During the epidemic, disinfection and sterilization after going out has become one of our common sense. In some places with heavy traffic, such as office buildings, stations, shopping malls, hotels, hospitals and public toilets and other public places with a high risk of infection. It is obviously not realistic to rely on the staff on duty to sterilize and kill the visitors (passengers) one by one. YG Machinery has launched the atomized antibacterial intelligent disinfection door, which can disinfect and sterilize the human body without dead angle atomization.

The intelligent disinfection door frame is arranged in a matrix with densely arranged atomization nozzles, which can disinfect and inhibit the bacteria through the whole body. The ion atomization system used is matched with a medical-grade disinfectant-HClO sterilizing aqueous solution (hypochlorous acid disinfectant), which is harmless and non-irritating to the human body. In order to facilitate daily use, there are disinfectant replenishment ports on both sides of the intelligent atomization disinfection door, which can be refilled conveniently and quickly, so as to achieve 24h disinfection and antibacterial and improve hygiene.

• 

• 

Advantages of atomization disinfection door:

1. When personnel pass through the intelligent disinfection door, they can quickly kill foreign germs and bacteria carried by the human body and block the transmission of foreign diseases.

2. The disinfection time only takes 5-15 seconds, it is not harmful to human health, and it is safer, faster and more convenient to use, and more efficient.

3. The atomization effect is good, the fog flow is crossed in multiple directions, the coverage is thorough, and the adhesion is strong. The disinfection and sterilization effects are significant, and the efficiency is high.

4. The scope of disinfection is wide, and the whole body is thoroughly disinfected, which can effectively isolate the source of infection and reduce germs.

5. The sprayed disinfectant is harmless to the human body, does not cause discomfort, and ensures the health and safety of the human body.

• 

• 

Why install a intelligent disinfection door?

In order to combat the epidemic and ensure safety and hygiene, schools, hotels, supermarkets, playgrounds and many public places should install intelligent disinfection doors to achieve a full range of atomized spraying methods without dead ends for disinfection. Since the atomization disinfection door is easy to operate, efficient disinfection can be achieved. In order to control the spread of virus clusters and cause cross-infection, and an infrared detection system has an abnormal body temperature, an alarm will be issued immediately, reminding the inspector to perform a second inspection. Many sites have introduced a disinfection door. You can contact me if you have any needs, and we will have a sales manager contact you as soon as possible.

The mortar spraying machine is a professional spraying machine specially used for spraying mortar. It can be used for spraying mortar with mortar particles below four or five millimeters. The cement sprayer machine can be used not only for spraying, but also for pouring mortar. In addition, the concrete mortar spraying machine is commonly called cement plaster spraying machine because of its high efficiency spraying speed. Because it can spray cement, it is also called cement sprayer machine. Because it can spray putty powder, refractory materials, latex paint, fireproof materials, also commonly known as mortar sprayers. The operation of cement mortar spraying machine is very simple. The cement sprayer machine does not require scaffolding or any mobile equipment. It can freely spray the inner and outer walls, the inner and outer corners, and the ceiling. Using concrete mortar spraying machine can not only shorten the construction period, but also save other costs.

• 

• 

The operation and use of the spray gun mainly pay attention to three problems

1. Gun distance: The distance between the nozzle of the cement mortar spraying machine and the surface to be coated is called the gun distance, and the distance between the guns should be 300~400mm. If the gun distance is too small, the spraying pressure is too large, the recoil force is also large, and the coating is prone to unevenness. Moreover, the spray width (fan width) is small, so that the part to be coated is sprayed with too much material and the coating film is too thick. If the gun distance is too large, the spraying pressure loss will be large, and the paint will be easily lost. Moreover, the spray width is too large, so that the partial spray material of the coated object is too small, and the coating film does not meet the thickness requirements.

• 

• 

2. Spraying fan angle: The spraying fan and the surface of the object to be coated should be perpendicular to each other. When manually operating the spray gun, pay attention to the width of each spraying should not be too large. Otherwise, the inconvenience of operation will cause obvious changes in the angle of the spraying fan, resulting in an uneven coating.

