The intelligent environmental protection dust removal and dust suppression fog cannon machine for construction sites is composed of a fan, a rotating bracket assembly, a pitch adjustment device, a spray system, a base, an electric control system, and accessories. The principle of the fog cannon machine is that the particles produced by the spray can control the dust in the air and reduce the dust, thereby producing the dust fixing effect. Because the particles are very small, the surface tension is basically zero and sprayed into the air. It can quickly adsorb large and small particles in the air, and can effectively control the amount of dust. The dust solidification effect is obvious, and the atomization effect is obvious; it will not produce water droplets and moisture, and the environmental protection dust reduction mist cannon will not corrode metal equipment. At present, the world’s dust control and dust suppression equipment can handle dust generated under the following working conditions: coal mines, material handling, garbage disposal, construction and demolition, material warehouses and ports, and other open places. In addition, fog cannons are widely used to reduce urban PM10 and PM2.5, and their dust reduction efficiency exceeds 85%. The dust removal fog cannon machine on the construction site protects the production equipment. The mist cannon is safe, simple to operate, reasonable in design, environmentally friendly and energy-saving, with high quality and low price.

• 

• 

Fog Cannon Machine features:

1. The product has strong wind, high range (far) and good penetration. It can achieve precise spraying, with fine mist particles, and can control the settlement of dust in the mining area;

2. The work efficiency is high, the speed is fast, and its coverage area is much larger than other dust suppression spray equipment.

• 

3. The 50-meter fully automatic remote control fog cannon makes the spray more stable and has a longer range in windy conditions. The machine is equipped with a 1000-meter remote control device and signal receiver.

4. It can remotely control the 360-degree rotation to control the direction of the air supply. The control of the air cylinder adopts a hydraulic device, which makes the service life of the machine longer.

• 

5. The machine is now called dust mist cannon, also known as dust mist sprayer or dust mist cannon. It is mostly used on construction sites. This type of dust-reducing fog gun has a range of 50 meters and also has a range of 30 meters, 40 meters, 60 meters, 70 meters, and 120 meters.

6. Large mist cannons are mostly used in urban dust and haze removal, and medium-sized mist cannons are used in mines, airports, garbage treatment plants, steel plants, etc.

The sandblaster machine uses compressed air as the power to form a high-speed jet beam to spray the spray material on the surface of the workpiece to be processed at a high speed so that the mechanical properties of the outer surface of the workpiece surface are changed. Due to the impact and cutting action of the abrasive on the surface of the workpiece, The surface of the workpiece has a certain degree of cleanliness and different roughness, so that the mechanical properties of the workpiece surface are improved, thus improving the fatigue resistance of the workpiece, increasing the adhesion between it and the coating, and extending the coating film Durability is also conducive to the leveling and decoration of the coating, removes impurities, mottled colors and oxide layers on the surface, and at the same time roughens the surface of the medium, makes the surface residual stress of the substrate and improves the surface hardness of the substrate. Contact us to get sand blasting machine price right now.

• 

• 

1. Sandblasting equipment can remove all the dirt on the surface of the workpiece before coating and bonding the workpiece, and establish a very important basic pattern on the surface of the workpiece (the so-called rough surface), and can pass Changing the abrasives of different particle sizes, such as flying-spread abrasives, can achieve different degrees of roughness, which greatly improves the bonding force between the workpiece and the coating and plating. Or to make the bonding part stronger and better quality.

• 

2. Mobile sandblasting equipment Cleaning and polishing of the rough surface of castings and workpieces after heat treatment. Sandblasting can clean all dirt (such as oxide scale, oil stains, etc.) on the surface of castings and forgings and workpieces after heat treatment, and polish the surface of the workpiece to improve the workpiece The smoothness of the workpiece can make the workpiece show a uniform and consistent metal color, and make the appearance of the workpiece more beautiful and beautiful.

• 

3. The sand blaster machine machining parts burr cleaning and surface beautification sandblasting can clean up the tiny burrs on the surface of the workpiece, and make the surface of the workpiece smoother, eliminating the hazard of the burr, and improving the quality of the workpiece. And sandblasting can make small round corners at the junction of the surface of the workpiece, making the workpiece more beautiful and more precise.

• 

4. Small sand blasting machine improves the mechanical performance of the parts. After the mechanical parts are sandblasted, they can produce uniform and fine uneven surfaces on the surface of the parts, so that the lubricating oil can be stored, thereby improving the lubrication conditions, reducing noise, and increasing the service life of the machine.

