Can the fog sprayer machine be used with disinfectant?

 Of course, the disinfectant fogging machine is usually used for spraying pesticides for insecticide use. However, because of the continuous spread of the epidemic, it can be used as an epidemic prevention equipment for spraying machines and sterilization equipment. Compared with ordinary sprayers, the new fog sprayer machine saves labor, energy, water, and medicine, and saves less than a little bit. The sprayed water mist can stay in the air for a long time, and the bacteria and viruses in the air can effectively inhibit and kill. dead.

From the perspective of the plant protection concept of “prevention first, comprehensive control”, prevention is the key, and the disinfectant fogging machine uses comprehensive medicine and produces water mist. The medicine can stay for a long time after application, and the bacteria in the air can be used. It can effectively kill, and at the same time, it can completely cover the front face, column, ground, wall, etc. of the shed, preventing the hiding of harmful viruses and bacteria, and avoiding the continuous development of diseases. Especially in densely farmed areas, ordinary sprays will have dead ends, but there is no need to worry about such problems when using the new fog machine.

Features of fog sprayer machine:

1. Both spraying smoke and water spray can be used.

2. High efficiency, time-saving, labor-saving, medicine-saving, high killing rate, long-range, strong penetrating power, and high safety factor.

3. All-round work without flameout, stable and reliable working performance, high power, long spray distance, and large action area. (Water mist diffuses up to 6 meters, and smoke diffuses up to 20 meters!)

4. Comprehensive spraying, no dead ends, good diffusion, high adhesion, long-lasting efficacy, and resistance to rain washing.

5. More thoughtful protection, dual throttle control, simpler operation, greater starting capacity, and power. The use of dual aluminum alloy fully self-priming special carburetor, dual throttle control, composite material pulse valve, so that the oil is easy to start, easy to operate, easy to maintain, and longer service life.

YG Machinery sells a variety of models of fog sprayer machine, such as backpack sprayer and portable. If you want to know more about the epidemic prevention equipment, you can send us your requirements by email. If you have any requirements, you can get in touch with us, and I will reply to you as soon as possible.

What are the indoor air disinfection methods?

Many people may think that we only need to clean our indoors. They don’t know if the indoor air is not disinfected, pollution is very serious. For example, when the human body breathes deeply, talks, or sneezes, bacteria and germs will pass through the human throat and then float in the air in the form of droplets. Especially when there are infectious patients in the home, the germs will infect family members. So, what are the indoor air disinfection methods?

1. Ventilation

To reduce indoor microorganisms, a simple and fast method is to regularly open doors and windows for ventilation. Studies have shown that microorganisms can be effectively reduced when indoor air is circulated with the outside world. Summer is relatively hot, and doors and windows need to be opened frequently for ventilation; as the winter climate is relatively cold, ventilation is sufficient twice a day.

2, air disinfection machine purification

Common air purification technologies include photocatalysts, negative ions, superstructure light mineralization technologies, etc. The use of air purifiers can quickly remove indoor viruses, molds, bacteria, allergens, etc., and can also absorb dust, oil smoke, second-hand smoke, etc. At the same time, the purification efficiency and effect are improved, which is beneficial to human health.

Features of air disinfection machine:

1. Efficient sterilization: The plasma sterilization effect is good, and the action time is short, which is far behind the high-intensity ultraviolet.

2. Environmental protection: Plasma sterilization and disinfection work continuously and will not produce ultraviolet rays and ozone, avoiding secondary pollution of the environment.

3. Efficient degradability: Plasma disinfection machine can also degrade harmful and toxic gases in the air while disinfecting the air. According to the test report of the Chinese Center for Disease Control and Prevention, the degradation rate within 24 hours: formaldehyde 91%, benzene 93%, 78% ammonia, 96% xylene. At the same time, it can efficiently remove pollutants such as smoke and smoke.

4. Low energy consumption: The power of the plasma air disinfection machine is 1/3 of that of the ultraviolet disinfection machine, which is very energy-efficient.

It is precise because of the rapid expansion of new coronary pneumonia that it is necessary to do personal protection, after all, there is no specific medicine now. Our YG Machinery has a variety of anti-epidemic equipment products, such as blu ray anion nano spray gun, electrostatic backpack sprayer, disinfection doordisinfection fogging machinefogging sanitizer machine, etc. to choose from.

