Cracks are the most common, most prone, and one of the earliest road diseases among all types of road damage. It accompanies the entire service life of the road and increases with the age of the road. After cracks appear on the asphalt pavement, the pavement will soak the pavement structure layer underwater, reducing the bearing capacity of the pavement. In order to prevent serious damage to the asphalt pavement and extend the life of the road, it is necessary to grout the asphalt pavement in time. The pavement equipment used at this time is the asphalt pavement crack filling machine.

• 

• 

First, understand the role and classification of asphalt crack filler machine. Asphalt crack filling machine is used for joint filling of asphalt or cement road cracks. According to the specifications, it is divided into 60 liters small crack filling machine, 100 liters asphalt crack filler machine, 200 liters asphalt crack sealing machine, 350 liters asphalt sealing equipment, 500 liters filling machine, etc. According to the walking mode, it is divided into hand-push type, Trailer type, towed type, car type points. YG Machinery continues to research and develop and constantly introduces new products, with a full range of asphalt crack filler machines, low prices, and reliable quality.

The 60-liter small asphalt crack filler machine adopts a liquefied gas heating system and heat-conducting oil circulation to quickly melt the asphalt or joint filling glue. The pressure of the asphalt pump is discharged from the discharge port to achieve the effect of crack treatment. Through the pressure injection type grouting, the material and the joint wall are tightly combined, and the flexible universal wheel is turned to track the cracks so that the grouting effect is beautiful. As the joint filling material uses asphalt or joint filling glue, it is easy to solidify when the temperature is low. The crack filling machine is equipped with a generator set to provide the power of the whole machine. Ensure smooth discharge;

• 

• 

The 100-liter crack filling machine is mainly operated by hand-push type and self-propelled hand-held filling pipe, and it is heated by imported diesel burner. When working, first add asphalt or joint glue in the material box, start the generator to supply power, turn on the heat transfer oil pump switch, the burner switch, and the discharge pipe heating switch in turn; adjust the automatic temperature control system to the same temperature as the material, pass the diesel The burner automatically heats the heat transfer oil in the melt box and starts to heat up (the drag type is forced circulation) to melt the material, and the temperature is controlled by the automatic control system. The dissolution time is about 30-40 minutes. Work can be performed after the material has melted and the temperature of the discharge tube is reached. Hand-hold the grouting pipe to grouting the normal crack. The discharge flow of the asphalt pump is adjustable. Add materials at any time during the work process to ensure the continuity of work;

• 

• 

Traction walking pavement crack filling machine, which continuously injects the heated and melted rubber asphalt-based sealing material into the cleaned gap through a separate heating hose to complete the sealing treatment of cracks and diseases. The construction effect is good and the service life is long.

Air compressor is the main body that provides air source power for pneumatic water well drilling rig, mainly to provide a certain air volume and pressure to the down-the-hole impactor. The optional air compressor for pneumatic water well drilling rig requires that the air compressor must have the ability to work continuously, and the equipment must be simple to maintain and can meet the requirements of field construction operations.

The construction site of the YG water well drilling equipment is affected by factors such as the length of the gas pipeline line distance, the size of the pipeline joint connection, and the leakage of the formation cracks in the borehole, so there should be room for theoretical calculations. When the capacity of the existing air compressor cannot be satisfied, it should be overcome from the aspects of drilling tool matching, such as thickening the drill pipe, supporting the missing formation, and tube drilling tool. For large-diameter water wells and deep geothermal wells, especially when there is a large back pressure in the water-rich aquifer, if the required output air pressure exceeds the rated value of the air compressor, a booster is needed. If a single air compressor cannot meet the demand, it is necessary to equip multiple air compressors and boosters according to the well water level and well diameter. When selecting an air compressor for water well drilling rigs, try to choose an air compressor with greater air volume and air pressure capability.

• 

• 

The following aspects should be considered when selecting an air compressor for a water drilling rig:

1. Consider the displacement and pressure of the air compressor

The air displacement is one of the main parameters of an air compressor. The air volume of the air compressor should be selected to match the required air displacement, and a 10% margin should be left. If the air consumption is large and the air compressor has a small exhaust volume, the air-driven tool will greatly reduce the exhaust pressure of the air compressor, and the air-driven tool cannot be driven.

• 

• 

2. Consider the energy efficiency rating of the air compressor

The formulation of national energy efficiency standards is based on specific power. The value of this value as an evaluation criterion is more in line with the actual use of customers. The smaller the unit input specific power value, the more power the machine will save. Unit input specific power = unit input total power (including fan power consumption + system loss) / volume flow.

