Sandblasting machine is a kind of machine that uses compressed air as the power to form a high-speed jet beam to spray the spray material on the surface of the workpiece to be processed at a high speed, so that the mechanical properties of the outer surface of the workpiece surface are changed. The mobile sandblasting equipment is suitable for cleaning the rough surface of forging castings, stamping parts and machining parts, for spraying, pretreatment before electroplating, and strengthening the surface of light decoration parts. The automatic sandblasting machine is especially suitable for small and medium-sized parts. produce.

• 

• 

How to choose a sandblasting machine?

1. It depends on the size of the workpiece to choose box sandblasting machine, mobile sandblasting machine and automatic sandblasting machine.

2. It depends on the shape of the product to choose the specifications of the sandblasting machine. Generally, the specifications of the sandblasting machine below one meter are fixed. Especially large ones should be customized or open.

3. The degree of requirements on the product surface depends on whether it is dry spray or wet spray. If it is dry spray, the choice of abrasive is many. Wet spray is generally glass sand.

4. Some parts of the sandblasting machine should be familiar with sandblasting guns and sandblasting gloves, which are often changed because sandblasting is actually very worn.

• 

• 

The function of automatic sandblasting machine:

1. Sandblasting equipment is used for cleaning the surface of workpieces. Sandblasting equipment can be used as a corrosion layer on metal, residual salt and oxide layer on the surface of heat-treated parts, oxide layer on the surface of rolled parts, oxide layer on the surface of forging parts, and surface of welded parts. The oxide layer, the molding sand and oxide layer on the surface of the casting, and the adhesion layer on the surface of the machined part reveal the nature of the matrix.

2. Sand blaster machine is used for the pretreatment of the workpiece surface before coating.portable shotblasting machine can be used as the pretreatment process of various electroplating processes, brush plating processes, spraying processes and bonding processes to obtain active surface enhancement coatings, coatings and Adhesion between bonding parts.

3. Sandblasting equipment can change the physical and mechanical properties of the workpiece. Sandblasting equipment can change the surface stress state of the workpiece. Improve the lubrication conditions of the mating part. Reduce the noise during the movement of the mating part. Harden the surface of the workpiece. Improve the wear resistance and fatigue strength of the part. .

4. Sandblasting equipment is used for the finishing of the surface of the workpiece. Sandblasting equipment can change the surface roughness of the workpiece to produce a matt or diffusely reflective surface of the workpiece to achieve the purpose of finishing.

• 

• 

Advantages of sandblasting machine

1. The dimensional accuracy of the metal parts of the sandblasting equipment will not change.

2. The surface of the part is not contaminated. The abrasive will not chemically react with the material of the part.

3. The sandblasting equipment can easily handle the difficult-to-contact parts such as grooves and pits. A variety of abrasives can be selected for use.

4. The substantial reduction in processing costs is mainly reflected in the improvement of the work efficiency of the sandblasting equipment to meet various surface finishing requirements.

5. Low energy consumption and low cost.

6. The sandblasting equipment does not pollute the environment and saves the cost of environmental treatment.

 Sandblasting machine is divided into dry sandblasting machine and water(wet) sandblasting machine, each of which has advantages. Do many people ask whether dry sandblasting is better for rust removal or water sandblasting for rust removal? Today I will lead you to learn about water blasting and dry blasting.

• 

• 

Portable Dry Sandblaster Machine for Sale

First of all, let’s understand dry sandblasting. The rust removal method currently used by most companies is dry sandblasting. Dry sandblasting is driven by mechanical centrifugal force or compressed air to pass abrasives (iron shot or sand) The special nozzle sprays on the surface of the workpiece at a high speed and removes the dirt and rust layer by means of impact and friction. The processing quality is still relatively good. But the environmental problem of dry sandblasting has always been a pain point.

The dry sandblasting machine method is low in cost, but the dust generated during the work is large, which pollutes the environment, and it also seriously endangers the health of the operators. In addition, the dry sandblasting method sometimes produces sparks during the work. Used inflammable and explosive places.