What is the difference between a medical oxygen generator and a home oxygen concentrator?

At present, many people do not understand what kind of oxygen concentrator machine they should buy. As a result, they blindly follow the trend. The oxygen concentrator they bought is not suitable for their own use, or the home oxygen concentrator is used to assist medical treatment, which delays the opportunity for treatment and delays the condition. Either buy a medical oxygen concentrator for oxygen health care, which makes it too small to use and spends more money. In view of this situation, I will summarize the difference between a medical oxygen concentrator and a household oxygen concentrator. You may wish to buy an oxygen concentrator. Take it for reference.

The medical oxygen generator, as the name suggests, refers to the oxygen generator used to assist medical treatment. The oxygen produced by the medical oxygen generator must be above 90%, and the oxygen concentration above 90% can have medical functions. It is suitable for family personal oxygen therapy, Oxygen health care, and oxygen supply in small and medium-sized hospitals are ideal products to replace cylinder oxygen. Cooperate in the treatment of cardiovascular and cerebrovascular diseases, respiratory diseases, chronic pneumonia, and general hypoxia symptoms. The medical oxygen generator is suitable for all areas, such as remote areas, mountainous areas, and plateau areas and some small and medium-sized hospitals and health centers. It is also suitable for nursing homes, training centers, etc. The working principle of the medical oxygen generator is the PSA principle. The so-called PSA principle is the English abbreviation of the pressure swing adsorption principle, which is a pollution-free purely physical oxygen production method. The raw material required for oxygen production is the air around us. The oxygen produced has unparalleled advantages such as high concentration, naturalness, cleanliness, environmental protection, safety, and low cost of use.

Oxygen generator for home only have health care functions, but do not have medical effects. At present, most home oxygen concentrators on the market produce an oxygen concentration of about 30%. By inhaling oxygen, the health of the body can be improved to achieve oxygen supplementation and fitness. Purpose. It is especially suitable for people with poor physical fitness, elderly people, pregnant women, white-collar workers, teachers, mental workers, college entrance examination students, etc. Anyone who lacks oxygen can be used to enhance sleep quality after physical or mental exhaustion. Work efficiency, relieve fatigue, restore body functions, and enhance body immunity, all have a certain effect. It is not suitable for the elderly with cardiovascular disease, asthma, chronic pulmonary heart disease, and so on.

At present, there are many oxygen production principles of home oxygen concentrator, such as molecular sieve oxygen production, molecular membrane oxygen production, and chemical oxygen production. Therefore, when we purchase an oxygen concentrator, we must first figure out whether it is for health care or medical use so that we can effectively choose the model, function, and technical indicators of the oxygen concentrator. People of different physiques choose different The oxygen generator is the effective use of resources.

How to choose a home oxygen concentrator?

 Choose an oxygen concentrator machine for disease treatment, it is recommended not to buy a health-care oxygen generator, you need to buy a medical oxygen concentrator.

Although both health-care oxygen concentrators and medical oxygen concentrators can be called an oxygen concentrator machine, the therapeutic effects are very different. The most critical point is: Is the oxygen concentration of the oxygen generator stable? For many health-care oxygen generators, the oxygen concentration can reach more than 90% when you first buy it. If you keep it on for more than ten hours, the oxygen concentration will drop to less than 90%; Increase the oxygen flow rate, and decrease the oxygen concentration. For example, when the oxygen generator is turned on to 1L/min, the oxygen concentration can reach 90%. When the oxygen generator is adjusted to 3L/min, the oxygen concentration is only 60%. When it is adjusted to 5L/min, the oxygen concentration is only 50%; some oxygen generators can stabilize at 90% in the first year or six months after they are purchased. As the machine is used for longer, the oxygen concentration is Will be greatly reduced. The oxygen concentration of the oxygen generator needs to be stabilized above 90% in order to achieve the effect of curing diseases, but it is difficult for many health-care oxygen generators to achieve this.