3. The running direction and speed of the spray gun: The running direction of the spray gun should always be parallel to the surface of the object to be coated and perpendicular to the spraying fan surface to ensure the uniformity of the coating. The running speed of the spray gun should be stable, preferably 300~400mm/s. Unstable speed, uneven coating thickness, too fast running speed, too thin coating, too slow coating too thick.

Hydraulic rock splitter, also called a splitter, is a machine used to split materials. It is mostly used in construction, decoration, engineering construction, and ore mining. The rock splitter machine is composed of two parts: a hydraulic power station and a splitting machine. The rock splitting equipment is driven by the ultra-high pressure oil output from the pumping station to generate a huge driving force. After being mechanically enlarged, the split object can be split in the predetermined direction. The hydraulic station supplies 60Mpa hydraulic oil to the splitting machine. The hydraulic concrete splitter can generate tens of tons of thrust. The hydraulic rock splitter pushes the chip to expand on both sides. The expansion force can reach several hundred tons so that the object can be separated from the inside.

• 

• 

Hydraulic rock splitter application range:

Hydraulic rock splitter is mainly used for: tunnel excavation, underground prospecting and excavation of rock bases, multiple splits of extra-large rocks, and whole-piece mining of marble and granite. Demolition operations in indoor and narrow sites, demolition of reinforced concrete structures/plain concrete structures, foundations, walls, old bridge piles, chimneys, cutting pile heads, and secondary monolithic demolition of thick concrete slabs.

• 

• 

Performance advantages of hydraulic rock splitter:

1. The rock splitter machine is a controllable work under static hydraulic pressure. Therefore, it will not produce some hidden dangers like other impact demolition and rock drilling equipment, and there is no need to take complicated measures.

2. When rock splitting equipment is working, it will not produce vibration, impact, noise, dust, flying debris, etc., and the surrounding will not be affected. Even in densely populated areas or indoors, as well as close to precision equipment, you can work.

• 

• 

3. The hydraulic concrete splitter can be completed in a few seconds and can work continuously without interruption, with high efficiency; its operation and cost are very low; there is no need to take isolation or other time-consuming and expensive measures like operations.

4. The humanized use design and durable structure design of hydraulic rock splitter ensure that it is simple to use and easy to learn, requiring only one person to operate; it is convenient and has a long service life;

5. The transportation of rock splitter machines and power stations is also very convenient. Unlike most demolition and equipment, the splitting machine can predetermine the direction, shape, and size of the part to be taken out, and the demolition accuracy is high.

6. The concrete splitter has the characteristics of small size, light weight, and high force. It can be easily dismantled indoors or in narrow places; at the same time, it can also be operated underwater.

The serious air pollution in modern cities reduces the amount of oxygen that can be absorbed into the body. The appearance and health of white-collar women living in this environment will be seriously threatened. Hypoxia will be one of the main causes of many diseases, so enough oxygen It is very important for beauty. So, what is the principle of an oxygen generator machine? What is a PSA oxygen generator?

The oxygen generator has the function of health care. It can improve the oxygen supply status of the body by supplying oxygen to achieve the purpose of oxygen supplement and health care. It is suitable for middle-aged and elderly people, people with poor physical fitness, pregnant women, college entrance examination students, and other people with varying degrees of hypoxia. It can also be used to eliminate fatigue and restore physical functions after heavy physical or mental exhaustion. The principle of oxygen generator: In a medical oxygen generator, a molecular sieve discharges the adsorbed nitrogen back into the ambient air during decompression, and can adsorb nitrogen and produce oxygen during the next pressurization. The whole process is a periodic dynamic cycle process. Molecular sieves are not consumed.

• 

• 

What is a PSA oxygen generator?

