Non-curing hot melt spraying machine has both scraping and spraying. It consists of burner, electric heating components, hot melt kettle, agitator, spray drive assembly and spray gun. By heating the paint and combining the principle of electric and mechanical transmission, the time-saving and labor-saving spraying effect of the construction can be achieved.

The machine has a wide range of applications, remote control, uniform spray coating. This spraying machine can improve the construction efficiency of non-curing coatings, keep the construction surface clean and save materials. And it has been greatly favored by major waterproof enterprises and suppliers. In the past, heat and stir non-cured coatings on construction site, and then hand-scraped or rolled on walls, floors, and roofs. But non-cured coatings are cooled quickly and had a small amount of smoke, which is easy to cause uneven coating thickness.

How to Use the Non-curing Spraying Machine?

1. Basic level processing: keep the roadbed surface firm, flat, clean before spraying non-curing coating.
2. Heat and melt rubber asphalt waterproof: heat the non-cured rubber asphalt waterproof coating to a liquid state in a heating tank. Only when the specified hot temperature reaches, workers can do next construction. The heating temperature of manual scraping should be greater than 120 Celsius degree, and the spraying appropriate temperature is 150 Celsius degree.
3. Spray non-cured paint: knife coating or spraying with machine the melting non-cured waterproof paint on the subgrade, the thickness is generally between 1.5-2mm. After spraying the non-curing rubber asphalt waterproof coating, roll the waterproofing coil within 3 minutes. So that the coil and non-cured rubber asphalt waterproof coating are firmly bonded together to form a full-stick waterproof system.

The asphalt crack sealer machine is special equipment used to melt the joint filling material and pour the material into the cracks to achieve the purpose of road maintenance. Highway cracks are one of the common road diseases. Irregular cracks on asphalt pavement and expansion joints of concrete pavement will cause large-scale damage to the road pavement if not repaired in time. Therefore, road maintenance and filling machines are very important.

YG Machinery is a professional road equipment manufacturer. Long-term supply of various mini road roller, road marking machine, manhole cover cutting machine, floor shot blaster, non-curing spraying machine, concrete laser screed for sale, and much other mechanical equipment. High quality, low price. Welcome new and old customers to purchase.

Advantages of Crack Filling Machine:

　　1. Heat conduction oil indirectly heats the material, circulating heat preservation, imported diesel burner as the heating source, the material is heated evenly, the intelligent sensor automatically detects the temperature, so that the material is not carbonized, invariable, and the melting time is short, which is economical, safe and environmentally friendly;

　　 2. Hand-held grouting, adjustable flow, flexible and convenient operation.

　　3. The heating temperature is automatically detected by the sensor and adjusted automatically, without flameout, which is convenient for long-term construction.

4. Asphalt material pump, with suction function, can be forward and reverse, the pump body is not blocked and easy to clean.

5. The humanized handle design of the grouting gun, equipped with an electric control switch on the handle of the grouting gun, which can remotely control the asphalt pump, avoiding waste, sanitation, and cleaning.

How much do you know about the manhole cover cutting machine? So, dear friends, do you know that the automatic manhole cover cutting machine of that manufacturer is easier to use? If you still don’t choose the manhole cover cutter, then you really need to learn it! The manhole cover cutting machine must not only choose the economical and affordable but also choose good performance. Where to use this product? We at YG Machinery will take everyone to understand the structural characteristics of the manhole cover cutting machine!

1. Multifunctional circular spherical surface slitting machine is suitable for cutting and repairing various cement concrete and asphalt pavements, for example: cutting around the manhole cover of urban roads;
2. Its unique circular cutting ability saves the trouble of multiple cross-destructive cutting by ordinary slitting machines, and its efficiency is more than 10 times that of ordinary slitting machines. Time-saving, labor-saving and material-saving construction;
3. The effect after construction: beautiful, durable, and strong.

4. The Japanese Honda 630 twin-cylinder engine is adopted, which is easy to start, small in size, flexible in movement, high in power and low in fuel consumption;
5. Remote control travel cutting, cutting depth and angle are easy to adjust;
6. The automatic manhole cover cutting machine adopts circular cutting to complete at one time, without destructive cutting; it saves time, labor and materials;
7. It comes with an optional chassis, which can be towed and loaded, and it is convenient to transfer.