Points to note when buying an oxygen compressor:

1. Whether the oxygen concentration can be stably and continuously above 90%. (It is best to choose an oxygen generator that can monitor the oxygen concentration in real-time)

2. Try to choose an oxygen generator with more filtration levels. (Many oxygen generators only have one-stage filtration or two-stage filtration. The higher the filtration level, the cleaner the oxygen produced will be, and the user will not easily cause secondary infections caused by oxygen inhalation)

3. Try to choose a low-noise oxygen generator. (The lower the noise decibel, the more comfortable the user will be. Most oxygen concentrators are at 45-50 decibels, and some oxygen concentrators can achieve about 40 decibels)

Henan YG Machinery is a company that sells home oxygen concentrators, medical oxygen concentrators, industrial oxygen generators. You can choose. You can contact me for more information about oxygen concentrators and quotations. I can give you the most competitive price.

What is the difference between a thermoplastic road marking and a line marking machine?

The most common road marking machines are thermoplastic road marking machines and cold spray marking machines. What are its advantages? How to choose? Let’s take a look at the thermoplastic road marking and the line marking machine. Let’s see who wins and who loses?

Thermoplastic road marking machine, a road construction machine that is widely used in roads, highways, parking lots, squares, and runways to draw different restrictions, guidelines, and warnings on flat ground. With its many advantages, the hot-melt marking machine has played a huge role in urban planning and highway construction, saving them time and economic investment of road construction to the greatest extent, and is deeply loved by road maintenance projects.

Features of thermoplastic road marking machine:

  1. Advanced technology: frame structure, multi-channel hydraulic control valve, stepless speed change, specially designed overload overflow device, multiple specifications, and models.
  2. Efficiency and energy saving: dual-purpose oil and gas, stainless steel pot wall, hydraulic single and double cylinder, multi-channel integrated control valve, hydraulic transmission system, air-cooled water-cooled engine, energy exhaustion device, energy-saving and more efficient
  3. Simple and convenient: efficient and energy-saving burner, time-saving and energy-saving, high melting efficiency, long continuous working time, simple operation, and convenient maintenance.

Features of line marking machine:

  1. Good effect and high efficiency: The cold spray marking machine has a good effect when used, and the marking is clear, smooth, and even, with high work efficiency, which greatly saves the working time of the staff.
  2. Flexible and reliable: It is a hand-push type walking, with the characteristics of free steering and flexibility, and reliable orientation. The spray gun can be disassembled freely, different nozzles can be replaced, and the width of the scribe line can be controlled to meet different application requirements.
  3. Advanced spray gun: There are stoppers on both sides of the spray gun, which can avoid the problem of line width and edge hair. Can be used for ordinary airless spraying for spraying marks or signs.

The thermoplastic road marking and line marking machine have their own advantages and disadvantages. In application, the hot-melt marking machine has a wide range of applications, and the cold-jet marking machine is lower in price. The specific choice depends on the actual situation. , The right choice is right. YG Machinery is a professional pavement machinery manufacturer, with various styles of pavement road marking machines, crack sealing machine, mini road rollers, etc. to choose from.

What are the precautions for well drilling equipment?

Water well drilling rig for sale is an important equipment used for drilling. Safety is the most important when using water well drilling rigs. Let’s take a look at some safety precautions when the water well drilling machines is working.

1. The single-point inclination measurement must be carried out after the kelly is drilled and not connected to a single one. The inclinometer shall move the drilling tool once every 1-2 minutes during the trip and the drilling distance shall not be less than 2 meters.

2. Frequently observe the weight indicator and pump pressure gauge values ​​during drilling, and find that the suspended weight decreases and the pump pressure drop to find the cause immediately, first look for the ground cause, and the ground cause has been eliminated but the ground cause has not returned to normal.

3. When drilling, you should pay attention to the amount of sand in the vibrating screen. If there is more sand, you should observe whether the sand sample collapses. It is discovered whether the sand reduction is due to changes in the performance of the drilling fluid and poor rock-carrying ability. Measures should be taken in time to deal with it.

4. After drilling down, the drill bit is more than 2-3 meters away from the bottom of the well (usually a single one is mentioned above) to start the pump, and the diesel engine rotates at 800-900 pm when the pump is started. The pump pressure at the edge of the riser rises to 5MPA and the pump is removed. After it is lowered, the pump is turned on again. Open the pump several times. After observing the drilling fluid returning from the wellhead, turn on the pump, and run continuously. The rotation speed of the diesel engine is adjusted to 1150-1200 rpm when drilling. After the pump pressure is stabilized, the drill bit is lowered to the bottom of the well at a slow speed and touches the formation smoothly with light pressure and slow rotation. The roller cone bit runs for 30 minutes, and the PDC bit drills in the bottom hole shape of 0.3 meters, and then drills normally according to the designed drilling parameters.

