production site.

• 

• 

Product features of latex glove machine:

1. The medical glove production equipment can be humanized design according to the curing molding process of various materials (natural rubber, nitrile rubber, PVC, etc.). The process is reasonable and the automatic balance glue system makes the product stable, and the thickness of the coating is uniform. , No sag, uniform temperature, high output, easy and simple demoulding.

2. The drying oven of the medical glove production equipment adopts the principle of hot air circulation to make the internal temperature of the oven uniform, and high-performance insulation materials are used to effectively ensure that the temperature is not lost, thereby improving the use of the machine’s thermal efficiency. The machine heating system adopts an automatic temperature control system with high coordination. The performance control switch improves the accuracy of temperature control, thereby increasing the pass rate of the product.

3. Especially designed elastic piston glove mold connection device, easy to change mold operation, no mold drop phenomenon.

The cement plaster spray machine basically has no floor ash, saves water and materials, can greatly reduce costs, and is simple to operate. It can be used for indoor and outdoor wall spraying. Cement mortar grouting, bridge grouting and waterproof surface spraying, fireproof spraying, thermal insulation material spraying, ceiling spraying, wall spraying, paint spraying, garden spraying, relief effect paint.

• 

• 

Product features of cement spraying machine

1. One machine for multiple purposes, can spray ordinary mortar, thermal insulation mortar, dry mortar, anti-cracking mortar, interface agent, putty, construction glue, adhesive, fireproof material, epoxy coating, etc. (materials must be mixed in advance).

  2. This machine is an electric screw-type high-pressure mortar spraying machine with advanced technology, simple operation and maintenance, and can be operated skillfully without special training.

  3. The operation is simple, and it can be sprayed indoor and outdoor.

  4. The spraying equipment has a large flow rate and high pressure, which overcomes the above-mentioned defects. The density of the mortar far exceeds the national standard, avoiding troubles caused by quality, construction period, labor cost and other issues.

• 

• 

The main application of Cement mortar spraying machine:

1. The rapid mortar spraying machine is widely used in engineering construction, mines, tunnels, culverts, subways, hydropower projects, underground projects and coal high-marsh mines and roadways sprayed concrete construction operations;

2. Various types of industrial furnaces and linings are sprayed or repaired with refractory materials;

3. In various slope protection and greening construction, soil transportation and spraying.

  4. Mortar spraying equipment can be used for damp spraying, dry spraying and individual fiber spraying operations.

• 

• 

The features and advantages of cement sprayer machine are:

1. Straight-through rotor type non-adhesive material cavity, smooth discharge, high efficiency and time saving;

2. Four-point elastic compensation and compression, good sealing effect, less dust around the machine, and long service life of wearing parts

3. Adopting low-pressure and high-speed vortex air conveying to overcome the problems of adhesion, pipe blockage and pulse separation in material conveying. The material flow is uniform and continuous and stable: new sprinklers, discharge elbow devices, improve spraying effects, and less rebound , The spray layer is of high quality.

4. The machine chassis can be assembled into tire type, skid type and rail wheel type with various gauges.

Compared with the dry sandblasting machine, the biggest feature is that it can well control the dust pollution during the sandblasting process and improve the working environment of the sandblasting operation.

The structure of the water sandblasting machine

1. water sandblasting machine generally constitutes a complete water sandblasting machine generally composed of five systems, namely structural system, medium power system, pipeline system, control system and auxiliary system.

2. The operating principle of the water sandblasting machine uses the grinding liquid as the feeding power of the grinding liquid, and the uniformly mixed grinding liquid (mixed liquid of abrasive and water) is transported to the spray gun through the grinding liquid pump.

• 

• 

The working principle of water sandblasting machine:

As the accelerating power of the grinding liquid, compressed air enters the spray gun through the air pipe. In the spray gun, the compressed air accelerates the grinding liquid entering the spray gun, and is ejected through the nozzle, and sprayed to the outside of the processing to express the expected processing intent. In the liquid sandblasting machine, the grinding fluid pump is the power supply, and the compressed air is the acceleration power.

• 

• 

The physical treatment method of sandblasting machine and the advantages of sandblasting technology

Sandblasting machine sandblasting method electroplating pretreatment, the concept of sandblasting machine is to grind the surface of pneumatic sand material. The sandblasting and electroplating process occupies a pivotal position. The main function is to remove impurities and oxide scale on the surface of the workpiece, and the surface area is increased. , Improve the adhesion of the coating and improve the quality of the sandblasted coating; the machine can also dissipate the residual stress in the structure, realize the surface hardening of the workpiece, improve the surface resistance to plastic deformation and fracture, and the surface compressive stress of the workpiece, and increase its fatigue Strength; damage surface defects and reduce processing workpieces, reduce stress concentration, etc.