The professional knapsack sprayer adopts electrostatic surrounding spray technology, has safety protection function, and can use continuously charged lithium battery as power source. Electrostatic spray head suitable for a variety of drugs. Compared with conventional sterilizers, the multifunctional electrostatic sprayer has better effects and higher drug utilization, thereby improving work efficiency and reducing environmental pollution. It can effectively solve the work in fields such as epidemic prevention, disinfection, sterilization, and deworming in medical and health, agriculture and other fields.

How Far will a Backpack Sprayer Spray?

The professional knapsack sprayer can be 0.5-1.5 meters in diameter according to the different nozzles, and the spray width varies according to the length of the spray rod, and can reach different spraying lengths. The width can reach 6-7 meters.

What are the Characteristics of Electrostatic Backpack Sprayers?

1. Because of the electrostatic adsorption effect, once the drop of medicine hits the target, it will be firmly adsorbed, so that germs, medical media, pests, etc. cannot get rid of, and it can better play the role of the liquid medicine;

2. Because of the enveloping effect of static electricity, the droplets can not only cover evenly on the surface of the target, but also reach the hidden parts of the target (including the back), so as not to leave dead corners, which is not possible with ordinary sprayers;

3. When spraying into the air, due to the tiny droplets, it stays in the air for a long time, leading to a long time for killing bacteria and flying insects in the air. These characteristics result in the electrostatic backpack sprayer having a better effect than general disinfection equipment and higher drug utilization rate, thereby improving work quality and efficiency, saving medication, and reducing environmental pollution.

The blu ray anion nano spray gun has the characteristics of active defense, continuous effectiveness, and harmless to the human body. Through the continuous generation of disinfectant spray in the air, the air and the surface of objects in the environment can be disinfected to create a safe and high-quality environment for everyone.

The general portable sprayer on the market is basically not very effective, because its degree of atomization of the disinfectant is relatively small, and it cannot float in the air for a long time. It can only disinfect the ground. The atomizing sterilizing machine can the disinfectant is atomized to mist particles below 30 microns, so that the disinfectant will float in the air for a long time, and it will be combined with the virus for a long time, and the disinfection effect will be better.

The gun portable atomization sterilizer uses the principle of airflow atomization to spray the liquid medicine at high speed and extremely fine mist particles. It is easy to operate, and it is convenient for the user to carry and replace the liquid medicine, and can perform various angles on the surface of the object and the fabric at will for spray disinfection, extremely fine aerosol mist particles can pass over the surface of the object to achieve sufficient disinfection and sterilization.

YG Machinery provides a variety of disinfection atomizers to meet the needs of different fields. For example mist machine, electrostatic sprayer, atomizer. Our company also has a disinfection door, disinfection channel, professional backpack sprayer. If you have any needs, you can leave a message, and we will answer you in time.

Gloves play an indelible role in many different industries and lives. YG is a manufacturer of glove production lines with various types of glove manfacturing machine. According to the material, it is mainly divided into a latex glove making machine, nitrile glove machine, PE glove making machine, labor protection glove machine. According to the performance of the machine, it can be divided into automatic glove machine and computer glove machine. If you have someone’s needs, you can contact us, we will provide you with high-quality and competitive prices.

Nitrile Glove Machine

Nitrile gloves are mainly used in industries: chemical, pharmaceutical, maintenance, automotive and transportation, metal processing, construction and engineering, and property services.

Protection features: These gloves are designed to protect products and workers in environments with special management requirements. These gloves have characteristics that are compatible with various uses, including medical laboratories, clean rooms, electronics.

Latex Glove Making Machine

Latex gloves are mainly used in industries: automotive and transportation, metal processing, glass, machinery and equipment, construction and engineering, logistics and warehousing, electronics 

 Protective features: These gloves are designed to prevent cutting, abrasion, and puncture, and provide gripping properties for handling materials in dry or wet environments. These gloves also have different degrees of liquid permeability and various special properties, while having both dexterity and comfort.

PE (plastic) Glove Making Machine

PE gloves, also known as disposable plastic gloves, are more widely used. They are often used in household cleaning, laboratory testing, mechanical gardening, food, hygiene, and industrial and agricultural protection, hair dyeing, care washing, dining, and so on. Almost all the disposable transparent gloves seen in daily life are PE gloves. It is an ideal machine for gloves used in fast-food restaurants.