5. Sending drills: you must concentrate your mind, you can order or slip away. It is required to send the drill evenly, see the weight gauge, and observe the lowering speed of the drum or rope, so as to keep up with the drill pressure without slipping the drill. It is strictly forbidden to pressurize the drill bit to start the drilled disc.

6. Before connecting a single root, gradually reduce the weight on the bit, so that the drill has the maximum elongation, reduce the overpressure of the bit, and extend the use of the bit.

The above is a detailed introduction to some safety precautions of well drilling equipment when working. It is still necessary when working with water well drilling equipment. It can help us reduce the occurrence of safety accidents and ensure the safety of human life and property. We YG Machinery, are a professional manufacturer of drilling rig equipment. You can contact us if you need any information about drilling rig equipment.

What are the precautions for using the drill bit of the water well drilling rigs?

The drill bit plays a pivotal role in the drilling process of water well drilling rigs. The quality of a drill bit directly affects the efficiency of the water drilling rig and the quality of the hole, so we need to pay attention to the selection and use of the drill bit. During the drilling process, the operator should pay attention to the use of the drill bit to make the drill bit better for production operations. Several aspects that need to be paid attention to in the drill bit of the water well drilling rig for sale:   

  1. After the drill bit of the water well drilling machine is drilled into the structure, the center drilling tool needs to be replaced in time. First, the bottom of the hole needs to be cleaned, and then the residue at the bottom of the hole is blown clean. After the drill stops rotating, the drill in the water well drilling rig The tool is slowly lifted upwards. It is most suitable when the lifting force is just enough to lift the drill tool.
  1. The drill bit of the water well drilling machine is summarized during the drilling process. It is also necessary to pay careful attention to the follow-up situation of the casing, to understand the specific situation in the hole in time, and to keep the hole clean when necessary, and the drill bit in the water well drilling rig is on the rig During the process, strong lifting is prohibited. 
  1. Sometimes there is more residual slag at the bottom of the hole of the water drilling rig. The rotating part of the eccentric drill bit will be blocked by the slag, which will affect its gathering production. At this time, it is necessary to deliver compressed air and clean the hole again. , And make the down-the-hole hammer work for a short period of time, and then resume the lifting operation of the center drill.
    YG Machinery is a Chinese manufacturer specializing in the production and sale of well drilling equipment. It sells various types of water well drilling equipment with high quality and competitive prices. They are sold to various countries in the world, such as Thailand, South Africa, India, etc. any. If you have any needs, you can contact us.

Where can I buy disinfection channels?

A detailed description of temperature measurement and disinfection channel:

The intelligent temperature measurement and disinfection channel are mainly designed for factories, communities, shopping malls, schools, stations, airports, industrial areas, offices, communities, public management projects, etc., a temperature measurement atomization disinfection channel device that can effectively and accurately measure human body temperature, Spray hand disinfection and use an ultrasonic atomization elimination system, through the disinfection liquid atomization into 1-8 micron disinfection particles, which quickly attach to human clothing or the surface of objects, thereby eliminating the virus and effectively preventing the infection and spread of the virus To prevent cross-contact infection and ensure a good and safe working environment. To learn more about epidemic prevention equipment, you can get in touch with me. YG Machinery is a company selling a variety of epidemic prevention equipment such as a disinfection channel, disinfection door,  fog sprayer machinebackpack sprayer machine, etc.

Equipment use steps:

Plugin the power of the device, turn on the device power button, and the personnel enters the device to turn on the operating mode, automatically senses and accurately detects the temperature, whether to wear a mask, intelligent voice prompts, the next step enters the atomization area, the top 360-degree atomization starts automatically, The atomization ends within the set time, and the personnel walks out of the temperature measurement atomization disinfection channel, and the temperature measurement atomization disinfection is completed.