3. Consider the safety of air compressor operation

The air compressor is a kind of machine that works under pressure. It is accompanied by temperature rise and pressure during work. The safety of its operation must be put first. Usually, the product quality assurance system of the certified manufacturer is complete, and there will be no major quality problems. Even if there are some problems, the manufacturer will be responsible for the three guarantees.

When choosing air compressors for a water drilling rig, they are very confused. Many air compressor sales staff boast about the product quality but do not know the depth of various types of air compressors that are actually suitable for drilling wells; too small selection may lead to air pressure The machine has been in a loaded state for a long time or is not using enough air; excessive selection causes waste.

What is a fog sprayer machine? How does it work?

Fog sprayer machine is mainly composed of medicine box, pressure pump, motor, drain pipe, fan, high-pressure nozzle, intelligent control switch, trolley, swing mechanism, etc. It mainly uses a pulse jet engine to make medicine into smoke or water mist. It has penetrability and diffusion, strong adhesion, and can achieve the functions of sterilization, disinfection, and deworming.

• 

• 

When the disinfection mist machine is working, the high-temperature and high-pressure airflow generated by the pulse engine at a running speed of 60 times per second is ejected from the nozzle port at high speed. After the medicine valve is opened, the air pressure in the medicine box the medicine is hydraulically pressed into the explosion tube, mixed with the high-temperature and high-speed airflow, When it encounters the liquid medicine, it will be crushed into ultrafine particles and cooled to form a smoke-like spray from the nozzle mouth at high speed. It generates a low-pressure large airflow, blows the nozzle smoke into the distance, and quickly diffuses into the air. When the fog particles formed to adhere to the object, it naturally plays a role in prevention or sterilization.

• 

• 

What are the advantages of a disinfection mist machine?

1. The effect is fast, the fine particles generated during sandblasting and spraying have strong penetrating power, and can directly pass through the plant canopy to kill insects, kill bacteria, and leave no dead ends.

2. Strong adhesion ability, able to resist the erosion of rainwater, and it can work normally in rainy and rainy weather.

3. Wide area without dead corners, when disinfection and sterilization and deworming, strong penetration, comprehensive and efficient, no dead corners.

4. Convenient operation, time-saving and labor-saving, simple operation, labor-saving, low consumption of liquid medicine, and high working efficiency.

• 

• 

Disinfection Maist Machine manufacturer

The fog sprayer machine to its simple and convenient operation, the sprayer has a wide range of applications, high efficiency, good diffusion, and strong adhesion. Well received by the majority of customers. YG Machinery is a professional manufacturer of protective equipment. It sells various protective disinfection equipment, such as air disinfection machine, fogging sanitizer machine, disinfection robot, professional backpack sprayer, and so on.

 If you do not pay attention to the following items, it may cause accidents on the road marking machine, reducing work efficiency and delaying the construction period.

1.The pavement of the marking line should be clean and dry, without loose particles, dust, asphalt, oil, or other harmful substances.

2.Spraying work should be carried out during sunny days, and it should be stopped in case of inclement weather.

3.The paint is put into the heat preservation can during the machine working, the material is kept flowing, and then the liquid paint is introduced into the marking bucket.

4.The scribing bucket should be placed on the road surface. Because there is a certain gap between the bucket and ground, when the machine moves straight ahead, paint automatically flows out to form a neat line. The marking lines are straight, smooth, even, and beautiful.

• 

• 

How to Solve the Common Problems of Road Marking Machine?

1.Spraying gun of marking machine gets blocked.

This situation is more common, we should pay attention to the cleaning of the spray gun. If the line marking machine has a problem with the gun blockage, we can remove the nozzle of the spray gun, soak with thinned material for 3 minutes and clean with a brush. If this way can’t solve the blockage problem, you should release the material inside, and then spray the thinner out with a spray gun.

• 

• 

2.Mark line is not straight.

If this problem occurs, loosen the fixing screw on the orienter and push the machine 5 meters without any difficulty. When you feel it is straight, tighten the two fixing screws a little and try again.

3.The length of the line is not the same.

Check if encoder connection, line type control cable, line type circuit board, PLC connection line is intact. If there is a problem, it should be repaired or replaced.

Check if the controller’s line is intact. If it is not connected properly, reconnect it. If the line is damaged, replace the line. Check if the spray gun is closed smoothly, whether the needle gap is adjusted, and the clearance is 3 to 4 mm.

• 

• 

The automatic road marking machine in YG company uses specially manufactured high-precision cast iron marking equipment to ensure that the marking line is neat, uniform, and beautiful. The machine has the advantages of high performance, innovative tech, proven quality, very fuel efficiency, easy operation, and maintenance. There are many kinds of road marking machines, you should choose the right machine carefully for your pavement.

