In recent years, with the development of society, due to the improvement of living standards, air pollution has become more and more serious, people suffering from cardiovascular and cerebrovascular diseases, coronary heart disease, cerebral thrombosis, hypertension, pneumonia, bronchitis, asthma or pulmonary heart disease. Increasing. Although these patients can be basically controlled after treatment, they need long-term oxygen therapy to ensure their quality of life due to chronic respiratory insufficiency. Due to various reasons, many people cannot often go to the hospital for oxygen therapy, or to save costs and avoid nosocomial infections, they often choose to perform oxygen therapy at home.

Home oxygen therapy has brought good news to patients with chronic obstructive pulmonary disease or pulmonary heart disease who need long-term oxygen therapy, but it also brings problems. Because there are many types and brands of oxygen generators in the market, many people don’t know how to choose a household treatment type oxygen generator.

• 

• 

Choosing a therapeutic home oxygen generator

If you want to treat diseases, you cannot choose an ordinary oxygen generator machine, because the oxygen concentration of an ordinary oxygen generator machine cannot achieve the effect of curing diseases. It is recommended that patients who need long-term oxygen therapy choose a therapeutic medical oxygen generator so that the therapeutic effect can be guaranteed and the physical condition can be improved. Oxygen concentrators that can achieve therapeutic effects in the market are all above 5L.

The principle of oxygen concentrator

At present, there are three types of home therapeutic medical oxygen generators in the market: electronic oxygen generators, chemical oxygen concentrators, and molecular sieve oxygen generators. Before purchasing a household oxygen generator, we must first understand the oxygen generation principles of several oxygen generators.

1. Electronic oxygen generator: The electronic oxygen concentrator uses the process of oxidizing and reducing the oxygen in the air in a solution to precipitate oxygen. Although the oxygen generator of this process has the characteristic of a large oxygen supply per unit of time, such products have very high requirements for air purification, and the oxygen purity is difficult to meet the requirements of medical oxygen. Moreover, the product cannot be tilted or turned upside down during use, otherwise, it will cause more serious consequences.

• 

• 

2. Chemical oxygen generator: The chemical oxygen generator relies on adding an oxygen generator such as sodium peroxide to the water to produce oxygen under the action of a catalyst. This oxygen production method is not only troublesome but also expensive to use.

3. Molecular sieve oxygen generator: molecular sieve oxygen generator uses a relatively advanced molecular sieve pressure swing adsorption (PSA) process, which has a high oxygen concentration in the oxygen generator, and the molecular sieve oxygen generator is currently the only mature Yes, an oxygen generator with international standards.

At present, most of the oxygen generators on the market have a nominal oxygen concentration of more than 90% in the promotional instructions. All of us must pay attention here, there will be partial oxygen generators, the nominal oxygen concentration of 90% is the flow rate of 1L/min. As the flow rate increases, the oxygen concentration drops immediately. Be sure to pay attention to this before buying.

The rock splitter machine is suitable for silent mining of various rocks, such as granite, volcanic rock, quartzite, basalt, quartzite, siliceous schist, sandstone, limestone, marble, dolomite, pyrite, etc. A large amount of stone is mined silently, the breaking hammer cannot be moved, and the expansion agent is inseparable. The hydraulic rock splitter machine is a wise choice.

The hydraulic rock splitter machine is composed of two parts: a hydraulic pump station and a splitting rod. The principle of the hydraulic splitting machine is that the high-pressure oil output by the hydraulic pump station drives the cylinder to produce a huge driving force, and pushes the movable plunger jack on the rock splitter machine to move outward, so that the force generated by the plunger jack acts on the split body In the hole wall, the rock splits in a predetermined direction under a huge force.

• 

• 

The construction operation using hydraulic rock splitter machine is actually very simple. First use the drilling machine to drill the rock. The diameter of the hole is determined according to the model of the rock splitter machine. The hole spacing and row spacing can be adjusted appropriately according to the rock hardness, generally 1.5 meters. To 2.5 meters. After drilling the hole, put the rock splitter machine into the hole, start the hydraulic main engine to open the hydraulic valve and start to apply pressure. It only takes more than a minute to split the rock; the rock splitter machine is put forward after splitting, and the excavator breaks the hammer directly. That’s it.