Control System:

Adopt advanced energy induction system, main control board functions: power-on button (equipment start-up), lighting button (equipment lighting), time up and down setting keys (adjust the length of the atomization time, 0-99 seconds, adjustable, smart cycle, no card machine)

The main function of temperature measurement:

Autonomous temperature measurement, mask recognition, abnormal alarm

Detection distance: 0.3-0.5M, detection accuracy: ±0.5 degrees

User capacity: 10,000 face capacity: 10,000

Recording capacity: 10000 sheets Palm capacity: 3000 sheets

Communication method: TCP/IP

Operating system: LINUX

Working temperature: 0C°-45°C

Working humidity: 20%RH-80%RH

Voice: Voice broadcast

Full scene recognition, with light supplement function

Atomization system:

Adopt ultrasonic atomization system, internal use integrated atomization movement, no mechanical drive, quiet and no noise, high atomization efficiency, low failure rate, simple maintenance, the output diameter of the whole machine is 1~10u, the maximum relative The humidity can reach 99%.

Atomizing nozzle:

Adopting an ABS plastic spherical nozzle, the nozzle diameter is 36mm, the outer diameter: 115mm, can be rotated at will, spray vertically, and the atomization effect is excellent.

What are the factors that affect the construction effect of the asphalt crack filler machine?

The asphalt crack filler machine must be grasped layer by layer during construction, paying attention to every detail, only to do the details well. crack sealing machine should not only do a reasonable construction but also consider the surrounding environment, so specific What are the factors that we need to consider?

1. The nature and density of road cracks

Because the degree of damage to the road is different during the passage of vehicles, the potting depth and the shape of the repaired pavement are very different. Estimating the number of materials required for the filling and sealing of the cracks in the asphalt pavement construction section will help We repair the road better.

2. Crack filling and sealing process of asphalt filling machine

According to the specific conditions of cracks and cracks in the asphalt pavement grouting construction section, we must learn to change the flexibility, and what kind of cracks are suitable for which repair methods should be flexibly mastered.

3. Flexible construction according to climatic conditions

The temperature is constantly changing throughout the year. During the construction of the asphalt pavement joints, the special climatic conditions on-site will also affect the selection of the craft. For example: In wet or low-temperature conditions, the construction progress may be delayed. At this time, high-temperature heating is required to help accelerate the operation process and ensure construction quality.

4. What kind of material to choose in the road repair process

We should choose toast and durable materials so that the traffic capacity can be improved during construction and the number of subsequent constructions can be reduced. The smaller the number of constructions, the shorter the occupation of the road, and the higher the safety.

The asphalt crack filler machine occupies an important position in our road maintenance. We must understand various construction factors during the construction process, carry out continuous induction and summary, and help our friends to better complete the construction. We YG Machinery, are a professional manufacturer of road machinery, asphalt equipment, road marking machines, and more mechanical products.

Why is the water well drilling rigs not suitable for use in the rainy season?

At present, more water well drilling rigs for sale are used in well drilling projects. In this project, the processing speed of water well drilling machine is also very important. Friends who understand this industry know that drilling wells should be avoided during the rainy season. Many people will ask why water well drilling rigs are not suitable for use. How about using it in the rainy season? YG well drilling rig for sale are sold for you to answer.

First, after the well is made, it is necessary to pump water to check the results. Under normal circumstances, a large drawdown pumping is sufficient, and the water level is stable for no less than eight hours. At the same time, the water flow rate of the dynamic water level of the well is measured. For large wells with water intake at the bottom of the well, the thickness of the filter layer and the particle size of the filter material should be constructed in accordance with the design requirements, and the bottom mud and sediment must be removed before the filter layer is laid. The filter material should be sieved to remove sludge and measured for use.

Then the well-drilling project must ensure the smooth drainage of the construction site, so the rainy season needs to be avoided. When digging while working, the excavation slope should be determined according to the physical and mechanical properties of the soil layer, generally 1:1.5, and there must be a certain distance from the spoil slope to the top of the excavation. For large wells with water intake from the shaft wall, the water inlet holes and filter layer of the shaft wall must be arranged in accordance with the design requirements, and the water inlet holes should be prevented from being blocked during the construction process. The filter material enclosing fill of the aquifer should meet the requirements, the backfill must have a certain super height, and the frozen soil in the backfill in winter shall not exceed 15%.

Of course, drilling a good well requires a professional team to check whether it is suitable for drilling. Secondly, you also need professional machines and teamwork to drill the well. The diameter of the well determines your water output; but it is not that the bigger the well, the better. This depends on the terrain and other factors. Decide how big the well can be.

Design a site like this with WordPress.com
Get started