• 

5. Automatic sandblasting machine light decoration function For some special-purpose workpieces, sandblasting can achieve different reflective or matt at will. Such as the polishing of stainless steel workpieces and plastics, the polishing of jade, the matting of the surface of wooden furniture, the pattern on the surface of frosted glass, and the texturing of the surface of the cloth.

The mortar spraying machine is the auxiliary equipment of the construction project, which saves labor and improves the progress of the project. The mortar sprayer feeds the mixed materials from the mechanical port of the distribution mixer to the hopper of the sprayer through the vibrating screen through the screw feeding shaft. It is sent to the high-pressure chamber, and the high-pressure rotor and high-pressure stator are rotated to form high pressure. The mortar is sent to the spray gun through the high-pressure conveying pipe, and another high-pressure wind is introduced from the spray gun to blow the material away and accelerate the spray out.

• 

• 

The mortar spraying machine is composed of a complete set of conveying systems. There is no cavity in the system and the ability to resist negative wind pressure is strong, so it is suitable for spraying of multi-story and high-rise buildings. The cement plaster spray machine adopts soft anti-cracking technology, the elastic modulus of each layer of material is matched and gradually changed layer by layer, allowing deformation and limiting deformation combined, so it can disperse and eliminate deformation stress at any time, effectively preventing the appearance of wall cracks. Practice shows that increasing the density of the blade mortar sprayer can increase the fineness of the finished product under the condition of the same speed. That is to say, when the fineness of the finished product does not need to be changed, the high-density impeller can rotate at a slower speed than the low-density impeller, reducing airflow Resistance, the output of finished products will increase by 50% under the same power.

• 

• 

Precautions for spraying of mortar sprayer:

Mortar spraying equipment can be used for mixing and spraying concrete. When mixing concrete, pay attention to the mixing time and the order of feeding. Attention should be paid to spraying operations: spraying distance, spray gun operating speed, the overlap of spray patterns, and paint viscosity. Only by paying attention to these aspects can the most satisfactory spraying effect be obtained. The specific points of attention are as follows:

• 

1. When using a large spray gun, the spraying distance should be 20~30 cm, and when using a small spray gun, the spraying distance should be 15~25 cm. If the distance is too close, the spray will be thick, and too far will be thin.

2. The running speed of the spray gun should be kept at a uniform speed, generally, the speed is 30-60 cm/sec. Too slow is easy to cause sagging, and too fast is easy to leak.

3. The overlap of spray patterns needs to accumulate experience in daily work in order to maximize the spraying effect.

4. The temperature of the sprayed paint should be controlled at 20-30°C, otherwise it will affect the viscosity of the paint and thus affect the spraying effect.

Friends who need to use the broken pile breaker, today I will tell you how the hydraulic pile breaker of YG Machinery breaks the pile breaker machine, which is the principle of the pile breaker. We know that in the past, the method of breaking the pile head was to hit with a breaking hammer, and the fire manpower used a pneumatic pick to break it. But this method has many disadvantages in the past. For example, the impact of the breaking hammer is not bad, but the impact force is often too large, causing the internal structure of the pile head to be shaken and prone to safety hazards. The use of artificially broken pile heads is too labor-intensive and inefficient.

• 

• 

With the development of hydraulic technology, pile breakers and pile cutters have gradually appeared on the pile head sites of major constructions, and hydraulic pile breakers have been well known by more people.

The hydraulic pile breaker provides pressure to a single module of the pile breaker through a hydraulic cylinder. The hydraulic cylinder directly drives the drill rod to squeeze the pile body to achieve the purpose of the pile head. During the operation of the pile breaking machine, the operation is simple and does not require professional skills. The operation is quite safe, low-cost, and efficient, and it is very suitable for pile group breaking projects. The pile breaking machine adopts a modular combination of uniform specifications. The modules are connected by pin shafts, and the pile heads of different diameters can be cut off through the combination of different module numbers (the broken pile range is 0.6-2.5 meters).

• 

• 

Pile Breaker for Sale

The piston of this hydraulic cylinder is made of alloy steel, which can meet the crushing requirements of concrete pile heads of different grades. The power source of the hydraulic cylinder can be an excavator or a piece of mobile construction machinery or a fixed hydraulic station.

In most cases, an excavator is used as a power source in bridge construction, and the hoisting chain for the bucket is removed, and then the hydraulic oil circuit is connected to the cylinder oil circuit of the pile breaker to break the pile. The pile breaker of this combination is more convenient to move and has a wider working surface. Many hydraulic stations are used in the construction of pile foundations of high-rise buildings, which are not very convenient to move, and are suitable for the removal of pile heads of pile groups.