• 

• 

Wet Sandblasting Machine for Sale

The water blasting machine of Henan YG Machinery is a combination of water jet and sandblasting. It has the environmental protection and explosion-proof characteristics of water jet and the superior rust removal and paints removal effects of sandblasting. It is very suitable for inflammable and explosive. For anti-corrosion operations, especially in the normal operation of oil storage tanks.

YG water sandblasting machine can be used to clean the surface of parts, as well as the pretreatment of coating and flaw detection processes. It can clean the oxide scale, residual salt, sand, oil, rust, carbon deposits of heat-treated parts, welded parts, castings, forgings, etc. The cleaning quality of release agent, welding slag stains, paint film, plating, and other contaminants can reach Sa3 level, and at the same time, it can obtain active surface and improve the adhesion of coating and plating.

The water blasting machine belongs to pure physical cleaning. It only needs to be connected to the power and water source when using it, without adding any chemical agents. It is a high-tech product promoted by a green country. In general, it is recommended to use water sandblasting to remove rust. Although the price is not as low as dry sandblasting, water sandblasting is more environmentally friendly and safer.

• 

• 

Related Machine:

As we all know, a sandblasting machine is used to remove rust. In addition, you must have heard of a shot blasting machine to remove rust. Although they are used to remove rust, the shot blasting machine is mainly used to rough the road surface, and the sandblasting machine is mainly used to remove rust. The surface of the workpiece is rusty. In addition, we also have a sandblasting room and a through-type shot blasting machine to remove rust on the surface of the object. If you want to invest in a new project and quickly obtain benefits, please contact us.

Sand blasting machine and shot blasting machine are two different surface rust removal and surface roughening equipment. The shot blasting machine and the sandblasting machine look the same, but they are actually quite different. So what is the difference between them?

• 

• 

The working principle is different:

The shot blasting machine uses a high-speed rotating impeller to throw small steel shots or small iron shots out to hit the surface of the part at a high speed, so the oxide layer on the surface of the part can be removed. At the same time, steel shot or iron shot hits the surface of the part at high speed, causing the lattice distortion and deformation of the surface of the part, which increases the surface hardness. It is a method of cleaning the surface of the part. Shot blasting machine is often used to clean the surface of the casting or the surface of the part. Strengthen processing. Generally, shot blasting is used for regular shapes, etc., several blasting heads go up and down, left and right together, with high efficiency and low pollution.

• 

• 

The sandblasting machine uses compressed air as power to form a high-speed jet beam to spray the spray material on the surface of the workpiece to be processed at high speed, so that the mechanical properties of the outer surface of the workpiece surface are changed. There are many types of sandblasting machines, but the ultimate goal is to improve the fatigue resistance of the workpiece, increase the adhesion between it and the coating, extend the durability of the coating film, and also benefit the leveling and decoration of the coating. , To remove the impurities, variegated color and oxide layer on the surface, and at the same time make the surface of the medium rough, eliminate the residual stress of the workpiece and improve the surface hardness of the substrate.

The materials used are different:

The steel shot and iron shot used by the shot blasting machine are not actually shots in the true sense. To be precise, they are small steel wires or small steel rods. They only look like balls after a period of use.

The sand used by the sandblasting machine is just river sand, which is no different from that used for construction, except that the sand used for sandblasting is screened, contains less mud, and has a particle size specification. Of course, some industries are different. For example, real steel shot is used for shot blasting in the shipbuilding industry, and metal ore is used for sand blasting.