Road marking machine can be divided into thermoplastic marking machines, normal temperature marking machine, and cold coating marking machine according to the type of paint. Thermoplastic marking machines is often used for high-level highway markings, and normal temperature markings and cold-painting markings are more commonly used on urban roads and arterial roads. Before the construction of the thermoplastic marking machines, it is necessary to pour the hot-melt road special drawings into the machine, heat and stir to dissolve, and the temperature is best controlled between 180-270℃ (the paint is in powder state before heating). The composition of the hot-melt coating is a synthetic resin, which makes the coating have the characteristics of high adhesion to the ground in the dissolved state. In addition to the adhesion, the hot-melt marking also has the characteristics of abrasion resistance, short construction time, low cost, and environmental protection. This makes the thermoplastic marking machines the most widely used kind of marking.

• 

• 

Advantages of thermoplastic road marking machine

1. The thermoplastic road marking machine has high working efficiency and good performance. It is an efficient and economical marking form.
2. If you are working on an expressway, due to the large traffic volume and fast speed, the safety of the construction personnel is greater. The road closure for a long time will hinder the traffic. Choosing the hot melt line can not only improve construction efficiency but also reduce the road closure time.
3. The repair of thermoplastic road marking is simpler than other markings. If the road surface needs to be re-paved due to damage to the road surface, and the marking needs to be re-marked or re-marking, the hot-melt marking will be quite appropriate.
4. Thermoplastic road marking can adapt to low-temperature climates. For example, the winter in northern my country is relatively cold. Other markings will produce freezing and cracking, which will directly affect the life of the markings or cause the markings to fall off due to snow removal. thermoplastic road marking can avoid the adverse effects of weather or snow removal on markings.
5. The thermoplastic road marking machine is mainly composed of synthetic resin, which has stronger adhesion to the asphalt under heating, which greatly improves the service life and durability of the hot-melt marking.

Concrete road cutting machines are widely used in the cutting operations of asphalt, cement pavement, concrete products, stone, etc. in many industries such as municipal administration, construction, building materials, and airport construction. Concrete road cutting machines have good dynamic performance, extremely high work efficiency, and reliability, and road surface The cutting machine can be used for the soft and hard cutting of the transverse and longitudinal seams in the construction of cement roads. The road cutting machine can cut the damaged road surface or base layer during the repair of the road potholes. It can be used with the road breaker to complete the removal of the old road surface. The operation, the cutting depth of the road cutting machine is especially suitable for the deep cutting operation of airport runways and highway cement pavements.

The road cutting machine adopts a thickened frame and diamond saw blades. It is mainly used to cut the expansion joints of concrete roads. At the same time, it can cut and groove various specifications of concrete products, marble, and granite products. It is concrete road construction Construction machinery necessary for the project.

• 

• 

Features of concrete road cutting machine:

1. The product is powerful and easy to move;

2. The super rigid box frame guarantees the straight cut, resists warping and vibration; extends the service life of saws and blades;

3. The product design conforms to the principle of ergonomics, and the height of the handle can be adjusted according to the comfort of the human body. The depth of the cut can be adjusted by turning the crank;

4. The front-hinged and blade protection design is convenient for blade replacement;

5. The rust-free water tank provides suitable water flow and volume for the blades.

• 

• 

Pavement road cutting machine use:

1. Provide professional cutting for municipal construction re-election, road maintenance construction, airport road cutting, communication engineering burying, floor, driveway, and other field operations.

2. Changing different types of saw blades in use can effectively cut new and old concrete and asphalt roads, and can load water tanks for motorized cutting operations with water.

3. This machine is mainly used for cutting concrete, cement, floor, and stone pavement; for cutting pavement shrinkage joints or damaged pavement, its operation is simple, and it is more convenient when there is no power supply.

Intelligent temperature measurement atomization disinfection door adopts high-precision long-distance infrared temperature measurement sensor, sensing long-distance 0-200cm (good distance within 100cm) with high precision and high resolution. The measurement error is ±0.5℃ at room temperature, and the resolution is 0.1℃. The initial temperature setting value is 37.3℃. When the disinfection door is working, the actual body temperature detected will be displayed and the voice “normal body temperature, please pass” will be issued. When the temperature exceeds 37.3℃, the voice “body temperature is too high, no passage” will be issued and an alarm will be issued. It is not displayed when it passes or fails to detect at 35°C. After the pedestrian measures the temperature, he can reach under the disinfection machine and spray a rubbing disinfectant after the automatic induction, so as to achieve the disinfection effect and prevent the virus from spreading everywhere.