• 

• 

The pile breaker machine is a new type of pile driving equipment that squeezes and splits the pile body through hydraulic principles. Especially in sites with strict environmental protection requirements, such as the strict control of dust layer and noise, YG Machinery‘s concrete pile breaker has its irreplaceable advantages. This equipment is suitable for the removal and destruction of the pile cutting machine of high-speed railway piles, bridges, and housing construction pile foundation projects. The efficiency is dozens of times that of manual construction, and it is also operated with construction machinery. For example, the pile breaker of the excavator, or the use of a crane with a hydraulic station, etc., to safely remove the pile driving equipment and avoid the risks caused by manual operation.

1. Choose according to engineering quality requirements:

1. If you want to obtain a uniform compaction density, you can choose a tire road roller. The tire road roller does not destroy the original viscosity of the soil during compaction, and there is good bonding performance between the various layers of soil. The front-wheel can swing, so the compaction is more uniform and there will be no false compaction.

2. If you want to make the road surface compact and smooth, you can choose a full-drive roller compactor.

In areas where the compaction capacity of the roller is not high, a flexible roller compactor with lower line pressure can be used.

To achieve the compaction effect as soon as possible, a large-tonnage roller compactor can be used to shorten the construction period.

• 

• 

2. Choose according to layer thickness:

1. When rolling asphalt concrete pavement, the weight, amplitude, and vibration frequency of the road roller machine should be selected according to the paving thickness of the mixture. Generally, on thin pavements with a ply thickness of less than 60mm, it is best to use a small 2-6t vibratory roller compactor with an amplitude of 0.35~0.60mm, so as to avoid piles, waves, and damage to aggregates;

2. At the same time, in order to prevent the asphalt mixture from being too cold, it should be rolled immediately after paving. For thick plies with a thickness greater than 100mm, a high-amplitude (up to 1.0mm), 6-10t large and medium-sized vibratory road roller should be used.

• 

• 

3. Choose according to the type of road:

1. For primary and secondary national arterial roads and dedicated roads for automobiles, a large vibratory road roller with a high compaction capacity of 6~10t should be used; for roads below grade three, or when compaction operations are not frequently performed, it is best Equipped with a maneuverable and flexible vibratory roller compactor of about 2t.

2. For cement concrete roads, tire-driven tandem vibratory rollers compactor can be used;

3. For asphalt concrete pavement, a full-drive vibratory road roller should be used;

4. For the bottom layer of high-grade pavement roadbed, it is best to use tire road rollers or tire-driven vibratory rollers compactor for compaction to obtain uniform density;

5. When repairing the pavement, a static action smooth roller can be used.

• 

• 

4. Choose according to the type of material to be pressed:

1. For the compaction of rock fills, large tonnage road rollers should be used to displace large blocks;

2. For the compaction of clay, it is best to use a bump tamping roller;

3. For the compaction of the mixture, it is best to choose a vibrating road roller to make the large and small particles mix evenly;

4. For deep layer compaction, heavy-duty vibratory road rollers should be used for slow-rolling, while shallow layers should be statically applied road roller machine.

As a kind of construction machinery, small water well drilling rigs have gradually expanded their application areas with their superior performance. This type of water well drilling rig can quickly sample, quickly find ore in difficult and dangerous areas, and has high efficiency! And the price is affordable.Send your requirement to us if you need to buy water well drilling equipment for sale.

• 

• 

The small water well drilling rig adopts a full hydraulic drive and is driven by a fixed chain to make the transmission more stable. In addition, an automatic rod changing device and an automatic shackle device is adopted to reduce the work intensity of the operation and improve the drilling efficiency. And with the promotion of the humanized design concept, while developing the machine, it also fully considers the adverse effects of the machine on people, and continuously improves the operation performance and working environment of the machine, and improves work efficiency. Compared with the past small water well drilling rig, it has significant advantages.Now contact us to get a cheap portable water well drilling rigs factory price.

• 

• 

1. Lightweight, flexible, safe, and reliable. This type of drilling rig has a compact and concise structure, and each part of the drilling rig, including the drill rod, has a small overall volume and is convenient to transport. Even in areas with inconvenient traffic conditions, it can be transported by hand or by packhorse through trails, which greatly saves customers the investment in building temporary roads, shortens the exploration period, saves labor, and reduces transportation risks and costs. In addition, the drilling rig adopts hydraulic drive, modularization, safe and reliable structure, easy to operate, reduces labor intensity, and is more user-friendly; the airport uses 12 volt DC power supply, which is safer; when the machine is moved, it is easy to disassemble and install. Easily complete the movement of the drilling rig.