• 

• 

The difference between sandblasting machine and shot blasting machine

1. The sand blasting machine uses compressed air as the power, and the compressed air carries sand (emery, corundum, etc.) to impact the surface of the workpiece; the shot blasting machine uses an electric high-speed impeller to project steel shots to impact the surface of the workpiece;

2. Different materials are used on the surface of the impact workpiece. High hardness and wear-resistant materials such as corundum and emery are used for sandblasting, and metal particles of various special materials and shapes are used for shot blasting (called shot blasting);

3. The surface hardness obtained by sand blasting machine and shot blasting machine is different, and shot blasting has surface hardening effect;

4. Shot blasting machine and sand blasting machine are both surface treatment, but it does not mean that only castings are shot blasting;

5. The main function of the sand blasting machine is to remove rust and scale on the surface, such as parts after heat treatment, while the shot blasting machine has more functions and functions: not only removes rust, removes surface scale, but also improves surface roughness , Remove the machining burrs of the parts, eliminate the internal stress of the parts, reduce the deformation of the parts after heat treatment, and improve the surface wear resistance and pressure ability of the parts;

6. The steel shots and iron shots used by the shot blasting machine are not actually shots. To be precise, they are small steel wires or small steel rods. They only look like shots after a period of use. The sand of the so-called sandblasting machine is just river sand, which is no different from that used for construction, except that the sand used for sandblasting is screened, contains less mud, and has different particle sizes. Of course, some industries are also different. For example, the shot blasting machine in the shipbuilding industry uses real steel shot, and the sand blasting machine uses metal ore.

 Automatic sandblasting machine uses compressed air as power to form a high-speed jet beam to spray materials (shot peened glass beads, steel shot, steel sand, quartz sand, emery, iron sand, sea sand) on the surface of the workpiece to be processed at high speed. Laser The cast iron platform of the cutting machine laser cutting equipment changes the mechanical properties of the outer surface of the workpiece surface. Due to the impact and cutting action of the abrasive on the workpiece surface, the surface of the workpiece obtains a certain degree of cleanliness and different roughness, which makes the surface of the workpiece The mechanical properties are improved, so the fatigue resistance of the workpiece is improved, the adhesion between it and the coating is increased, the durability of the coating film is prolonged, and it is also conducive to the leveling and decoration of the coating, and the surface impurities and variegated And the oxide layer is removed, and the surface of the medium is roughened at the same time, so that the residual stress on the surface of the substrate and increase the surface hardness of the substrate.

• 

• 

Sand blasting machine for Sale Function:

1. sand blasting machine is used to clean the surface of the workpiece: the sandblasting equipment can be used as the rust layer of metal, the residual salt and oxide layer on the surface of heat-treated parts, the oxide layer on the surface of rolled parts, the oxide layer on the surface of forging parts, and the surface of welded parts. The oxide layer on the surface of the casting, the sand and oxide layer on the surface of the casting, the residual dirt and tiny burrs on the surface of the machined parts, and the surface of the old machine parts are treated to remove the surface adhesion layer and reveal the nature of the substrate.

• 

• 

2. Sandblasting equipment is used for the pretreatment of the workpiece surface before coating: the portable shotblasting machine can be used as the pretreatment process of various electroplating processes, brush plating processes, spraying processes and bonding processes to obtain an active surface, improve the coating, The adhesion between the coating and the adhesive.

3. Sandblasting equipment can change the physical and mechanical properties of the workpiece: small sandblasting machine can change the surface stress state of the workpiece, improve the lubrication conditions of the mating parts, reduce the noise during the movement of the mating parts, harden the surface of the workpiece, and improve the wear resistance of the parts Resistance and fatigue strength.

4. automatic sandblasting machine is used for the finishing of the surface of the workpiece: the sandblasting equipment can change the surface roughness Ra value of the workpiece to produce a matt or diffusely reflective surface of the workpiece to achieve the purpose of finishing.

 When the fog cannon machine is working, the water is atomized into particles of the same size as the dust through high pressure, so that the dust particles in the air and the water mist are connected to each other. After the accumulation increases, the dust particles in the air sink by relying on its own gravity. The purpose of dust reduction.

When the city encounters smog and the PM2.5 in the air is seriously overvalued, it can decompose and desalinate the concentration of particles in the air, and quickly force the polluted particles and dust floating in the air to fall on the ground, thereby purifying the air.

At the same time, as the dry dust particles in the air sink, space is reserved for water molecules, which can effectively increase the air humidity and absorb the latent heat of the air to have a good cooling effect.

