Nitrile gloves are mainly made by dipping nitrile latex, molding, vulcanizing, surface treatment, dust-free cleaning, and other processes. The specific production process is as follows:

First of all, the material for making nitrile gloves is nitrile rubber, which is formed by the emulsion polymerization of butadiene and acrylonitrile.

• 

• 

Then, the hand-washing mold: the hand-washing mold needs to be pickled first, washed first, alkali washed, and then washed. After washing the hand mold, it should be dried or dried before entering the next process. The third step is to impregnate the nitrile latex to shape the glove. That is, the hand mold is immersed in a container filled with nitrile, heated at a high temperature, and dried after forming the glove.

Next, we need to prepare the gloves to curl to facilitate putting on and taking off the gloves. After the above steps, the nitrile glove has been formed, but it has not been successful. A key step is needed: chlorine washing. Chlorine cleaning can remove the stickiness on the surface of the gloves and make the gloves softer and smoother. This is an important reason why nitrile gloves are easy to wear. In the end, the nitrile glove was separated from the hand mold, and a pair of gloves was successfully born.

• 

• 

Advantages of latex gloves

1. 100% pure primary color latex, good elasticity, comfortable to wear.

2. Comfortable to wear, free of oxidants, silicone oil, fat, and salt.

3. High tensile strength, puncture resistance, and not easy to break.

4. It has excellent chemical resistance, resistance to certain pH, and certain organic solvents, such as acetone.

5. There are few chemical residues on the surface, low iron content, low particle content, suitable for a strict clean room environment.

• 

• 

The difference between latex gloves and nitrile gloves making machine?

YG Machinery latex glove production equipment adopts a continuous production method and direct dipping method, with uniform film formation and bright color. Various models and specifications can be produced online at the same time. The production line length is 60 meters, 80 meters 100 meters, and other specifications, with a high degree of automation. Large output, automatic demoulding can be configured, and the length of the production line can also be designed and installed according to the customer’s production site.

latex glove making machine refers to the machinery and equipment for producing latex gloves using natural liquid latex as raw material. Generally, it is processed through a series of processes such as hand-molded dipping tank, drying, curing, and cooling. Latex gloves are divided into five types: smooth latex gloves, hemp latex gloves, striped latex gloves, transparent latex gloves, and powder-free latex gloves. Latex gloves are divided into disposable latex gloves, household latex gloves, industrial latex gloves, Medical latex gloves, and other categories. At the same time, nitrile and latex can be produced on the same production line, the main difference is that the production process and raw materials are different.

The pile breaker uses a power source to provide pressure to multiple cylinders of the pile breaker, and the cylinders directly drive the drill rods while squeezing the pile body to cut off the pile head. During the construction of the pile breaker machine, the operation is simple, high efficiency, low noise, low cost, and is suitable for pile group construction projects. The pile breaker adopts a highly modular combination, and the modules are connected by pin shafts, and the pile heads within a certain range of diameter can be cut by combining different module numbers.

The hydraulic pile breaker is composed of modules, which can be installed and disassembled according to the diameter of the broken pile head. Installed at the front end of an excavator or crane, using the power of an excavator or hydraulic station to break piles, mainly to destroy solid cast-in-place piles and solid precast piles. According to site requirements, pipe piles may be destroyed. Hydraulic pile breaking machine cuts and removes: such as cast-in-place piles, precast piles, etc., from the shape of the broken pile head, it can be divided into round pile breakers and square pile machines. Pile breaker machines have been widely used in high-speed railway bridges, industrial and civil construction pile foundation projects.

• 

• 

Operation steps of pile breaker machine

1. Hang the installed hydraulic pile breaker on the front end of the excavator or the front end of the crane, and link the excavator pipeline or hydraulic station pipeline.
2. Enter the construction site and put the hydraulic pile breaker on the pile head to be broken.
3. Use the power of the excavator or the power of the hydraulic station to break the pile.
4. Move the hydraulic pile breaker down 30-50cm and continue to break the pile.
5. Repeat steps 2-3 until the pile head is destroyed.
6. Clean up the broken piles.

