With the continuous development of industry, the requirements for using equipment are getting higher and higher. Coupled with the increasingly serious environmental pollution, haze and sandy weather are often accompanied, and people’s health is seriously threatened. This kind of weather is mostly caused by improper handling of industrial waste. The appearance of fog cannons machine greatly restricts the haze and dust. It plays an important role in promoting safe production, protecting the health of employees, and maintaining environmental sanitation. Fog cannon machine has now become a practical tool for reducing haze.

• 

• 

The atomization principle of the mist cannon:

The atomization principle of the mist cannon is to use the high-speed airflow generated by the high-pressure centrifugal fan to forcefully impact the liquid medicine and break it into small droplets. At the same time, it is further atomized the high-speed surging airflow, and then the airflow from the air outlet The atomized droplets are blown far away and directed towards the target. So as to achieve the effect of dust reduction, obviously, in addition to wind factors, the degree of atomization of the liquid is directly related to its surface tension and viscosity.

• 

• 

The function of the dust machine:

The dust machine has strong power, large air volume, long range, wide coverage, small mist particles, and can achieve precise spray; the sprayed airflow can effectively turn the plant leaves, so that the front and back sides of the plant can receive medicine, and have a better effect on objects. Strong penetrating power and adhesive force of liquid medicine, can effectively save the amount of medicine and reduce pollution; high work efficiency, wide application range, fast spraying speed, and spray while driving

• 

• 

Application scope of dust suppression cannon:

Dust suppression cannon are widely used in municipal gardens, green belts, orchards, etc. to spray pesticides, mines, coal storage yards, open storage yards, open operation dust control, environmental protection industries, closed coal, ore storage yards, truck discharge ports, machinery Control of dust pollution in local operations; control of coke, coal dust pollution in coal washing plants, ports, steel mill dust control projects, power plants, etc.

The shot blasting equipment automatically completes the target cleaning task, which not only reduces the labor intensity of manual cleaning, but also improves the cleaning effect and greatly improves work efficiency. At the same time, since the mechanical equipment is made of steel, the design is reasonable. Even if the equipment is in working condition for a long time, the equipment will not have serious failure and has a long service life. It is an indispensable cleaning equipment for the steel foundry industry.

• 

• 

Selection of shot blasting equipment model:

First choose the working mode of the shot blasting machine: drum shot blasting machine, crawler shot blasting machine, hook shot blasting machine (also divided into single hook shot blasting machine, double hook shot blasting machine), trolley type shot blasting machine Machine, through type shot blasting machine, hanging type through shot blasting machine.

After the working mode of the shot blasting machine is selected, it can be based on the product material, work requirements (deburring or descaling, beautification of the parts, whether they are afraid of collision), parts types (the largest part size and weight, the smallest part size and order Piece weight, main product size and weight) to purchase shot blasting machine.

• 

• 

The main factors that determine the quality of the shot blasting equipment are:

1. Whether the protective plate of shot blasting machine and shot blasting machine studio is wear-resistant, it is divided into high chromium and low chromium. The service life of high chromium is longer than that of low chromium.

2. Whether the dust removal structure of the shot blasting machine is reasonable.

3. The overall selection of equipment, transmission parts, manufacturing conditions, etc.

4. Whether the factory has the ability to produce for a long time, whether it has enough technical force to provide after-sales service, and whether it can supply spare parts for a long time.

• 

• 

How to distinguish the quality of floor shot blaster parts:

1. First observe the appearance of the product to see if its appearance is finely processed and the color is normal. If it is equipped with a genuine sample of shot blasting machine accessories, it can be checked against it. Generally, the surface of the imitation product is relatively rough and the color is not correct;

2. Special measurement tools can be used to analyze and compare products;

3. Check whether the casting meets the quenching requirements, whether there are cracks, whether the blade is smoothly rotated, and whether the angle of entering the sleeve meets the required angle. 

The small asphalt milling machine is a light ground construction machine. It is produced to make up for the shortcomings of the large asphalt milling machine. It is mainly used for roughening, leveling, and removing surface coverings on cement and asphalt surfaces. An excellent machine with high efficiency and low damage.

• 

• 

Product features of asphalt milling machine for sale:

1. The down-cutting milling mode and the design of adjustable milling depth ensure good milling quality.

2. The milling blade adopts the cutter shaft installation type, which is convenient to exchange.

3. The adjustable handle is convenient for operation and improves the operator’s work comfort.

4. There is a vacuum cleaner interface to provide a dust-free working environment;

5. High work efficiency, stable and reliable operation;

6. The milling depth can be adjusted and the depth is up to;

7. It is especially suitable for large-scale ground processing, with fast speed and high efficiency.

• 

• 

The use of a small asphalt milling machine:

1. The surface of the bridge deck is water-proof and shaved, and the beam surface of the high-speed railway box girder is flat and waterproof.