Under normal circumstances, the finer the water mist sprayed by the mist cannon machine, the easier it is to adsorb fine particles. At the same time, the water mist will go with the wind, and there will be no “mud” on the ground.

• 

• 

Main Features of  Fog Cannon Machine:

1. Long-range, wide-coverage, and high working efficiency;
2. It can achieve precise spraying and the sprayed mist particles are small, which can quicklysuppress the dust;
3. The supporting power is flexible, which can be used for both three-phase 380V city power and diesel generator set;
4. It can be fixedly installed on the platform where the concrete is poured, and can also be installed on the transportation vehicle with the diesel generator set;
5. Flexible operation, remote control or manual control, and can adjust the horizontal rotation and spray angle at will, safe and reliable use;
6. Compared with otherdust suppression spraying equipment, the water consumption can be saved by 70% -80%, and the water mist coverage area is much larger than other dust suppression spraying equipment;
7. It can be configured according to the customer’s actual requirements.

• 

• 

Dust Suppression Cannon range of applications :

It can be used for cooling in urban areas, and can be used for dust suppression in areas with serious dust pollution such as construction sites, breeding farms, green areas, and chemical plants to purify the air. It can also be transformed into a disinfection vehicle. For example, in the fight against the epidemic, the bid-winning environmental water truck shuttled through different streets for virus elimination operations.

The fog cannon installed on the environmental sprinkler has the advantages of strong wind power, special environmental protection, long range, cold-rolled steel plate, 350° arbitrary adjustment, efficient dust removal, full fog guidance, and one-button remote control.

The operation design is also more user-friendly. It adopts manual control and remote control compatible design, which means that it can be operated in the cab or remotely operated outside the car. It is safe, reliable, flexible and convenient to use.

• 

• 

Fog cannon unit components

1. Nozzle: atomize the water into suitable dust-reducing water mist particles, thereby speeding up the dust-reducing speed and making the spraying more uniform.
2. Water pump: The heart of the dust removal fog gun machine, which mainly realizes the delivery of water from the water tank to the nozzle, and atomizes the water through high-pressure water flow.
3. Fan: produces high-speed airflow. When the fan wheel rotates, the high-speed airflow is ejected from the air outlet to blow the fine droplets formed by the nozzle atomization to the required area. Generally, centrifugal fans with convenient driving, high wind pressure, high wind speed and strong air penetration are adopted. The blades adopt backward curved blades with higher total pressure efficiency, which can ensure the spray range and improve the atomization effect.
4. Turning and positioning device: the outlet direction of the air outlet pipe can be rotated 360°in the horizontal plane (generally, it can only be rotated at 350°in actual operation) to adapt to the change of the operating wind direction, and there is another setting in the air outlet pipe A steering positioning device to adjust the elevation angle of the air outlet.

Low-capacity disinfection fog sprayer machine: This fog sprayer machine is professionally used for spray disinfection in confined areas and buildings. The high-performance pure copper motor is used inside the equipment, which can provide super wind power, ensure finer atomization, wider spray area, and adjust the spray volume according to the spray demand. It is an ideal electric fog sprayer machine with excellent performance and convenient use. It is also mentioned that “choose peracetic acid, chlorine-containing disinfectants, chlorine dioxide, hydrogen peroxide and other disinfectants under unmanned conditions, and use ultra-low volume spray methods for disinfection.” It is widely used in hospitals, schools, government agencies, enterprises and institutions, office buildings, offices, restaurants, homes, warehouses and other public places.

• 

• 

Advantages of fog sprayer machine:

The device is small and easy to carry. The operation is simple, and it can be carried by hand or carried on the shoulder. The equipment hose can swing 180 degrees for disinfection, which is convenient for spraying in small spaces, gaps, sewers, ceilings, etc. The spray volume can be adjusted at the hose, which can be adjusted according to the actual use.