PSA oxygen generator uses pressure swing adsorption technology, namely PSA technology, to desorb high-concentration medical oxygen with air as raw material. After the raw material air is pressurized by an oil-free compressor, it passes through an air filter device to remove dust and other solid impurities. The processed compressed air enters the adsorption tower equipped with desiccant and molecular sieve through the intake valve, and the nitrogen and carbon dioxide in the air is removed. Adsorption, the outflow gas is high-purity oxygen. When the adsorption tower reaches a certain degree of saturation, the inlet valve is closed, the exhaust valve is opened, and the adsorption tower enters the release flushing stage. After that, the exhaust valve is closed and the desorption valve is opened to enter desorption. In the regeneration phase, a cycle is completed in this way. Two adsorption towers carry out the same cycle process respectively, so as to realize continuous oxygen supply.

• 

• 

  Compared with the traditional chemical oxygen production method or relying on oxygen cylinders to absorb oxygen, the PSA oxygen generator has the characteristics of economy and safety. The raw material of the PSA oxygen generator is air, and the only thing that needs to be consumed is electricity, and the PSA (pressure swing adsorption) technology is Purely physical, so it is safer. When the power is turned on, high-concentration, dust-free, and sterile medical oxygen can be continuously separated from the air immediately.

Cracks are the most common, the most prone and one of the earliest road diseases in all types of road damage. It accompanies the entire use period of the road, and increases as the age of the road grows. In order to prevent serious damage to the asphalt pavement and extend the life of the road, it is necessary to grouting the asphalt pavement in time. The pavement equipment used at this time is the asphalt crack filling machine.

• 

• 

Cracks are one of the main forms of early disease on expressways, among which linear cracks such as horizontal cracks and longitudinal cracks are common. Filling technology is the treatment technology for these diseases, covering such aspects as filling materials, filling equipment, and filling technology. Crack filling equipment is the core equipment of filling technology. The function of asphalt sealing equipment is to heat the cracks after grooving and cleaning the cracks and pour the sealant evenly into the grooves with a filling gun to complete the joint repair work.

During construction, in addition to a crack sealing machine, we also need a slotting machine and a hair dryer. First, we use the slotting machine to cut the irregular cracks and then use the hair dryer to blow out the magazine for filling the seams. Crack filling equipment uses this method to repair the asphalt rubber by heating and emulsifying it, and then filling it into the crack. Not only is the construction simple, but the repaired effect is also beautiful, and the service life of the road is extended. Asphalt crack filling machine has stable and reliable performance and fast working speed, which not only saves labor investment, but also improves the quality and efficiency of the project, and the road maintenance is more worry-free!

• 

• 

Matters needing attention during asphalt crack filling machine construction

1. Immediately carry out construction after starting, especially when it is cold, the asphalt crack filling machine needs to be preheated.

2. Too hasty during construction, long-term operation will directly lead to increased loss of many parts.

3. Continue the construction under the condition of a large inclination, which will cause the oil pressure supply to be insufficient. If the situation forces it, occasionally such construction will not have much impact, but such construction will seriously affect the power for a long time.

4. Turn off the engine immediately after the construction is completed. The engine temperature is too high just after the construction, which will cause the water in the engine to not circulate to the water tank.

5. When finishing work, park the asphalt crack filling machine in an uneven place, which will cause uneven force on the pressure roller, which will cause deformation in the long run.

The vibration road roller machine is heavy-duty mechanical equipment used for rolling and leveling. Its working principle is mainly to use its own gravity to plastically strengthen the compaction of those sandy, semi-clay soil or asphalt concrete roads. . Road compactor can be divided into vibration road roller and static road roller machine. There are single steel wheels and double steel wheels for the vibration road roller machine, but these two types can also be used for static rolling when the excitation is not turned on. The rubber wheel roller is dedicated to static rolling. Conventional use is: single steel wheel is used in the roadbed, double steel wheel and rubber wheel are used in oil surface. However, double steel wheels and rubber wheels will also be used on the roadbed according to different construction techniques and materials.