• 

• 

2. The novel structure of the rig is safe. The drilling rig can drill inclined holes from -45° to -90°, without the need for tower operation, which reduces the safety risk of tower operation and increases the safety factor of operation.

3. The compact water well drilling rig is conducive to environmental protection. It is especially suitable for construction in environments with large cutting terrain in mountainous areas or in forest areas. The installation site for drilling rigs is small, and there is no need to build temporary transportation roads. It solves the large amount of earth and stone excavation or cuts more trees when leveling the machine, reducing the impact on vegetation and Environmental damage, reducing the amount of compensation for temporarily rented land for drilling, so as to protect the construction site and surrounding environment to the greatest extent.

• 

• 

4. High quality and high efficiency in energy saving and consumption reduction. The diamond drill bit of the small water well drilling rig has a higher rotation speed, the drilling tool can cut the rock more smoothly, greatly shortening the exploration period and reducing the cost. The rig is not only fast, but also has low average fuel consumption, and the core collection rate can reach more than 95%.

As for the production line for the automatic plastic film disposable glove researched by our company, the final product is separated from the scrap material. One machine is operated by one worker. It has advantage of long continuous work time, high output and low cost of workforce. This machine also could be customized for film finger cot &  heteromorphic special plastic product. It is controlled by touchscreen. 3 phases mixed motors to drag the material. The users could count and set up the quantity at will. Many kinds of shapes of cutting dies could be customized and it is assemble and unassemble easily.

• 

Plastic Glove Making Machine Features

PE glove making machine has been modified to produce relative medical and health product such as grind arenaceous gloves and finger cot. It is widely for hotel, medical ans health, family life, paint protection, beauty and hairdressing, garden work, cleaning work and etc. It is suitable for HDPE and LDPE plastic film sealing cutting gloves. It is also a better choice machine for fast food restaurant use such as KFC.

• 

• 

Why choose YG PE gloves manufacturing machine?

YG Machinery specialize in R&D, manufacturing and sales of machinery and equipment production lines and provide whole plant project proposal service. For example, disposable (Latex/Nitrile/PE/PVC) gloves making machine. Mask making machine. Melt-blown fabric cloth production line. Wet wipes production line and so on. In addition to the unified machine developed and produced by ourselves. YG Machinery can also accept machine customization. So as to manufacture machinery that is more in line with your needs, in order to reduce your cost of purchasing machines and save energy during use. Please feel free to leave your requirements.

• 

• 

Glove Making Machine Manufacturer

We have fully automatic disposable PE gloves making machine for sale and semi-automatic double-layer plastic gloves making machine for sale. Fully automatic hand gloves manufacturing machine is a mechanical arm to tear the finished disposable clear plastic gloves. Semi-automatic plastic hand gloves manufacturing machine is manually tearing the finished PE gloves. Which PE glove making machine do you need? If you are looking for a reliable and powerful gloves production line manufacturer or wet wipes machine factory, Henan Yugong Machinery Co,. Ltd will be your ideal partner.

Cracks are the most common, most prone, and one of the earliest road diseases among all types of road damage. It accompanies the entire service life of the road and increases with the age of the road. After cracks appear on the asphalt pavement, the pavement will soak the pavement structure layer underwater, reducing the bearing capacity of the pavement. In order to prevent serious damage to the asphalt pavement and extend the life of the road, it is necessary to grout the asphalt pavement in time. The pavement equipment used at this time is the asphalt crack filler machine.Contact us to get asphalt crack filler machine price  right now.

• 

• 

The working principle of the crack sealing machine:

Asphalt crack filler machine is mainly divided into hand-push type asphalt filling machine and self-propelled type filling machine with hand-held potting pipe for operation, using imported diesel burner for heating, first add asphalt potting glue in the bin during work. Start the generator to supply power, and turn on the heat transfer oil pump switch in turn. Burner switch, discharge pipe heater switch; adjust the automatic temperature control system to be the same as the temperature of the material. The heat conduction oil in the melting tank is automatically heated by the diesel burner to heat up the material to melt. The temperature is controlled by the automatic control system. The melting time is about 30-40 minutes. After the material is melted and the temperature of the discharge pipe is reached, work can be carried out. The hand-held potting pipe can be used to deal with the positive crack potting. The discharge flow of the asphalt pump can be adjusted. Add materials at any time to maintain normal and continuous work. Asphalt crack sealing equipment first cleans the cracks before potting the cracks to ensure that the asphalt melt can fully fill the cracks.If you are looking for asphalt crack filler machine for sale, please leave your message.