The use of agents during disinfection:

When disinfecting, you can add a disinfectant in the equipment, and pay attention to the following: 1. You can add chlorine dioxide effervescent tablets: chlorine dioxide disinfectant (tablet), non-medicine, not oral. Please refer to the actual packaging parameters for specifications and content; it can be used indoors and in various public places; refer to the instruction manual for usage. 2. When 84 disinfectant is added to the equipment (not recommended). It can be disinfected and used in an open area that is not afraid of corrosion; it must be diluted in strict accordance with the instructions for use, and pay attention to the scope of use.

• 

• 

Why choose an fog sprayer machine for disinfection?

In the epidemic season of infectious diseases, necessary disinfection methods must be adopted to effectively control the spread of diseases. However, most traditional disinfection methods use manual spraying of disinfectant, which not only cannot achieve full coverage, but also takes time and effort. Labor-intensive and difficult to operate, it is difficult to ensure uniform spraying, and it is difficult to achieve a better disinfection method. However, the indoor fog sprayer machine can perform 360-degree disinfection without dead corners, and spray the disinfectant to any corner of the holiday by using ultrasonic waves to achieve the effect of disinfection and sterilization. It is colorless, tasteless, and irritating to achieve efficient disinfection.

 Nowadays, the use of line marking machines has greatly increased the construction speed of road marking. The original manual construction is not only inefficient, but also due to the influence of weather and other factors, there may be mistakes and failures. Compared with the current construction workers, they can draw beautiful and regular road markings machine more conveniently with the help of the power of the marking machine. So when it comes to this, how do construction workers use the road marking machine products?

• 

• 

 1. Vehicle-mounted road marking machine: It is used in large-scale projects and long-distance construction marking. Operators need to understand driving skills, drive walking, and save time and effort.

2. Self-service line marking machine: hand-driven, the machine itself has a drive device, self-walking, without manual assistance, used in large and medium-sized projects, short-distance construction with vehicle-mounted operation, dexterous and easy to operate.

 3. Hand-pushed line marking machine: hand-assisted power-assisted form, manual rotary roller skating device, requiring manual walking, used in small projects, short-distance construction, convenient activities and flexible operation.

• 

• 

1. The cold spray road marking machine is currently the most used marking machine. According to the operation mode, it can be divided into two types: hand-push type and vehicle-mounted type. The former is mainly used for small-scale operations such as pedestrian crossing lines, parking azimuth lines, and parking lines; the latter is a self-propelled line marking machine modified with a special chassis, which has fast construction speed and flexibility, and can be used for large-scale marking construction. It is mostly used for high-speed Road marking. According to the spraying method, the cold spray line marking machine can be divided into low pressure air marking machine and high pressure airless spray marking machine. The low-pressure air road marking machine uses low-pressure air to generate negative pressure in front of the nozzle to suck out the paint in the container, atomize the paint, and spray it on the road surface to form a marking coating. The air spray method can make the paint atomize fine , But there is air rebound, the paint is scattered seriously, the marking line has burrs, and only low-viscosity paint can be sprayed. Due to many defects, air spraying has been replaced by high-pressure airless spray marking machines in the marking construction of our country. High-pressure airless spraying line marking machine, the spraying effect is good, although the atomization is not as fine as air spraying, there is no air rebound, the marking line is neat and full, and the spraying is strong, the adhesion is good, and it can spray high-viscosity coatings. The life of wire coating is significantly longer than airless spraying. High pressure airless spray marking machine can be divided into two types: diaphragm type and plunger pump type.

• 

2. The thermoplastic road marking machine is gradually developed and improved with the development of thermoplastic coatings. It is a highly automated machine. There are various types of thermoplastic coating construction machinery, with different styles. Generally speaking, they can be divided into four categories: coating preheating kettle, manual coating vehicle, large motorized coating vehicle, and supporting construction machinery. The function of the paint preheating kettle is to melt the powder coating into a liquid of a certain temperature, and then flow it into the construction vehicle for construction. Manual coating vehicles have an absolute advantage in the construction of hot melt coatings. About 80% of the coatings are applied by this vehicle. It is used to paint solid and discontinuous lines such as road lines, zebra crossings, and center lines. The large motorized coating vehicle is a thermoplastic road marking machinethat integrates the hot-melt kettle and spraying equipment. It has the advantages of labor-saving construction, high efficiency and strong adaptability.