• 

• 

Upmarket human disinfection gate for sale

At the same time, the disinfection door can add human body temperature alarm and thermal imaging temperature detector to detect the temperature of personnel. In addition, the disinfection solvent is food-grad. And non-contact disinfection is adopted for passing persons and articles. The overall stainless steel material of the disinfection gate is resistant to corrosion and deformation. Lightly portable, 220v voltage, easy to switch. Simple operation, economical and environmental protection. If you purchase an intelligent disinfection temperature measuring door, you can use it directly. So as to save labor and time. Human disinfection gate is suitable for schools, hotels, stations, shopping malls and other crowded places.

• 

• 

Advantages of disinfection&temperature measuring door

Human disinfection gate is used in shopping malls, factories, farm entrances, etc. It can quickly kill external viruses and bacteria carried by the human body. Thereby blocking the spread of external diseases.

In general, the disinfection door can be completely diffused in 30 seconds. And the disinfection time only takes 5-15 seconds, which is not harmful to human health. It is safer to use. Now contact disinfection gate manufacturers freely. The new disinfection tunnel fogging effect is good, the mist flow crosses in multiple directions. Adhesion is strong. Disinfection and sterilization effect is remarkable. The YG supplier’s auto sanitizing gate efficiency is high.

YG Wet Wipe Machine Manufacturer

YG company specializes in manufacturing wet wipes machine. We have a series of wet wipes production line with different specifications. For example, fully automatic high-speed wet tissue making machine. Auto-splicing high-speed wet wipes manufacturing machine. Wet tissue folding machine. Wet wipes packing machine. According to the number of wet wipes per pack, we have single sachet wet wipes machine, 5-30pcs wet wipes machinery, 30-120pcs wipes making machine. According to the degree of automation, there is fully automatic wet tissue making machine&semi-auto wet wipes production line. If you are looking for baby wipes machine or a wet tissue paper making machine for adults use, YG will be your ideal partner. Please feel free to leave your requirements.

• 

• 

 wet wipe making machine for sale

The wet wipe production line is the special equipment for producing multi-piece wet tissue paper (multi-piece/removable). After folding, humidifying, cutting, stacking, and counting, the product automatically enters the packaging machine for coding, opening, and pasting. After making the bag and gusset, the package is a finished product. The whole process does not require manual labor, and all is a fully automatic production process that is safe and fast.

Adopt a servo drive PLC control system. It is composed of raw material unwinding device, tension device, folding device, automatic humidification system, automatic product counting and stacking arrangement, automatic labeling device, automatic punching device, automatic coding printing device, finished product slitting device, and other institutions.

The packaging machine adopts a reciprocating horizontal sealing device and is equipped with a mechanical gusset device. The relative position of opening, labeling, and horizontal sealing can be set on the touch screen with synchronization accuracy. The packaging film automatically opens the skylight, automatic coding, and can set the opening position. Automatic standard change can be realized. The machine body is covered with stainless steel. The main components are made of national standard food grade 304 stainless steel. The product is hygienic and safe.

• 

• 

Features of the wet wipe machine:

1. The working principle of the equipment: automatic feeding → automatic slitting → automatic folding → automatic liquid filling → automatic cutting → automatic stacking → automatic counting → automatic product output, and the entire line is automatically completed.

2. The equipment is equipped with two sets of 1.2-meter online slitting devices, the slitting knife can automatically lift up and left to move freely to adjust the product slitting width, and is equipped with pneumatic automatic feeding, air expansion shaft unwinding, and pneumatic wide belt synchronous conveying device.

3. The equipment is equipped with a complete set of folding devices, which can be folded in N and in half, and equipped with multiple adjustment devices to ensure that the product size is accurate and does not rise.

4. The entire conveying system of the equipment adopts imported conveyor belts, which is firm, durable, and pollution-free; it is equipped with a complete set of the automatic liquid adding system including stainless steel mixing tank with disinfectant.

5. The equipment adopts an imported PLC program programming control system, computer touch screen display, frequency conversion, and joint control.

6. The wiring specifications of the electrical parts are reasonable, beautiful, elegant, and easy to operate.

7. The steel frame of the whole machine is welded by high-quality 45# channel steel in the national standard, and the surface is treated with anti-rust spray paint. The screws that are easy to affect the finished product are made of stainless steel. Simple operation, beautiful appearance, stable operation, it is the best choice for the production of non-woven wipes!