• 

• 

Performance characteristics of the pile breaker

1. Simple: Modular structure, simple installation, equipped with different numbers of modules according to the pile diameter.
2. General: The hydraulic pile breaker can use the power of the excavator or the power of the hydraulic station.
3. Environmental protection: full hydraulic drive, low noise, static pressure construction, does not affect the quality of the pile.
4. Low personnel cost: It is mainly operated by one operator of the excavator driver, and another supervisor can be equipped.
5. Safety: The constructor is the driver of the excavator and does not directly touch the broken pile.

1. Road cleaning: clean the ground before construction to remove dust, laitance, and moisture.
2. Make all preparations before construction and check whether the bolts at each connection part are loose, whether the liquefied gas pipeline of the heating system is well connected, and whether the switches are placed in the correct position.
3. Open the liquefied gas tank, ignite the gas, preheat the mixing bucket marking bucket, clean the marking bucket, and at the same time add lubricating oil to lubricate all parts, and then put the heated paint into the marking machine mixing bucket Medium. The paint in the mixing tank needs to be stirred frequently to avoid precipitation or burning.
4. Stakeout: Since the hot melt marking paint is basically formed at one time, the route and pattern need to be marked before construction.
5. Coating hot melt: the conventional construction equipment includes a blower, hot melt kettle, and hand-pushed line marking machine, the paint needs to be put into the hot melt kettle to heat and melt before construction marking.
6. After the paint is melted, set up the marking machine according to the staked line, and flow out the molten hot melt marking paint, and at the same time spread it on the coating film through a self-weight glass bead spreader.
7. Correction: After the marking is constructed, it is necessary to make corrections before the hot melt coating is fully cured, remove the markings that do not meet the requirements, shovel the overflowing coating film, and check the size, thickness, and the distribution of glass beads.

• 

• 

What is the general composition of a thermoplastic road marking machine?

The thermoplastic road marking machine for sale consists of a hot-melt kettle, a marking machine (including a zebra marking machine), a pre-marking machine, and a primer machine. The thermoplastic road marking machine for sale is a kind of road marking equipment, which is widely used in marking construction on municipal roads, parking lots, squares, and sports fields. The thermoplastic road marking machine needs to be used in conjunction with the hot-melt kettle, and the coating needs to be scribed after the coating is hot-melted. There are also hot-melt marking integrated. The YG thermoplastic road marking machine for sale has both hot-melting and marking functions to save trouble. YG Machinery has a variety of road marking machines to choose from.

Core drilling rigs are deep hole drilling equipment for geological prospecting, hydrological water wells, coalfield geological exploration, oil, and natural gas exploration and development. The drilling rig combines the advantages of vertical shaft hydraulic drilling rigs. It can perform diamond drilling with small diameters, large diameters, vertical drilling, and inclined holes. It is ideal equipment for deep-hole geological exploration drilling.

• 

• 

Core drilling machine for sale scope of application

1. Engineering geological survey of railway, hydropower, transportation, bridge, dam foundation, and other buildings.
2. Geological core drilling, physical survey.
3. Drilling of small grouting holes and blasting holes.
4. Drilling of small water wells.

• 

• 

Features of core drilling rig:

1. Equipped with a hydraulic automatic feeding mechanism to improve drilling efficiency and reduce the labor intensity of workers.
2. The ball clamp clamping mechanism is used instead of the chuck, and it is equipped with a clamping positioning mechanism to realize the non-stop inverting rod.
3. Equipped with a pressure gauge at the bottom of the hole to indicate the pressure, which is easy to grasp the situation in the hole.
4. The handle is centralized and easy to operate.
5. Compact structure, the drilling rig, and power machines are installed on the same base, occupying a small area.
6. Lightweight, strong decomposability, easy to move, suitable for working in plains or mountainous areas.
7. Equipped with a safety shield, highlighting the humanized design features of the equipment.
8. A fixed nut is installed at the connection between the lower end of the feed cylinder and the vertical shaft box, which improves the reliability of the drilling rig.

The rated drilling depth of the core drilling rig is 200m, and the depth shall not exceed 220m. The rated opening diameter is 200mm. A large opening diameter allows 300mm. The drilling depth and drilling diameter should be determined according to the formation conditions.