• 

• 

Advantages of asphalt crack sealing equipment

1. The international famous brand generator can provide a stable and efficient output for the whole machine, and work stably and reliably;

2. The humanized handle design of the grouting gun is equipped with an electric switch on the handle of the grouting gun, which can remotely control the asphalt pump to avoid waste, sanitation, and cleanliness;

3. High-temperature professional asphalt pump, with high conveying pressure, deep material embedded in cracks, guaranteed construction quality, stepless adjustment of material flow, suitable for crack repair operations of various widths and shapes.

In modern society, due to the continuous deterioration of the natural environment and the strengthening of people’s awareness of protection, the market demand for disposable medical masks and protective masks is expanding. Many customers are keenly aware of this business opportunity and want to get involved in the mask production industry. However, in view of the unfamiliarity with the mask production process, the purchase of mask raw materials, the selection of mask making machine manufacturers, the planning of the mask production workshop, the industry standards for mask production, etc., when inquiring about and consulting relevant information and making relevant budgets, Looks very blind and confused.Contact us to get mask making machine price right now.

• 

• 

First of all: Masks are simply divided into flat masks and three-dimensional masks from the appearance. Flat masks are mostly used in the medical industry, and three-dimensional masks are mostly used for daily protection. This article is mainly for the purchase of an ultrasonic flat mask machine (ultrasonic medical mask machine).Send your requirement to us if you need to buy medical face mask making machine for sale.

Second: The flat mask making machine series can be divided into inner ear mask machine production line, outer ear mask machine production line, and band mask machine production line according to the welding method and use method of the rear strap.

• 

The face mask making machine is to make various masks with certain filtering performance through the processes of hot pressing, folding forming, ultrasonic welding, waste removal, ear belt, and nose strip welding. The mask equipment is not a single machine, it needs The cooperation of multiple machines to complete various processes.

The flat mask machine series can be divided into inner ear mask machine, outer ear mask machine, strap mask machine according to the welding method and use method of the ear belt. The production of these three flat masks requires the mask body machine. It is An indispensable part of a flat mask.Click here you can check our disposable medical face mask making machine for sale.

• 

When making masks, all raw materials are polypropylene (PP), and medical masks are generally referred to as SMS structure. Among them, the spunbond layer is a single layer, and the meltblown layer is divided into a single layer or multiple layers according to filtration requirements. “Meltblown cloth“, commonly known as the “heart” of masks, is the filter layer in the middle of masks. It has good filtering, shielding, heat insulation, and oil absorption properties and is an important raw material for the production of masks. Polypropylene high-melt finger non-woven fabric is the best choice for masks. It can also be used in disposable surgical gowns, sheets, cover cloths, liquid absorbent pads, and many other medical supplies.

Road Marking machine, a road construction machine that is widely used in roads, high-level highways, parking lots, squares, and runways to draw different restrictions, guidelines, and warning signs on flat ground. The line marking machine has played a huge role in urban planning and highway construction with its advantages such as fast, efficient, and accurate, saving the construction period, and economic investment of road construction to the greatest extent. YG Machinery is a professional road machinery manufacturer, selling various types of road marking equipment, such as cold spray road marking machine and thermoplastic road marking machine, Click here you can check our line marking machine for sale.

• 

• 

The composition of the Road Line Marking Machine:

The structure of the road line marking machine is diverse, and the structure will differ due to different production design conditions or the application of different construction objects and different materials. The line marking equipment generally has an engine, an air compressor, a paint (melt) barrel, a marking bucket (spray gun), a guide rod, a controller, and other devices, and various power-assisted drive carriers are configured as required.

Engine: Most line marking machines use engines as power, and some use batteries as power. If an engine is used, its power ranges from about 2, 5HP to 20HP. It has stable performance and easy purchase of spare parts. It almost determines the operating performance of the entire equipment; if a battery is used as power, it must also be considered to be able to run on each charge. It’s best not to be less than 7 hours (approximately 1 day’s working time).

• 

• 

Air compressor: For road line marking machines that rely on air for spraying (not hydraulic spraying), it is also the main component that affects the performance of the whole machine.

Tank: There are two main functions: one is to hold paint. In this sense, its capacity will affect the number of fillings and the progress of the operation. Another feature that many users overlook is that the vessel is still a pressure vessel. It is pressurized by an air compressor and becomes a pressurized “air tank” which becomes the driving force for the marking work. In this sense, The airtightness, safety, and corrosion resistance of the product should be considered by users.

Spray gun: one is to use the “spray box” for spraying, which is relatively cheap, especially suitable for sports field lawns and general parking lot construction; the other is to use spray guns for spraying, which is strictly a spray gun, but its nozzle The price is relatively high.