2. Asphalt pavement flooding, rutting, net cracks, and potholes are removed by milling. Clear the ice and snow from the bridge deck and road surface.

3. Lightly roughen the original old pavement before new asphalt concrete paving or cooperate with a large milling machine to complete the milling and roughening operations in the corner area and the densely-populated area.

4. Remove the ground coating, paint, and various traffic markings; when the ground is damaged or dirty and needs to be refurbished, remove the old floor surface.

5. Clear airport road markings, runway tire brake marks, etc., and regain a rough surface with a high friction coefficient.

6. Milling and leveling the over-elevation parts of cement asphalt pavement, highway bridge deck, bridge staggered platform, and epoxy wear-resistant ground.

7. For the construction of the micro-surface of the road, the original old pavement surface layer shall be milled and planned to prepare for the slurry seal.

 Water well drilling machine are necessary machinery for our drilling projects. For the drilling rig industry, there are many categories, regardless of which they belong to. For household water wells and water wells, they are nothing more than small water well drilling rigs. Because of their lightness and convenience It can be moved and can be drilled into rock, pebbles, granite and other hard layers. It is loved by the majority of friends. . Although it is a small water well drilling rigs, its efficiency is also very high.

When everyone uses a water well drilling machine, one point of concern is to want its construction efficiency to be high, so what factors can affect the construction efficiency of the water well drilling equipment?

• 

• 

1. In purchasing drilling rigs, choose a brand with reliable quality, stable performance, good reputation and convenient service. Quality water well drilling rigs are an important factor for the drilling rig construction team. With a drilling rig, a high-quality drill pipe must be equipped. The torque, pressure, and vibration output by the drilling rig all act on the drill pipe, so the quality of the drill pipe directly affects the production schedule. When configuring drill bits, it is necessary to replace different drill bits according to different geological structures, so as to improve construction efficiency.

• 

• 

 2. The second is team formation. A team is a group of people who collaborate to achieve goals. It is a community composed of employees and management. It uses the knowledge and skills of each member to work together to achieve problems. Working together to achieve the problem, Working together to achieve the problem, the common goal. Therefore, a construction team must be able to create excellent results and build a construction brand image. A good team is an intangible wealth.

• 

• 

3. Then there is the engineering survey. Due to the variable geology, the different pile diameters, pile lengths, and the geographical location of the project, the unit price and construction technology are different. Therefore, it is necessary to conduct on-site inspections of the specific conditions and detailed analysis through past experience. The results of the budget are generated to determine whether to contract this project; different geology has an important relationship with the efficiency of rig construction, construction difficulty, construction plan, mechanical wear, and material consumption. Therefore, detailed analysis should be carried out before signing the contract. Expense input, the geographical location of the project is different, resulting in different transportation costs and material prices, thus leading to changes in costs.

• 

• 

4. Other factors: seasonal and climate factors, hydrological factors, concrete factors, site factors, construction experience, etc. Only by doing a good job in construction preparations and working hard to reduce costs can the benefits be improved.

In the operation of the wet wipe machine, some things must be paid special attention to. This is very important to everyone. Many people are completely unaware of some specific things in the process of operating the equipment, so it will directly affect the final As a result, what are the issues that all of us need to pay attention to during the operation?

• 

• 

Learn the correct operation method:

As a professional operator, you must learn the correct operation method carefully. Only when we all can understand, what is the specific operation method? It can be guaranteed in the subsequent use process. Once many people don’t understand the operation method, they will be greatly affected during the entire application process. Therefore, you should understand the specific operation at normal times the way.

• 

• 

Is there an exception:

Usually, when using the wet wipe making machine, we also need to observe carefully to see if there is any abnormality in the equipment, and the work efficiency is nowhere. Under normal conditions, what are the specific methods of using the equipment? We can correctly understand these specific situations and see if there are other abnormal problems in the equipment, so as to help us solve them better. Pay close attention to these matters, and deal with problems in time.

• 

• 

Daily equipment inspection:

The equipment should be checked every day before starting, and some related cleaning should be done after use, and the condition of the wet wipe machine should be checked in time. If there are some problems, they need to be solved in time. There are no problems before it can be used again. Therefore, in the process of daily use, inspection and maintenance must be done well, so that the equipment can be used for a longer time and can effectively reduce other things.

When the wet wipe making machine fails, it must be dealt with in time. If you continue to work, it is likely to cause a more serious impact, and then there is no way to better use it. The first time a fault occurs is to check the faulty place and find a professional maintenance man for repair.

The most important thing for epidemic prevention and elimination is thorough disinfection. However, the disinfectant droplets sprayed by conventional disinfection equipment have large particles and poor adsorption, and the sprayed site is as wet as it has just been exposed to rain. In addition, in many cases, the corner gaps and the back of the object cannot be sprayed, making these blind areas a hidden danger.