Protection features: These gloves are designed to protect products for food use or the processing industry.

There are many kinds of household oxygen concentrators machines on the market. Due to the different principles of oxygen production, the operating characteristics of the oxygen concentrators machine of various manufacturers are also different. Today we will talk about the role of the oxygen generator machine?

• 

• 

1. Can make people full of energy

The operation of the brain has a lot to do with oxygen. Insufficient oxygen supply can easily cause dizziness, forgetfulness, insomnia, and other symptoms. Oxygen therapy can effectively improve these symptoms.

2. Prevent the occurrence of diseases

Oxygen is the foundation of human beings. A major cause of respiratory diseases is the lack of oxygen in the human body. Oxygen concentrators can effectively prevent chronic diseases caused by hypoxia.

3. Contribute to beauty and beauty

Oxygen inhalation can enhance the aerobic metabolism of human cells, increase skin nutrition, increase the elasticity of loose skin, and reduce wrinkles. The metabolism of skin cells is enhanced.

4. Improve the body’s immunity.

Oxygen inhalation can enhance the material metabolism of human cells, tissues, and organs, enhance the function of various organs and improve the body’s immunity.

5. The oxygen generator is suitable for small and medium-sized hospitals, clinics, health stations, etc. in cities, villages, remote areas, mountainous areas, plateaus, etc. It is also suitable for nursing homes, home oxygen therapy, sports training centers, plateau military stations, and other oxygen-using places.

• 

• 

The Main Function

Medical function: By supplying oxygen to patients, it can cooperate with the treatment of cardiovascular, cerebrovascular, respiratory system, chronic obstructive pneumonia, and other diseases, as well as gas poisoning and other severe hypoxia symptoms.

Health care function: Improve the oxygen supply status of the body by supplying oxygen to achieve the purpose of oxygen supplement and health care. It is suitable for middle-aged and elderly people, people with poor physical fitness, pregnant women, college entrance examination students, and other people with varying degrees of hypoxia. It can also be used to eliminate fatigue and restore physical functions after heavy physical or mental exhaustion.

• 

• 

Product Features of the Oxygen Generator Machine

The household oxygen concentrator machine is easy to use, portable, and suitable for health care users. The dual-purpose vehicle-mounted home can be used both at home and in the car with car power. Oxygen is a colorless and odorless gas. It is an important substance for the human body to survive, and it is also an important substance for other animals and plants to survive. Without oxygen, there will be no life and no life in nature. Its importance is as much as water. It is widely used, and oxygen is inseparable from all walks of life, including medical care and beauty care.

Friends, who want to do wet wipe processing have many questions about the wet wipe processing industry, such as how much does a wet wipe machine cost? If you want to invest in a wet tissue production line, the necessary machines are wet wipe machine, wet tissue packaging machine, and wet tissue folding machine. It can meet the needs of the daily sales of a small wet wipes processing factory.

• 

• 

Wet wipes have become an indispensable item in daily life. Wet wipes have a low failure rate and simple operation. It is a kind of equipment that can quickly return on investment. However, there are many manufacturers of wet tissue machines on the market, and the mechanical quality is also uneven. The wet tissue machines are divided into two types: automatic wet tissue machines and semi-automatic wet tissue machines. The styles are divided into single piece wet tissue machine, 5-30 piece wet tissue machine, 30-120 piece wet tissue machine. The price of each model of the machine is actually different, and the technicality is also different. Of course, the price difference is still relatively large.

• 

• 

YG company specializes in manufacturing wet wipe machines. We have a series of wet wipe production lines with different specifications. For example, fully automatic high-speed wet tissue machine. Automatic splicing high-speed wet wipe making machine. Wet paper towel folding machine. Wet wipe packaging machine. According to the quantity of each pack of wet tissues, we have single-bag wet tissue machines, 5-30 wet tissue machines, and 30-120 wet tissue machines. According to the degree of automation, there are fully automatic wet tissue machines and semi-automatic wet tissue production lines. If you are looking for a baby wipes machine or adult wipes machine, YG will be your ideal partner. Please feel free to leave your request.

You must want to say: “It was blown up. Don’t even think about it.” That’s right. But have you ever wondered how it was exploded? Let me tell you, there is a device called a fully automatic French fries making machine, which is produced through multiple processes.