• 

• 

Advantages of sand blaster machine:

1. It is processed by physical reaction and sandblasting, the basic metal parts are not damaged, and the dimensional accuracy will not change;

2. The surface of the workpiece is not contaminated, and the abrasive will not react with the material part.

3. The sand blaster machine can easily handle difficult-to-machine parts such as grooves and recesses, and various grit abrasive tools can be used.

4. The processing cost is greatly reduced, which is mainly reflected in the improvement of the work efficiency of the sandblasting machine, which can meet various surface processing requirements.

5. Low energy consumption and cost saving.

6. The sand blaster machine does not pollute the environment and saves the cost of environmental treatment.

Features of automatic cup mask making machine:

1: The adopted advanced servo and constant temperature control system is controlled by PLC program so that the material enters → forming → welding → punching is completed at one time, and the entire production process is fully automated.

2: The equipment only needs to be equipped with a fully automatic cup mask nose bridge strip ear strap welding machine, and it can produce countless types of cup mask products that are sold in the market.

3: The products are exquisitely made and the quality fully meets or exceeds the domestic and foreign testing standards. At the same time, it saves more than 30% of the materials used for mask equipment in the previous market. Thereby realizing the reduction of costs and the improvement of efficiency in a true sense.

• 

• 

All from the n95 mask machine:

Fully automated production of mask body machine, including feeding, plastic strip aluminum strip insertion/shortening, scene selection, ultrasonic fusion, slicing, etc. The entire process is automated. The output is extremely high, and it can produce 1-200 pieces per minute. The main power frequency conversion speed regulation can be fast or slow. Different materials can be used to produce different masks. The products have two layers and three layers, and the product quality is stable, easy to operate, low noise and small footprint. Applicable material: Spunbond filament non-woven fabric, 16-30 g/m², suitable for processing disposable masks.

Flat face mask making machine:

Flat face mask making machine ultrasonic inner ear face mask machine uses ultrasonic welding method. When the mask is moved to the processing position, ultrasonic waves are automatically generated, forming micro-amplitude and high-frequency vibration on the ear belt, which is instantly converted into heat to melt the material to be processed. Finally, the ear straps are permanently pasted or embedded on the inside of the mask body, which is the last processing step in the production of inner ear strap masks. Only one operator is required to place the mask body piece by piece in the mask tray. The equipment operates automatically.

• 

Folding mask making machine:

Butterfly face mask making machine Folding mask making machine, also known as C-type face mask machine, is a fully automatic machine used for the production of folding mask bodies. It uses ultrasonic technology to bond 3 to 5 layers of PP non-woven fabric, activated carbon and filter materials, and cut Cut out the foldable mask body, which can process 3M 9001, 9002 and other mask bodies. According to the different raw materials used, the masks produced can reach different standards such as FFP1, FFP2, N95, etc. The ear straps are elastic non-woven fabrics, which make the wearer’s ears comfortable and pressure-free. The mask filter cloth layer has a good filtering effect and perfect It fits the face shape of Asian people and can be used in high-pollution industries such as construction and mining.

• 

• 

Duckbill face mask making machine:

The automatic ultrasonic duckbill mask making machine (duckbill mask making machine) is a machine that uses the principle of ultrasonic seamless welding to produce duckbill masks suitable for high-polluting industries. The mask body of this machine can use 4~10 layers of PP non-woven fabric and filter materials (such as: melt blown cloth, activated carbon material, etc.), so that it can produce finished mask products with various filter levels such as N95, FFP2. And this machine has a very high degree of automation. From feeding to finished products, it is a one-line automatic operation: raw materials are automatically fed, an independent nose line conveying system, and the nose line can be automatically folded in the non-woven fabric, and automatically folded And the finished product is cut, and the breathing valve hole can be added automatically. The finished product produced by this duckbill mask machine has beautiful appearance; the machine has stable performance, high output, low defect rate and easy operation.