• 

• 

Road compactor driving instructions

1. Before starting, the small road roller machine should go around the machine to check and confirm whether there are people or obstacles around it.

2. Check whether the (fuel, hydraulic oil, coolant) is normal before starting the machine, and then ensure that the glass reflector of the cab is clean and bright to ensure that there is no hindrance during construction.

3. Before starting the engine, make sure that there are no construction personnel or obstacles around the mini road compactor. After starting, check whether the meter is normal for alarms, and start working after everything is normal. The above is a compulsory course before going to work every day and must be implemented carefully!

• 

• 

Matters needing attention in construction of vibration road roller machine:

1. The rubber wheel road roller machine uses a low speed when working. When working, pay attention to whether there are people or obstacles on the front, back, left, or right.

2. Pay attention to the formation and separation distance of multiple road roller machines during joint operation (3-5 meters front and rear, 0.5-1 meters left and right), and low speed (0-7km/h) when running on a slope to prevent inertial landslides , When rolling, it must follow the rolling process specified by the construction personnel, no leakage during rolling, no change of rolling speed, and no parking.

3. It is strictly forbidden to repair or refuel while the road compactor is running. The driver is strictly forbidden to leave the machine while the vibration road roller is running. It is strictly forbidden for anyone to get on and off the machine while driving. It is strictly forbidden to wear slippers, shorts, sandals and earphones to work.

The fog cannon dust suppression is divided into a head of 30 meters-60 meters-90 meters, divided into two specifications of remote control type and manual type. The operation is simple and easy to use. It can include a complete set of water tank installed on the sprinkler transportation vehicle, can bring its own generator, good maneuverability, simple vehicle-mounted fog cannon machine and excellent electronic control function during work, so that the operability is greatly enhanced, and the driver can drive to the demolition. Any dust-reducing area sprays to reduce dust, regardless of geographical restrictions, and the operation can be completed independently.

• 

• 

Dust suppression cannon is specially used for dust and sand control on construction sites in urban development zones, demolition sites, station coal storage yards, coal washing plants, coking plants, iron ore, steel plants, ports, etc. Its farthest spray distance is 60 to 160 Meters, the maximum water storage capacity of a bicycle is nearly 20 tons. The main function of the fog cannon machine is spraying and dust suppression. It also has the functions of water spraying and roads to effectively suppress the generation of dust.

During construction, the mist sprayed by the dust suppression cannon drifted like a drizzle with the wind, floating on the face like a layer of sweat, it will not wet the clothes at all, and will not “mud” on the ground. , The smaller the water mist, the easier it is to adsorb fine particles, and the hourly water consumption is less, which is more water-saving than a sprinkler. Mist cannon can not only be used to reduce dust on construction sites by water mist, but also be installed on the roof of high-rise buildings. It can be sprayed regularly every day to reduce dust. It can be used for a long time. It can effectively reduce dust from road vehicles and increase air humidity to help improve surrounding roads. And the air quality of the community.

• 

• 

Features and advantages of fog cannon machine:

1. The range is farther: each fog cannon dust suppression machine has undergone rigorous testing and testing before being transported. Each inspector pulls the tape measure to the designated number of meters to record the spray distance of the mist cannon machine.

2. Low power consumption, low energy consumption: Based on years of nozzle research, many experiments have been conducted on dust suppression cannon. It adopts fan frequency conversion start, PLC control and hydraulic rotation. Compared with other fog cannon equipment in the same industry, the fog cannon is more powerful, consumes less energy and has more stable performance.

• 

• 

3. Fog cannon dust suppression has a better effect: the dust removal effect is closely related to the particle size of the fog gun. The company developed the soul component of the mist gun-the nozzle, more specifically, atomizes water into suitable dust particles and sprays dust quickly. More evenly.

4. Wide coverage: the dust suppression cannon range is optional from 20 meters to 200 meters, the amount of fog can be adjusted, and the level and pitch are hydraulically rotated, which is practical.