Meltblown cloth is mainly polypropylene, in addition to polyurethane, polylactic acid, the fiber diameter can reach 1 to 5 microns. It has good filtering, shielding, thermal insulation and oil absorption. It can be used on medical and health cloths, such as surgical gowns, protective clothing, disinfection wraps, masks, diapers, sanitary napkins, etc. It also has outstanding performance in industry, and can be used as filter materials, insulating materials, cement packaging bags, and geotextiles. , Covering cloth, etc.

The main principle of meltblown cloth equipment is the use of melt-blown method, which is a method of blowing polymer melt by high-temperature and high-speed airflow so that it can be stretched quickly to prepare fibers. After the polymer chips are heated and pressurized by the screw extruder, they melt and then pass through the melt distribution channel to the spinneret hole in the front of the nozzle. After being extruded, it is stretched by two convergent high-speed and high-temperature air streams, and the thinned fibers are cooled and solidified on the mesh device, so that the meltblown nonwoven fabric is formed.

• 

• 

The equipment for the production of meltblown cloth is a meltblown machine or a melt blown cloth production line. The melt blown cloth production line consists of the following parts:

1. Screw extruder: melt the slices.

2. Metering pump: Control the output and the fineness of the fiber to continuously deliver the melt to the spinneret.

3. Melt filter: filter the impurities in the melt.

4. Conveying net curtain: make melt blown fiber evenly received and spread on the net

5. Spinning box: After the fiber is ejected, the high-speed hot air is used for air-stretching immediately to blow off the fiber and become superfine fiber.

6. Feeding system: It is composed of 3 measuring hoppers, which are used to measure white slices, masterbatch and additives.

7. Hot air blower and heater: provide the temperature and pressure of the hot air used in the spinning air stretching, use electric heating, and consume a lot of power.

8. Coiling machine: adopts fully automatic coiling to pack melt blown cloth into rolls.

• 

• 

Why can meltblown nonwoven prevent viruses?

 In fact, meltblown nonwoven is the main raw material for the three types of masks, N90/N95/N99. meltblown nonwoven fabric is made of polypropylene as the main raw material. Because the fiber diameter of polypropylene is small, the produced meltblown nonwoven fabric can play a very good filtering role.

1. The fiber has a small diameter, which is smaller than many viruses, and can act like a sieve to filter the viruses out.

2. With static electricity, propylene and other small molecule polymer fibers are easy to charge static electricity when combined together. Static electricity has a strong adsorption capacity to prevent viruses from entering, similar to electrostatic dust removal.

 3. The fiber is thin, and the principle of the thin fiber is similar to the first one. Small fibers can block the entry of viruses.

 Intelligent atomization disinfection door, intelligent human body temperature measurement and face recognition atomization disinfection door, convenient to use, time-saving, labor-saving, and resource-saving, 360 degrees all-round sterilization, atomization size can be adjusted, disinfection solution ratio manufacturers have Guidance is a relatively comprehensive disinfection equipment in the current environment.

• 

• 

Features of disinfection door for sale:

1. Infrared human body temperature measurement. Acousto-optic alarm: using high-precision infrared spectrum sensor, factory calibrated by black body radiation source, can measure body temperature from long distance without contact, which can effectively avoid being infected, voice prompt for normal body temperature, overheating alarm voice prompt .

2. Smart display: The body temperature display can adjust the temperature difference of the seasons, and can display the body temperature more accurately.

3. Automatically sense the ultrasonic wave to produce the fog, and the person walks and stops: a microwave sensor is installed at the equipment port, and it can sense that someone enters, and it starts the fog machine by itself to spray disinfectant around the human body. After the person leaves, it automatically stops to avoid liquid waste.

4. Balanced spray box, thin throttling and no damage to the face: only the disinfection door adopts a balanced spray method, not directly spraying the human face, and the mist is more refined without causing waste.