• 

• 

The diameter of the mist droplets formed by the electrostatic backpack sprayer is only 40 microns, which is smaller than half of the diameter of the hair. Due to the electrostatic adsorption ability, when disinfecting one side of the object, the disinfectant droplets floating on the side and back of the object will also be affected by it. The electrostatic force produces an adsorption phenomenon, which achieves 360-degree enveloping disinfection with one spray side and multiple sides, and the disinfection is completed more thoroughly. The droplets carry static electricity to produce the adsorption, so that the disinfectant can be firmly attached to the target, and will not lose with gravity. The disinfectant left in the area sprayed once can be disinfected for a long time, saving the amount of medicine, and also greatly improving The effectiveness of disinfection.

• 

• 

Since the disinfectant droplets sprayed by the electrostatic backpack sprayer are small in diameter and charged with static electricity, they are not easy to fall and overcome gravity to suck back. It can accurately capture the suspended viruses in the air and block the hidden dangers of the spread of viruses floating in the air.

• 

• 

Common professional backpack sprayer failures and troubleshooting methods

1. Insufficient spray pressure and poor atomization: If the water inlet ball valve is set up by dirt, you can remove the water inlet valve and clean the dirt with a cloth; if the cup is damaged, you can replace it with a new one; if it is due to the connection part If the sealing ring is not installed, or the air is leaking due to the damage of the sealing ring, the sealing ring can be installed or replaced.
2. No fogging: If the oblique hole of the nozzle body is blocked by dirt, the oblique hole can be cleared; if the nozzle is blocked, the nozzle can be removed and cleaned. However, hard objects such as iron wire or copper needle can not be used to poke the nozzle to prevent The expansion of the holes makes the spray quality worse; if the filter in the casing is blocked or the water valve ball is set up, clean the filter and clean the dirt that has set up the ball.
3. The switch leaks or cannot be screwed: if the switch cap is not tightened, the switch cap should be tightened; if the gasket on the switch core is worn out, the washer should be replaced; the switch cannot be screwed because it has been placed for a long time or used for a long time, The switch core is stuck due to the corrosion of the agent. The parts should be removed and cleaned in kerosene or diesel; if it is difficult to remove, it can be soaked in kerosene for a period of time, and then it can be removed after disassembly. Do not hit with hard objects.
4. Water leakage in each connection part: if the joint is loose, the nut should be tightened; if the washer is not flat or damaged, the washer should be leveled or replaced; if the washer shrinks and hardens, it can be soaked in animal oil reuse.

The packaging is a necessary condition for products to enter the cycle, and the main means to achieve packaging is to use packaging machinery. With the development of the times and the advancement of technology, packaging machinery is becoming more and more important in the packaging field. With the continuous progress of the economic era, people’s quality of life is also continuously improved, and enterprises are also facing various risks and challenges. Therefore, continuous progress and innovation must be adopted in all aspects of work, especially in product packaging is also very important. So how to choose a wet wipe packaging machine?

• 

• 

1. The selection of the wet wipe packaging machine can be based on the permitted production, packaging speed, packaging weight, packaging size, and determined packaging. The length of the product and the analysis of its ingredients determine how many packages per minute can be achieved at the highest packaging design speed. The machine rolls and cuts the non-woven fabric into forming, folding, bagging, adding liquid, sealing, and outputting the finished product in one pass.
2. The choice of wet wipe packaging machine When purchasing a packaging machine, users are most concerned about price, not just price. If you only care about price, then you are a machine layman, and the packaging machine will definitely be fooled. If the packaging machine is cheap, then the machine parts and the internal principles of the machine are different, so its life span is different. Weipa Machinery Co., Ltd. pays attention to quality, only hard quality can go further.
3. The choice of wet wipe packaging machine The choice of packaging machinery must be a manufacturer with R&D capabilities, and the regulator is also guaranteed.

• 

• 

YG Machinery Co., Ltd. specializes in the production of wet wipe packaging machines. After years of development, the company has accumulated rich product experience. The company pays attention to quality. The wet wipe packaging machines produced are of good quality, large market share, and high customer recognition. Welcome to your choice.

Because meltblown nonwoven is an important material for the production of medical surgical masks and N95 masks, and it is the “heart” of masks. Taking a medical-surgical mask as an example, it is composed of a masked face and a tightening belt, and the mask face is divided into three layers: inner, middle, and outer. The inner layer is made of skin-friendly material: ordinary sanitary gauze or non-woven fabric; the middle layer is an isolation filter layer: ultra-fine polypropylene fiber meltblown material layer; the outer layer is a special material antibacterial layer: non-woven fabric or ultra-thin polypropylene melt Spray material layer.