5. The control system is powerful: the fixed dust collection gun is equipped with manual, remote control, remote control and other methods. It uses a full hydraulic rotating system at one time to solve the wind resistance and greatly reduce the failure rate; backup detection device interface, and PM detection instrument Linkage, realize full automation, and restrain the large-scale spread of dust in time.

6. Anti-freezing and preheating design: The control system has a heating reserve interface, and an electric preheating function is added. When used in winter, it will not freeze and damage the equipment.

Road marking machines are widely used in roads, parking lots, squares and runways and other occasions. One of the common ones is to draw a zebra crossing on the road, draw a garage line, a parking line, etc. on the road to be used in small projects and short-distance construction, which is convenient for activities and flexible operation. The advantages of the hand-push thermoplastic marking machine are that it uses less equipment, has a long life span, and can be used for 3 to 5 years. It has good reflection effect at night, strong anti-pollution ability, long-term sharpness, good adhesion, and excellent wear resistance. Sex and durability. The construction of the thermoplastic road marking machine should be prepared in advance, and all necessary on-site safety facilities, tools for repairing markings and markings, gray bags for marking standard lines, and necessary drawing boards, fonts, etc. should be prepared.

• 

• 

The thermoplastic road marking machine is mainly set on the surface of the road. It is exposed to the sun, rain, wind, snow and freezing, and is subject to the impact and abrasion of vehicles. Therefore, it has strict requirements on its performance. First, it requires a short drying time and simple operation to reduce traffic interference; secondly, it requires strong reflection, bright colors, and strong reflectivity, so that it has good visibility during the day and night; third, it should have skid resistance and abrasion resistance. To ensure driving safety and service life. The thermoplastic road marking machine adopts special road special cold paint, which is manually sprayed with uniform thickness and clear color. Including parking spaces, no-stop yellow line areas, passage lines, diversion belts, guide arrows, etc.

• 

• 

Construction operation requirements of thermoplastic road marking machine:

1. The road surface should be clean and dry, and there should be no loose particles, dust, asphalt residue, oil stains or other harmful materials.

2. The road line marking machine should determine the position of the marking and the width and length of the marking according to the specific dimensions of the highway cross section and the requirements of the design documents, and use the lime elastic tool on the road to eject the actual marking position reference line on the road in advance.

• 

• 

3. Before the formal construction, a trial drawing should be carried out to check whether the road line marking machine’s driving speed, line width, marking thickness, and reflective glass beads can meet the requirements. After the commissioning is qualified, the formal construction will begin.

4. During construction, drainage holes should flow out in accordance with the requirements of the design documents, and the protruding road signs at the no overtaking line should be vacant.

5. The defects in the construction should be repaired in time.

6. The construction of the formed marking tape and the non-slip color pavement marking shall comply with the requirements of the product instruction manual.

The general line width of hand-push thermoplastic marking machine is 15 cm. The hot-melt marking material is melted by the hot melt kettle, and the thermoplastic road marking machine is used. The hand-push thermoplastic marking machine is a machine used for hot-melt marking of highway pavements. The powdery hot-melt coating melted at a high temperature of 200° is applied to the road surface by means of scraping.

The compressive strength of rock and concrete is very high, in contrast its tensile strength is quite low. The rock splitter machine is made using this principle. It is the product of the combination of modern hydraulic technology, mechanical technology and traditional demolition methods. It effectively utilizes the wedge principle.

The working method of the rock splitter: firstly drill a hole of a specific diameter and depth in the broken object, insert the splitting head part of the rock and concrete rock splitter into the hole, and the splitting head part will produce a big one on both sides under the action of hydraulic pressure. The maximum tension can reach 480 tons, and the rock or concrete structure can be opened in an instant, and the rock and concrete structure can be destroyed from the inside. Cracks will occur within a few seconds, and the thinner steel bars in the reinforced concrete will be broken. .