The various rock splitting equipment on the market are actually divided into three types in essence: small rock splitter machine, large hydraulic rock splitter, and plunger hydraulic splitter. The hydraulic rock splitter is composed of two parts: a hydraulic pump and a splitter. The working principle is that the pumping drive cylinder generates a huge driving force, and after mechanical amplification, the split object can be split in a predetermined direction. Compared with ordinary blasting operations, rock splitter has simple structure, convenient operation, high work efficiency, and low cost. On the road of development of rock mining technology, there are many kinds of rock technology, among which the rock splitter machine is widely used. The hydraulic splitting machine is suitable for mining various texture rocks, and will not produce vibration, noise, dust, etc. during work, can achieve silent mining, and will not affect the surrounding environment.

• 

• 

Plunger type rock splitting equipment

The plunger type rock splitter machine is composed of a cylinder, 6-9 pistons, multiple seals, and multiple high-pressure oil pipes. The construction operation using rock splitting rod is actually very simple. First use a drilling machine to drill the rock. The diameter of the hole is determined according to the type of splitting rod selected. The hole spacing and row spacing can be adjusted appropriately according to the rock hardness, generally 1.5 meters. To 2.5 meters. After drilling the hole, put the splitting rod into the hole, start the hydraulic main engine to open the hydraulic valve and start to apply pressure. It only takes more than a minute to split the rock; after splitting, the rock splitter is put forward, and the excavator’s breaker directly picks up the material. can.

• 

• 

The plunger type hydraulic rock splitter construction technology solves the long-standing problem that has not allowed us to use conventional blasting to demolish structures and the mining of rocks and ore under certain special conditions and special environments. The scientific research in the field of static blasting engineering has shown through long-term applications that, in earthwork engineering, for complex environments and high requirements such as inability to blast and low efficiency of rock crushing in deep foundation pits, imported splitting rods are used to prevent open surfaces. The ideal static explosion effect can also be obtained in the deep foundation pit.

The pile breaking machine can provide pressure to multiple cylinders at the same time. The cylinders drive drill rods distributed in different radial directions and simultaneously squeeze the pile body. It is like a concrete solid column with a diameter of one or two meters at the same time. Like a bean sprout, it was cut off instantly, leaving only steel bars.

The pile breaker can be connected to a variety of construction machinery, hung on excavators, cranes, telescopic booms and other construction machinery, simple operation, low noise, low cost, work efficiency is dozens of times that of manual pneumatic picks, two operations 80 piles can be destroyed in one day, which is especially suitable for pile group construction projects. The hydraulic pile breaker machine is divided into the shape of the pile cutting head, and can be divided into a round pile machine and a square pile machine. The square pile breaker is suitable for piles with a side length of 350-650mm. The round pile breaker adopts a highly modular combination, which can combine different numbers of modules through pin shaft connections to cut pile heads with different diameter ranges. Generally, the circular pile breaker is suitable for pile diameters between 600-2200mm, which can meet the wide requirements of pile foundation projects for high-speed railway bridges, buildings and other large-scale foundation constructions.

• 

• 

Advantages of concrete pile breaking machine:

1. The hydraulic pile breaking machine realizes high efficiency and low noise pile cutting;

2. Modularization, through the combination of different numbers of modules, to achieve pile heads with different diameters;

3. High cost performance, low operating cost, and cost performance is completely close to foreign products;

4. The pile breaking operation is simple, does not require professional skills, and the operation is quite safe;

5. The pile breaker can be connected with a variety of construction machinery to truly realize the versatility and economy of the product. Can be hung on excavators, cranes, telescopic booms and other construction machinery;

6. Long-life design brings benefits to customers.

• 

• 

Application of concrete pile cutting machine

The concrete pile cutting machine is suitable for cutting various pile foundation forms. Such as cast-in-place piles, cement piles, precast piles, etc. According to the shape of the broken pile head, there are round pile cutting machines and square pile cutting machines. Pile cutters are a common machine in high-speed railway bridges, industrial and civil construction pile foundation projects.

Ordinary circular pile drivers are suitable for pile drivers with a diameter of 200mm-2200mm. The square pile cutting machine is suitable for piles with a length of 300-650mm. Yugong pile cutting machine can meet the requirements of various large-scale foundation construction.

1. Single-drum vibratory roller compactor The single-drum vibratory roller compactor has the characteristics of large static linear load, deep compaction influence, and high work efficiency. It can effectively compact various types of sand, gravel and other non-cohesive soils, gravel, Different types of paving such as block stone and rockfill are suitable for the construction of earth and stone foundations such as roads, airports, embankment filling, seaports and dams.