 Core drilling rigs are deep-hole drilling equipment for geological prospecting, hydrological water wells, coal field geological exploration, oil and natural gas exploration and development and other fields. This drilling rig combines the advantages of a vertical shaft hydraulic drilling rig, which can be used for small-diameter diamond drilling, large-diameter drilling, vertical drilling, and diagonal drilling. It is an ideal equipment for deep-hole geological exploration drilling.

• 

• 

Main features of diamond core drilling machine

1. The vertical shaft speed is high and the speed range is wide.

2. The elevator is equipped with a water brake, and the lowering of the drilling tool is stable and safe.

3. Oil-soaked clutch, stable starting, with brake device.

4. The hydraulic operating system has reserved special valve ports, which can be used when equipped with a pipe screwing machine.

5. The drilling rig moves forward and backward in a large distance, which is convenient for hole operation.

6. The diameter of the vertical shaft through hole is large, which can meet the requirements of various drilling processes.

7. The whole machine has moderate weight and good disassembly performance, which is convenient for transportation and relocation.

• 

• 

Precautions for core drilling rig operation

1. The core drilling machine is operated by a person who is in good health, has the corresponding knowledge, and has an operation certificate;

2. Core drilling equipment must not be operated without being taken care of;

3. When the hydraulic core drill does not use the hydraulic system, the switching valve of the drilling rig should be placed at the “oil pump unloading” position;

4. When pulling the shifting handle, first cut off the clutch, wait for the gear to stop rotating, then change gears to avoid damage to the gear, and pay attention to fix the handle;

5. The clutch should be operated smoothly when closing the clutch, and it is forbidden to open and close suddenly to avoid the clutch in a half-engaged state;

6. The lifting brake belt and the lowering belt of the hoist do not act at the same time. When lifting the drilling tool, the two handles should be held tightly at the same time for coordination at any time;

7. When lifting and hoisting, do not overload work;

8. When the brake band friction sheet is hot and smokes, it needs to be cooled for a while before use;

9. Move the core drilling rig to the front position and tighten the lock nuts of the front and rear pressure plates before drilling or lifting is allowed;

10. After the chuck suddenly loses pressure due to an accident (such as loss of power, oil pump failure, or other mechanical hydraulic accidents, etc.), the drill pipe or drilling tool should be jammed in time;

11. Pay attention to the working conditions of each pressure gauge at all times during operation, and deal with it in time if there is any abnormality;

12. Always pay attention to whether there are abnormal noises or high temperatures in various moving parts; problems should be dealt with immediately.

Traffic markings on highways play a vital role in orderly appearance. How are these markings made? This requires good equipment, that is, highway marking equipment. There are many types of highway road marking equipment. It is inevitable to be entangled when choosing. Which one is better?

Road traffic markings are mainly set on the road surface, subject to sun, rain, wind, snow, and freezing, and impact and abrasion from vehicles, so there are strict requirements for its performance. First, it requires a short drying time and simple operation to reduce traffic interference; secondly, it requires strong reflection, bright colors, and strong reflectivity, so that it has good visibility during the day and night; it should have skid resistance and wear resistance to ensure driving safety and longevity.

• 

• 

The advantages of thermoplastic road marking machine are as follows:

1. Material barrel: Double-layer stainless steel heat preservation and heating barrel, capacity 100kg, plug-in manual stirring device, detachable device.

2. Glass beads and microbead spreader: synchronous clutch spreading, equipped with speed-regulating gear shifting device.

3. Scribing bucket: made of high-precision ultra-thin material, scraper structure, standard configuration 150mm.

4. Floor knife: hard alloy, equipped with an eccentric sleeve device, which can adjust the thickness of the marking line: 1-2.5mm.

5. Rubber wheels: aluminum alloy wheels, heat-resistant rubber characteristics, make the car body move in a straight line.

• 

• 

The operation method of thermoplastic road marking machine

1. Make all preparations before construction, and check whether the bolts at each connection part are loose, whether the liquefied gas pipeline of the heating system is well connected, and whether the switches are in the correct position.

2. Open the liquefied gas tank, ignite the gas, preheat the mixing bucket marking bucket, clean the marking bucket, and at the same time add lubricating oil to lubricate all parts, and then put the heated paint into the marking machine mixing bucket in.

3. The paint in the mixing tank needs to be stirred frequently to avoid precipitation or burning.

4. Align the pointer of the marking machine with the placed reference line, position the rear wheel, lift the hopper lever, lower the hopper, press down the lever, and open the glass bead spreader (that is, open the hand push handle of the marking machine Side handle), you can do cart work.

5. After the operation is completed, lift the hopper control lever, close the marking hopper, place the hopper on the hopper support frame, and close the glass bead spreader at the same time. It can be operated continuously after feeding.