The high-pressure airflow sprayed by the electrostatic backpack sprayer breaks the disinfectant droplets into fine and uniform droplets. After passing through the high-pressure electric field of the nozzle, the droplets overcome the surface tension of the droplets and break again into fine and uniform droplets. Double atomization channels crack the fog drops. The fog droplets carry charges and adhere to the surface of the target in all directions under the action of the electric field force. The electrostatic effect makes the droplets tightly adsorb the surface of the object in 360 degrees and can capture suspended particles in the air to achieve efficient and thorough disinfection and epidemic prevention effect.

• 

• 

Affected by the global COVID-19 epidemic and the need for disinfection in various countries, due to the above good spraying effect, this professional backpack sprayer is currently used for disinfection and epidemic prevention. Electrostatic disinfection sprayers can be divided into professional backpack sprayers, fogging sanitizer machines, car disinfection fogging machines, and blu ray anion nano spray gun. All in all, there are many types of electrostatic sprayers suitable for different places.

• 

• 

Features of professional backpack sprayer:

1. The diameter of the fog particles is small, the penetration is strong, and the diffusion is fast! The diameter of the fog particles is between 10-40μm, and the naked eye can see the fog flowers hovering in the air. Due to the effect of static electricity, the sprayed liquid medicine is charged, and an electric field is formed between the crop and the crop will actively absorb liquid medicine.

2. Good effect and high efficiency! The electrostatic droplets have high coverage density, uniform landing, and strong penetration. Random spraying will not produce the appearance of wetting, the electrostatic spraying effect is good, with strong adhesion, without repeated spraying, and the efficiency is greatly improved.

 3. Save medicine and environmental protection! Due to the strong adsorption force and little drift, the spray liquid is very thin and not easy to slip off, which greatly reduces the waste of liquid. Compared with the ordinary electric sprayer, it saves more than 30% of the liquid medicine, reduces the pollution of the liquid medicine to the air and the ground, and greatly reduces the damage caused by the drifting liquid medicine to the human body.

• 

• 

4. Long shooting range and large spray range! Static electricity has an obvious supercharging function, which can reach 50%. When the static electricity works, the spray distance is longer, the spray range is larger, and the mist particles are finer.

5. 360-degree sterilization without dead ends! Due to the electrostatic adsorption, the insecticidal rate is twice that of ordinary sprayers.

Many viruses and bacteria are spread through the air, especially in public areas with a large number of people, noisy, and high flow of people. The air spreads more quickly, which may cause various damages to the body. You should find a suitable disinfectant. To prevent human damage. Therefore, air disinfection is still necessary. However, many disinfectants are harmful to human health, and how to choose a disinfectant is also a choice that cannot be ignored.

• 

• 

The fog sprayer machine adopts an integrated ultrasonic movement, no mechanical drive, no noise, good atomization effect, low failure rate, simple maintenance, convenient operation, and automatic time control. The output of the whole machine is only 1-10 boxes. The body is made of stainless steel cylinder, and the exterior is sprayed with plastic, which is beautiful and generous and is equipped with a water tank. The disinfectant is sprayed through ultrasonic atomization, so as to achieve the purpose of air disinfection. The diameter of the mist particles of the disinfectant is only 0.55mm, which can kill all mist particles suspended in the air without dead ends.

• 

• 

The fogging sanitizer machine uses the following disinfectants:

1. The liquid medicine used in the fogging sanitizer machine is mainly several natural superfine tourmalines and several other composite powder inorganic materials as the main raw materials, which are produced by superfine processing, scientific formula, and mixing ratio. It has permanent pyroelectric and piezoelectric properties.

2. In the case of temperature and pressure change or when it is excited by other energy, it will generate an electric charge, release a large number of negative ions, and can emit antibacterial molecules that are beneficial to the human body, which can sterilize bacteria, eliminate odors, and improve air quality. It can quickly remove the residual formaldehyde, benzene, and other harmful substances after home decoration.

• 

• 

3. If alcohol is added, the original effect is often not achieved, and it may have a bad effect on the respiratory system of people with special constitutions.