• 

• 

Medical masks generally adopt a multi-layer structure, referred to as SMS structure: a single spunbond layer (S) on both sides, and a single or multiple meltblown layers (M) in the middle. The best material for the meltblown layer is melt Spray cloth. The main material that brings the virus filtering effect to the mask is the middle M layer-meltblown nonwoven fabric.

• 

• 

The meltblown nonwoven fabric is made of a polypropylene material called high melt index fiber. It is a kind of ultra-fine electrostatic fiber cloth, which can effectively use static electricity to absorb virus dust and droplets. This is also an important reason why masks can filter viruses. (If you don’t know whether your mask is anti-virus, just see if there is a meltblown cloth in the mask).

In fact, these three layers are all nonwoven fabrics, the raw materials are all polypropylene, but the production process is different. Among them, the fiber diameter of the spunbond layer on the inner and outer sides is relatively thick, about 20 microns; the fiber diameter of the meltblown layer in the middle is only 2 microns, which is made of a polypropylene material called high-melt fiber. It is fragile and cannot be washed with water or sprayed with alcohol. Even if it is wet and then dried, it will damage the fiber and cause loopholes. Viruses will pass through the loopholes, and the mask will lose its protective ability.

Air purifiers are also known as “air cleaners” and air fresheners, which can absorb, decompose or transform various air pollutants (generally including dust, pollen, peculiar smell, formaldehyde, and other decoration pollution), such as plaster lamps in Laozhuang It is a natural source of negative ions that can volatilize negative ions called “air vitamins” and improve indoor air quality.

• 

• 

An air disinfection machine is a machine that sterilizes and sterilizes the air. In addition to killing bacteria, viruses, molds, spores, and other so-called sterilization, some models can also remove formaldehyde, phenol, and other organic pollutants in the indoor air, and can also kill or filter pollen and other allergens. At the same time, it can effectively remove the smoke and smoke generated by smoking, the bad smell of the bathroom, and the human body odor.

• 

• 

Can the air disinfection machine achieve all-round air purification?

Most air purification equipment on the market can only simply filter air pollutants. However, filtration is not the same as disinfection. The filter of this type of air purification equipment can only absorb particulates, not viruses, and other tiny harmful substances. Bacteria and fungi attached to the particulates may breed and multiply on the filter. And secondly, pollute the air. Other air purification technologies, such as ionization, photocatalytic oxidation, or ultraviolet radiation, also have problems such as long inactivation, the release of harmful by-products, and poor effects, and cannot achieve instantaneous killing effects on bacteria and viruses.

• 

• 

The difference is that the YG Machinery air disinfection machine adopts plasma air disinfection technology, and its disinfection device is mainly composed of a coiled tube surrounded by a strong plasma field. When indoor air is sucked into the device by a fan and flows through the plasma coil tube, it can release electricity through the plasma field to kill or inactivate a wide range of airborne pathogens; at the same time, it can be destroyed by the DNA level within a few seconds, achieving rapid Inactivation, without leaving hidden dangers, is the only technology that can instantly kill airborne viruses and pathogens.

First of all, you must know the raw materials and size of your workpieces, the number of workpieces you need to process each day, and the effect of sandblasting. Then, through consultation with the sandblasting machine manufacturer, decide what kind of sandblasting machine to buy. Just look at the price, it depends on the quality of the sandblasting machine and whether the sandblasting machine is suitable for your product. It is a waste to buy your own products if they are not suitable.How to choose a suitable sandblasting machine?

• 

• 

1. Find a regular automatic sandblasting machine manufacturer. At present, there are many unqualified sandblasting products on the market. If you buy it back, there may be a lot of problems. The after-sales can’t keep up, causing a lot of losses. So be sure to choose the now regular factory.

2. Submit to the automatic sandblasting machine manufacturer the raw materials, size, amount of workpieces to be processed every day, and the effect of sandblasting so that the manufacturer can provide you with a professional sandblasting plan.

3. When the conditions are agreed upon, it is recommended that the user bring something to the manufacturer to test the sandblasting effect, and also to inspect the manufacturer’s strength.

4. Sign a contract with the manufacturer to compare guarantee the after-sales service of the sandblasting machine.

• 

• 

• 

noise. The noise of the automatic sandblasting machine is not very loud, but when buying multiple sandblasting machines, there will be a disturbance problem, so how to reduce the noise of the sandblasting machine?

1 Enhance sealing. In the long-term use of the sandblasting machine, the sealing function will inevitably decrease. How to enhance tightness has become a key issue. The selection of raw materials is very necessary. If you want to enhance the sealing function, you must choose thicker materials. The door edge seal of the sandblasting machine is also important. The selection of materials should also choose better sealing materials so that the sealing function can be greatly improved.

2 The motor and fan are equipped with a muffler. The motor and the fan are a key part of announcing noise. We can add a muffler at the air outlet of the fan. The increase of the muffler can reduce the noise to a certain extent, and then achieve the purpose of reducing the noise.