• 

• 

2. Double-drum road roller machine The double-drum road roller machine is mainly used for the compaction of asphalt concrete, concrete and other pavements, and can also be used for the compaction of roadbeds, sub-roadbeds and stable layers.

 3. Tire road roller Tire road roller is a kind of compaction machine that relies on the gravity of the machine to increase the density of the working medium by statically compacting the paving material through a special pneumatic tire. It is widely used in various materials. The compaction operation of base layer, sub-base layer, filling and asphalt surface layer; especially in the compaction operation of asphalt pavement, its unique flexible compaction function cannot be replaced by other compaction equipment, it is asphalt mixture recompression The main machinery is also ideal compaction equipment for the construction of high-grade highways, airports, ports, dams, and industrial construction sites.

• 

• 

How to choose a road roller?

To ensure the quality of the project, when choosing a mini road roller for construction, it is better than choosing the best and most suitable small road roller. So how should the small roller compactor be selected specifically?

1. Choose according to the specific requirements of the project. Some projects have not so high requirements for ground compaction, while others require the ground to be compacted very tightly. Some require the road surface to be very smooth, and some require a simple pressure on the road surface. Different projects have different choices of road roller machine, so you should understand the requirements of the project before choosing a mini road roller.

• 

• 

2. Choose according to the material of the pavement. Some pavements are compacted with stones, some pavements are compacted with asphalt, and some pavements are only compacted with some soil. There is a big difference between these compaction objects, so the demand for mini roller compactor is also different, so you should also pay attention to this when choosing.

3. Choose according to the grade of the highway. Some roads are required to reach the national first-level level, some are second-level, and some are even lower. You don’t need to use a very good small roller to compact some roads that only need to reach the very low level of the country, which is very wasteful. And if the small road roller used does not meet the requirements and does not reach the national first-level level, this will not work, so this should be considered first when choosing.

The latex glove making machine adopts continuous production method and direct dipping method, with uniform film formation and bright color. Various models and specifications can be produced online at the same time. The length of latex glove production line is 30 meters, 60 meters, 80 meters, 100 meters and other specifications. The degree of automation High, large output, automatic demoulding can be configured, and the length of the production line can be designed and installed according to the customer’s production site. It refers to the machinery and equipment for the production of latex gloves using natural liquid latex as raw materials. Generally, it is processed through a series of processes such as hand-molded dipping tank, drying, curing and cooling.

• 

• 

Features of latex glove production line

1. Our factory is designed according to the chemical properties of the raw materials and the technological requirements of the glove forming process. The equipment process is compact and the mechanical structure is more reasonable.

2. In order to make the latex glove machine achieve the best effect under the minimum power, our drying box adopts the tunnel drying method, adopts the principle of hot air rising, and recovers the hot air to achieve cyclic mixing.

3. Choose a special high-temperature resistant chain to speed up production and increase production value.

4. Using the principle of hot air circulation in the heating space to reduce costs; multi-stage PID temperature intelligent control system, the temperature error does not exceed ±5°C, and the heat uniformity and gloss are good.

5. Active vibrating glue and uniform glue system make the product gloves have good regularity and thickness uniformity.

6. In view of the shortcomings that the ceramic mold is fragile when vibrated, the transportation mechanism of this equipment has selected a special guide rail to be stable, reliable and not jammed, and meet the stability requirements of the transportation equipment during operation.

7. High output value, universal joint design, simple operation of changing molds, speed up the cycle speed.

• 

• 

Latex glove Making  Machine Manufacturer—YG machinery

The latex glove making machine is a large-scale mechanical equipment. In order to reduce the trouble of installation and debugging for foreign customers, and facilitate the convenience of maintenance or equipment migration, a removable structure is specially designed to promote the best utilization of equipment. YG Machinery adopts building block production and assembly in the factory area, and performs initial mechanical adjustment before leaving the factory. Particularly conducive to the transportation and installation of export equipment. Of course, we not only have a latex glove making machine but also a meltblown cloth production line and a face mask making machine. Based on the principles of reputation, quality and customer satisfaction, YG machinery sincerely welcomes new and old customers to visit and buy, and we will serve you wholeheartedly!

Water well drilling rigs are mechanical equipment that drives drilling tools into the ground to obtain physical geological data in geological exploration, so they are also called drilling rigs. The main function is to drive the drilling tool to break the rock at the bottom of the hole, and the drilling tool that is lowered or raised in the hole can also be used to drill cores, cores, cuttings, gaseous samples, liquid samples, etc., to explore underground geology and mineral resources Wait for the situation. Mainly used in projects that need to be punched. Click here you can check our water well drilling rig for sale.