YG Machinery’s fog sprayer machine adopts a food-grade disinfectant, which can achieve the effect of sterilization and disinfection without dead ends. The working principle of the fogging sanitizer machine is to atomize the disinfectant with an ultrasonic atomizer. During the atomization process, a large number of fine cationic atomized particles are released, and the cationic particles react electrostatically with the smoke and dust floating in the air, thereby effectively achieving deodorization, disinfection, sterilization, degradation of formaldehyde and harmful organic volatiles.

 With the popularity of pile breaker machine in the industry, more and more projects use or intend to use this equipment. The popularity of pile breaker machine is inseparable from changes in the environment, such as the increase in labor costs, and the constraints of the construction period. The construction speed of the pile breaker is very popular because it is dozens of times faster than the manual construction.

• 

• 

The pile breaker produced by major manufacturers basically adopt a highly modular combination, which connects the modules through pin shafts, and combines the number of different modules to cut pile heads within a certain range of diameter. However, the actual number of modules is quite different. For example, the number of modules required to eliminate a 1.5-meter pile head is different from major manufacturers. Some require 12 modules, and some require more, and this number It will involve the later purchase amount and efficiency.

• 

• 

In addition to the number of modules, the drill rod stroke of a single module is also different. The different drill rod strokes of the modules mean that the degree of crushing of the broken pile heads per unit time is different. The outside of the pile head is obvious, and the internal fragmentation mostly depends on the module’s drill rod stroke.

The weight of the module is also another factor to distinguish the performance of the pile cutting machine. Although heavier modules require more transportation costs, the weight of the module is closely related to the pressure it bears, its efficiency of pile cutting machine, and the pile diameter that can be broken. Being able to break the larger pile diameter means that the accepted projects are not restricted, as long as the corresponding modules are added or reduced, without having to replace another brand of modules.

• 

• 

In addition to the performance of the pile breaker, the service of the manufacturer is also very important. For example, the selected logistics speed, the time for the installer to arrive at the construction site, and the after-sales service. YG Machinery is a professional manufacturer of machinery and equipment, and a reliable manufacturer with a professional design team. The machinery and equipment sold are well received by customers at home and abroad. Contact us for more machinery and equipment prices.

 In recent years, various types of fog cannon equipment have entered the field of vision of the general public. There are vehicle-mounted fog cannons similar to sprinklers; there are small fog cannons machines used in road construction, which can be operated and controlled by a single person; there are tower-type fog cannons that are installed on high platforms and cover fixed areas. Perhaps many people have doubts about this, what is the role of this kind of dust suppression cannon, and why there are more and more.

With the increase in environmental protection in recent years, especially the stricter requirements for dust emission control, the use of fog cannon machine to control fugitive dust and other dust is more and more favored by users. The environmental protection work process continues to advance, just like Like new technology and new technology, it is inevitable that the fog cannon machine will approach the public!

• 

• 

1. Environmental protection and dust removal

The main application of mist cannon is in environmental protection and dust removal. Common ones include excavation of earthwork on construction sites, quarrying and blasting, dust reduction in stockyards, dust removal in coal yards, and urban sanitation.

There are two types of mist cannons: fixed and mobile. Generally, fixed fog cannons are arranged on fixed platforms, towers, etc. according to dust removal needs. Spray the dust-producing points within the radius.

• 

• 

2. Spray pesticides

Drug spraying is commonly used in gardening and sanitation departments to spray drugs on street trees on urban roads. Add the well-proportioned medicinal solution into the water tank, and atomize the medicinal solution through a dust suppression cannon to act on the sidewalk trees on both sides of the road.

• 

• 

3. Watering and cooling

In addition to dust reduction and drug spraying, the dust suppression cannon can humidify and cool some large playgrounds and parks and parks. At the same time, it can spray water and moisturize the roads in the industrial parks of some enterprises and institutions.

At the same time, the application of fog cannons (dust control water truck) in landscaping. Everyone should not be unfamiliar with it. Its role in “reducing dust and optimizing the environment” can be said to be obvious to all.