• 

• 

The first process of fries is the on-line of potatoes. Its function is actually to store the potatoes and make the potatoes run on the assembly line in an orderly manner to the next process.
The second process of French fries is peeling and cleaning, which is to use a hair roller cleaning machine to clean the soil on the surface of the potatoes. Then remove the potato skins.
The third process of fries is selection, and the selected equipment is entered after cleaning. It is to put potatoes on the assembly line to select whether there are bad, rotten potatoes. Even if it is sorted out, it prevents it from flowing into the next process.
The fourth process of French fries is cutting into strips. The selected potatoes will go directly to the cutting machine to prepare for cutting. The fries shape will be completed in no time.
The fifth process of French fries is cleaning. The cut fries will enter the bubble cleaning machine to clean the remaining soil and potato starch. Keep the potatoes no longer sticky.
The sixth process is blanching. What is blanching is that the potatoes are not raw.

• 

• 

The seventh process is air-drying, to dry all the water on the surface of the fries, and make the surface of the water jacket as dry as possible.
This time is the focus of fries. For frying, the potato strips from the air-drying line enter the fryer to start the fryer. The full-line temperature control of the fryer can ensure that the temperature of the French fries entering the fryer is kept at low temperature at all times. Reduce the production of carcinogens.
The fried French fries have not completed all the processes, and they need to be cooled-quick freezing-packaging before entering the fast-food restaurant. When you order a French fries, the staff will take out the package in the background The French fries are deep-fried a second time before they reach your hands. This is the whole process of French fries making machine.

Nitrile gloves and latex gloves have a wide range of uses in industrial production, but because they are all disposable gloves, many people do not know the difference between the two. Nitrile gloves and latex gloves can be distinguished from the following nine aspects:

1. Material Difference

Latex gloves are also called rubber gloves. Latex is a natural material, derived from rubber tree sap. Natural latex is a biosynthetic product. Due to different tree species, geology, climate, and other related conditions, its composition and structure will often vary greatly. In the fresh latex without any substance, the rubber hydrocarbon only accounts for 20%-40% of the total, and the remaining small amount is non-rubber components and water. Non-rubber components include protein, lipids, sugars, and inorganic components. Some of them form a composite structure with rubber particles, and some are dissolved in whey or form non-rubber particles.

Nitrile is a kind of artificial rubber, mainly synthesized from acrylonitrile and butadiene, and is a key material for organic synthesis and pharmaceutical intermediates.

• 

2. Classification Difference

Latex gloves are divided into the powder-normal type and powder-free purification type, smooth and pitted surface slip resistance.

The nitrile glove model is divided into non-slip palm numb surface and hand tip numb surface non-slip, overall numb surface non-slip, generally powder-free.

3. Anti-allergic

Latex gloves contain protein, and people who are prone to allergies are prone to allergic reactions.

Nitrile gloves do not contain protein, amino compounds, and other harmful substances, and rarely cause allergies.

4. Degradability

Both latex gloves and nitrile gloves are degradable, easy to handle, and environmentally friendly.

• 

5. Puncture Resistance

The toughness and abrasion resistance of latex gloves are slightly inferior to those of nitrile gloves.

The puncture resistance of nitrile gloves is three to five times higher than latex. For dentists who need to use sharp tools, the use of durable nitrile gloves can create a safer barrier in contact with patients.

6, Flexibility

Latex gloves are soft and wear-resistant and have better elasticity than nitrile gloves.

7. Fit the Hand

Because the nitrile glove contains a butadiene monomer, it can be a flexible rubber, which allows the wearer to experience the best tactile sensitivity. In addition, the fit hand shape is due to its good thermal conductivity, which provides excellent flexibility, which is particularly important for medical professionals or those who operate small parts or tools.

8. Price

Because the nitrile material is much better than latex in chemical resistance, acid and alkali resistance, the price of nitrile gloves is higher than latex products.

• 

9. Color

The nitrile material can be added with pigments and the color is brighter. Can relieve the nervousness of patients.

In addition, nitrile gloves have certain antistatic properties due to their non-silicon content, low surface chemical residues, low ion content, and small particle content, and are suitable for strict cleanroom environments.

In summary, gloves are not absolutely good or bad. People can choose gloves that suit them according to their needs when using them.