• 

• 

Preparation work before water well drilling machine work:

1. Check the oil level and coolant of the water well drilling rig, and whether the hydraulic oil of the drilling rig is sufficient.

2. Check whether the link screws of each part of the drilling machine are tight.

3. The lubricator should be added in time according to the use situation (the use of secondary pollution engine oil is prohibited).

4. Check whether the left and right chains are strenuous at the same time and adjust the same.

• 

• 

Working steps of water well drilling rig:

1. Drive the water drilling rig to a predetermined position, open the outriggers, level the drilling rig, and connect the air pipe.

2. Connect the impactor, the drilling machine will go down naturally, turn the button forward to start the drilling operation.

3. Press the open air, naturally, forward the button to start the drilling operation.

4. Increase the drill pipe: close the air valve, insert the large fork wrench into the lower opening of the upper opening of the drill pipe, press the reverse button, reverse 4 turns, separate from the impactor, lift it into the drill pipe, naturally go down, and turn forward , When the drill pipe is connected, stop forward rotation, open the air valve, and start drilling operations.

5. Repeat step 4, drill to the predetermined position to stop drilling.

6. Drill pipe lifting: Insert the large fork wrench into the upper opening of the drill pipe, turn it upside down one turn, pull the small fork wrench into the drill mouth, and lock it, remove the big fork and insert it into the upper opening of the second drill pipe, turn it upside down 4 Circle, take off the small fork, reverse 3 circles, and remove the drill rod.

7. Put the small fork in the drill mouth, put the big fork in the second drill pipe opening, and remove the drill pipe by turning it upside down 4 times.

8. Repeat 7 steps to complete the lifting of the drill rod.

The mortar sprayer machine is mainly used for spraying and pressure grouting of commercial mixed mortar, putty powder, refractory materials on the surface of the internal and external walls of the building. The working principle of the cement sprayer machine is to mix cement or similar cement products into the feeder, and the mixed slurry will be discharged continuously under pressure under the action of the screw pump and transported along the pipeline to the nozzle When the pressure wind is introduced, the slurry forms a jet under the action of the wind and sprays onto the wall surface. Roads, railway tunnels, urban subways, underground caverns of hydropower stations, etc., can be used for soil grouting for dams, slopes, and soft rock reinforcement, such as anchoring grouting, unity grouting, backfill grouting and tent grouting, etc. Modern construction equipment at the construction site.

• 

• 

Functional characteristics of cement plaster spray machine

For the types of commonly used spraying equipment, the first thing that construction workers think of is electrostatic powder spraying equipment, mortar sprayer machine and other spraying equipment. As for the mortar sprayer equipment that can also perform high-quality spraying on the walls of the home, how much do the constructors know about its main features? So, today we will briefly understand the functional characteristics of the mortar sprayer equipment, regarding the effect of changing the system component parameters of the mortar sprayer equipment! In fact, the raw materials of cement spraying machine and the system components in the efficiency equipment of high-quality cement mortar spraying machine, after the improvement of the polyurethane elastic method, their use effect and life expectancy will be significantly improved.

• 

The construction personnel can extend the use time of the mortar spraying equipment by replacing the impeller in the cement plaster spraying machine. Normally, for a four-inch mud pump in a cement sprayer machine, the use time range of the impeller is between 70 hours and 120 hours. However, when the construction personnel changed the impeller to a modified polyurethane elastic impeller, the impeller had a time range, which was expanded to 720 hours. In other words, based on the principle of cement mortar pump shotcrete machine, the improved polyurethane elastic impeller has a service life that is six to ten times longer than that of the traditional impeller.

• 

• 

mortar sprayer machine manufacturer—YG Machinery

The cement plaster spray machine can spray the paint more evenly on the wall to increase the adhesion between the paint and the wall, avoiding rework due to bad conditions. The bigger advantage is that it can be applied to different wall work. Help us save costs and work energy, and at the same time improve our work efficiency. Therefore, it is still necessary to buy a mortar spraying machine at the construction site.

Henan Yugong Machinery Co., Ltd. is a reliable machine manufacturer, which designs and produces many different models of cement sprayer machines for sale. Customers can refer to the pictures and parameters of different mortar spraying machines for selection. Then, you can send us an email or call us directly to get the price list and more detailed information.