• 

• 

rock splitter machine structure

The structure of rock splitter machine is mainly composed of hydraulic station, oil pipeline, splitting gun, chip, etc. According to the type of power station, it can be divided into four types: electric type, diesel type, gasoline type and pneumatic motor. According to the material of the split gun, it can be divided into two types: steel split gun and aluminum alloy split gun. It can also be classified according to the power of the split gun. Hydraulic rock splitter is more suitable for the secondary disintegration of large rock ores, and it is an ideal equipment that can completely replace secondary blasting and manual disintegration.

• 

• 

Features of rock splitter machine:

1. Safety: The controllable work of the rock splitter in a static hydraulic environment will not produce some hidden dangers like blasters and other impact demolition and rock drilling equipment; no complicated safety measures are required.

2. Environmental protection: When the rock splitter equipment is working, it will not produce vibration, impact, noise, dust, flying debris, etc. The surrounding environment will not be affected, even in densely populated areas or indoors, as well as close to precision equipment, can work without interference.

3. Economical: The rock splitter machine can complete the splitting process in a few seconds and can work continuously without interruption. It has high efficiency and low operation and maintenance costs. It does not need to take isolation or other time-consuming and expensive safety measures like blasting operations.

• 

• 

4. Accuracy: Unlike most dismantling methods and equipment for flow transmission, the rock splitter can accurately determine the splitting direction, split shape and the size of the required output part in advance, with high splitting accuracy.

5. Applicability: The humanized shape design and durable structure design of hydraulic rock splitter ensure that its use is simple and easy to learn, only requires one person to operate, maintenance is convenient, and has a long service life; the splitter and hydraulic pump station are very convenient to transport .

The intelligent atomization disinfection door adopts ultrasonic exposure technology, electronic over-frequency vibration (vibration frequency is 1.7MHz, which exceeds the range of human hearing, and damages human animals). After the high-frequency resonance of the atomization film, the price of the intelligent disinfection door will be thrown away from the water. Natural and natural water dew is generated, and the disinfectant is atomized into fine dew particles with a diameter of 1-10 microns, and sprayed into the space required for disinfection, to achieve the effect of killing airborne bacteria and pathogenic microorganisms. Intelligent disinfection door is suitable for all aspects of social life and various fields, such as air disinfection and deodorization in various public places such as food, pharmaceuticals, quarantine, scientific research on epidemic prevention, public transportation, supermarkets and waiting rooms. The intelligent disinfection door is made of stainless steel, corrosion-resistant and deformable, and can be moved easily. The atomization disinfection door adopts 220 mains power, which is convenient to switch, simple to operate, economical and environmentally friendly. Shopping malls and other crowded places.

• 

• 

Disinfection door for Sale product advantages

1. Food grade disinfection, safe and effective, non-contact disinfection.

⒉Matrix-style whole body disinfection without dead ends.

3. The design is humanized, and the layout will not cause discomfort to the respiratory tract.

4. The overall stainless steel material is resistant to corrosion and deformation, and can be moved lightly.

5. Plasma, ultraviolet, light wave disinfection multiple disinfection, disinfection is more thorough.

6.220 mains power, convenient switch, simple operation, economical and environmentally friendly.

7. The human body temperature alarm and thermal imaging body temperature detector can be added to detect the body temperature of the personnel.

• 

• 

Intelligent Atomization Disinfection Door

YG Machinery has a mobile anti-epidemic temperature measurement and disinfection door for sale with face recognition. The atomization disinfection door is equipped with a microwave moving object induction sensor and a high-precision infrared sensor. Which can automatically sense the entry of people, perform spray disinfection and temperature measurement with face recognition. The detailed layout of carpets containing disinfectants and induction hand disinfectants directly ensures the multi-faceted disinfection of personnel.

In the event of abnormal body temperature, intelligent disinfection door will automatically give voice and light alarms. In addition, the intelligent atomization disinfection door uses food-grade disinfection products, which directly guarantees the application safety of personnel entering and exiting. Click here you can check our disinfection door for sale.