5. Pass-through passage: direct pass-through passage, convenient for the elderly, children, wheelchairs and travellers to come and go.

6. Split structure, quick assembly, convenient transportation, saving freight; professional installation and commissioning are guided by professionals, simple operation, easy to learn and understand.

• 

• 

Disinfection Door for Sale

Disinfection door refers to a compulsory sanitation and disinfection aisle set at the entrance of public places, food factories, shopping mall entrances, schools, hospitals and other areas that require high sanitary conditions, and a machine for compulsory disinfection of people or things passing by.

The disinfection door should be installed in an aisle or room, and all people or things entering the factory area must pass through this channel. Others have no entrances. Generally, three methods of ultraviolet light, spray, and ozone are used. Because ultraviolet rays and ozone have strong harm to human health, spray disinfection methods are generally used now.

• 

• 

Spray is divided into three methods: low pressure spray, high pressure spray, and ultra-sonic spray. These three methods generally require automatic induction devices. Disinfection door manufacturers can automatically disinfect after reaching the disinfection door without manual control; low pressure spray and high pressure Spraying needs to be laid on the floor of the disinfection room with absorbent materials with good water absorption, such as carpets, sponge mats, etc., to disinfect people passing by in all directions, but generally do not use organic matter, such as sacks, sawdust, etc., to prevent contamination And the active ingredient of disinfectant. Ultrasonic spray disinfection machine has very small mist particles, and there is basically no discomfort for personnel disinfection, low cost, and not easy to damage. In addition, an electronic lock is installed. The electronic lock cannot be opened during disinfection. It can only be opened after the disinfection time is reached. The mandatory disinfection time is fixed to achieve the disinfection effect.

 Fully automatic plastic film disposable glove machine production line. During the production process, finished products and waste materials are automatically separated, so that the originals can be counted and the originals are sent out, so that workers can easily bag and pack and pack. A PE Glove making machine only needs one person to operate Basically continuous work, the speed can reach more than 100 per minute, with the advantages of long continuous working time, high output and low labor. This equipment can also be equipped with film finger cots and various special-shaped plastic products according to customer needs.

• 

Disposable PE gloves are processed from 100% pure virgin PE. It is mainly used in the operation industry of hygiene, beauty salon and food processing. It is an indispensable product for hand protection and avoiding infection. When used in housework, it can isolate oily dirt, effectively avoid skin infection, detergent corrosion, and keep skin delicate. The product has good anti-static properties, does not contain protein allergens, is comfortable to wear, and is more flexible in operation. The product is widely used in many fields, with high quality and low price. It has no impact on the hand, it is resistant to cutting, puncture, and corrosion of chemical solvents. It is the ideal choice for enterprises and individuals as protection. It fits the shape of the hand and is comfortable to wear!

• 

• 

Features of PE glove making machine:

1. Independent research and development design, product quality is guaranteed;

2 Adopt imported piezoelectric chip, strong and stable output; frequency conversion motor control, precise operation;

3. The flower wheel is made of gold steel material, the welding head is wear-resistant and has a long service life;

4. The flower wheel is easy to disassemble and assemble, and the flower wheel of various graphics can be replaced according to customer needs; eccentric adjustment, flexible, fast, and high level;

5. The working speed is fast, the product effect is good, and the quality is guaranteed;

6. A full set of high-quality imported components are assembled with stable performance;

7. The use of ultrasonic and special steel wheel processing, does not damage the edge of the cloth, no burrs;

8. No need to preheat during work, and can be operated continuously.

• 

• 

PE Gloce Making Machine of Usages:

1.That equipment design basis on multifunction, according to the customer different demands which suitable produce glove, shoe cover, apron, sleeve cover, desk cover, and other medical products.

2.These products could be used in all hotels, hospitals, homes, paint protect, beauty salons, garden working, clear working, and so on.

3.It is ideal machinery to produce HDPE, LDPE material, the restaurant like KFC need this plastic glove very urgently.