Core drilling rig is a type of core drilling equipment, which is mainly used for general survey and exploration of metal and non-metal solid minerals. In addition, it can also be used for engineering geological survey, hydrogeological survey, general survey and exploration of oil and gas fields, and water well drilling. Since hydraulic core drill require relatively complete, unmixed and non-flexible formation rock samples, core drilling rigs are all rotary drilling rigs. According to the structure of the drilling rig gyrator, hydraulic core drill can be divided into three categories: vertical shaft type, rotary table type and mobile gyrator type.

• 

• 

Advantages of hydraulic core drilling rig

1. The drilling rig adopts an automatic telescopic rig, supported by two high-strength oil cylinders, and a set of hydraulic valves control the rig to lie supine, saving time and effort, safe and reliable, and creating benefits for users to the limit.
2. The chassis adopts rubber track, which is lighter in weight and lower in life cycle cost. It can reduce the noise of the vehicle’s running mechanism, reduce the vibration of the vehicle body, and greatly reduce fuel consumption. It can walk on urban roads without hurting the road surface.
3. The chassis comes with four high-strength threaded legs (or hydraulic high legs) for quick and convenient installation and adjustment. They can be used for leveling the working plane. The loading and unloading truck can reduce the cost of lifting and improve efficiency. It can be used as an auxiliary support during work.
4. The 48V electric start diesel engine is adopted, which greatly reduces the labor intensity of the operator, especially in cold seasons, when the diesel engine is difficult to start, it shows great advantages.
5. This machine is equipped with an independent mud pump, which has large flow and pressure and is convenient for maintenance.

• 

• 

The basic structure of the hydraulic core drill:

1. Rotary mechanism. The slewing mechanism of the drilling rig is called a gyrator, which is used to drive the drilling tool to rotate, so that the drill bit can continuously break the rock. There are three types of gyroscopes for core drilling rigs: vertical shaft type, turntable type and mobile type. The classification of core drilling rigs comes from this.
2. The lifting mechanism is used to lift down the drilling tool, casing or other things. Most drilling rigs are specially equipped with a lifting mechanism, which is generally called a “lift”, while some drilling rigs are not equipped with a lifting mechanism. For example, in a mobile gyrator type drilling rig, the power head and the feed mechanism are used to realize the function of the elevator. The operating device is used to distribute power, adjust the movement speed of each working mechanism of the drilling rig, and change the movement direction and form of the working mechanism.

 The most common road marking machines are hot melt marking machines and cold spray marking machines. What are their advantages? How to choose? Now let YG Machinery, the manufacturer of the line marking machine, introduce you to help you better choose the right line marking machine.

• 

• 

Advantages of thermoplastic road marking machine:

1. Advanced technology Frame structure, multi-channel hydraulic control valve, stepless speed change, specially designed overload overflow device, multiple specifications and models.

2. Efficiency and energy saving. Oil and gas dual purpose, stainless steel pot wall, hydraulic single and double cylinders, multi-channel integrated control valve, hydraulic transmission system, air-cooled water-cooled engine, energy exhaustion device, energy saving and more efficient.

3. Simple and convenient. Efficient and energy-saving burner, saving time and energy, high melting efficiency, long continuous working time, simple operation and convenient maintenance.

4. Good visibility depends on the visibility at night and in rainy weather. This depends on the quality of the glass beads and the amount of glass beads in the paint. The glass beads should be spread evenly and in an appropriate amount for good visibility; too many or too few glass beads will affect the reflective effect of the marking. Experiments show that half of the diameter of the glass beads is embedded in the coating film and has a better reflective effect.

• 

• 

Advantages of cold spray road line marking machine 

1. The marking effect is good, the marking is clear, smooth and even, and the work efficiency is high, saving working time.

2. It is a hand-push type walking, has the characteristics of free steering, flexible, and reliable orientation.

3. There are stoppers on both sides of the spray gun, which can avoid the problem of line width and edge hair.

4. The spray gun can be disassembled freely, different nozzles can be replaced, and the width of the marking can be controlled to meet different application requirements.

5. It can be used for ordinary airless spraying for spraying marks or signs.

• 

Thermoplastic road marking machine and cold spray road line marking machine have their own advantages and disadvantages. In application, the thermoplastic road marking machinehas a wide range of applications, and the price of cold spray road line marking machine is lower. The specific choice depends on the actual situation, choosing the right one is the most correct.