• 

• 

Advantages of hydraulic rock splitter machine:

1. Safety hydraulic rock splitter machine utilizes the physical properties of hydraulic oil to be incompressible and flowable, and adds static thrust to achieve static controllable work. Therefore, there is no need to take complex safety measures, and it will not cause some hidden dangers like blasting and other impact demolition and rock drilling equipment.

2. Environmental protection, green and environmental protection demolition expert—hydraulic splitting machine will not produce vibration, impact, noise, dust, etc. when working, and the surrounding environment will not be affected. Even in densely populated areas or indoors, in urban construction, and close to equipment, you can work without interference.

3. Economical hydraulic splitting machine has a large splitting force (maximum splitting force can reach 5000T), so it only takes a few seconds to work at a time, and it can work continuously without interruption, with high efficiency; there is no need to take isolation or other time-consuming methods like blasting operations. And expensive security measures.

• 

• 

4. Flexible use The hydraulic rock splitter is simple and easy to learn, requiring only one person to operate it; it can be easily dismantled and split indoors or in narrow venues; it can also be operated underwater. Convenient maintenance and long service life.

5. Accuracy: Unlike most traditional dismantling methods and equipment, hydraulic rock splitter can accurately determine the splitting direction in advance, and can accurately dismantle and split according to the required split shape and the size of the part to be removed.

The rock splitter machine is suitable for use on flat construction sites, and can also be used for rock structures with layers. The rock splitter machine is suitable for use on construction sites with complex construction environments! However, the rock structure must be tight. If the rock with interlayer is used with splitting rods, the effect will not be better than the rock splitter machine. Therefore, the splitting machine or the splitting rod should be selected according to the conditions of the respective construction site and the rock structure!

The fog cannon dust suppression is based on the principle of air delivery. It uses a high-pressure pump and a fine atomizing nozzle to atomize the water, and then uses the air volume and pressure of the fan to transmit the atomized water mist to a long distance so that the water mist can reach a long distance. dust suppression cannon

In a relatively large area, the sprayed tiny artificial fog particles will float in the air for a period of time. The length of the fog generated by a single nozzle of the fog cannon machine can reach 3-5 meters, the width of the fog is 1-2 meters, and the water mist and dust will condense. After landing, in order to achieve the purpose of dust reduction. At present, in many open-air storage yards and workplaces, operation dust and local dust are difficult to control dust. In the past, many companies used water spray treatment, but problems such as small coverage areas and large water consumption made the effectiveness of water spray treatment less effective. ideal. The sprayed water mist and the PM2.5 and PM10 dust particles suspended in the air absorb, gather and settle to achieve the purpose of reducing pollutants and reducing smog. The water consumption is 2% of the traditional sprinkler nozzle. ~30%, while the spray area is more than 20 times higher. According to relevant data, when the fog cannon machine is put into dust reduction treatment, PM10 in the air is reduced by 10%-20%, and PM2.5 is reduced by 3%-5%.

• 

• 

Features of fog cannon machine:

1. The fog cannon machine can be equipped with the vehicle, it is flexible and flexible, the structure is tight, the layout is reasonable, the parts are exquisite, the product configuration is perfect, and the operation is simple;

2. Long-range, large coverage area, small sprayed water mist particles, rapid contact with dust in the air, and form a moist mist, which increases the weight of the dust, accelerates the dust settling, and inhibits the spread of dust;

3. Wide application, strong working ability, vehicle-mounted dust suppression cannon can spray while driving (selected according to the model), fast spray speed, strong penetration to dust and fog adhesion, can effectively save water and reduce environmental pollution;

4. Remote control/manual control compatible, quick start, safe to use, flexible and convenient;

5. The purifier controlled by the microcomputer can realize automatic horizontal rotation ±180. (In this range, the angle can be adjusted according to user requirements), convenient spraying, large coverage area; hydraulic system controls the pitch angle (-10°～55°), which can easily adjust the spray height.

• 

• 

fog cannon machine manufacturer-Chinese manufacturer

The fog cannon machine mainly uses the water mist sprayed by the high-pressure atomization device to combine with the dust particles in the air and agglomerate into clusters, and finally fall to the ground under the action of gravity to achieve the purpose of dust removal. The smaller the water mist particles, the better the dust removal effect. , The fog cannon dust suppression produced by YG Machinery has a water fog of 10~150 microns and 30-150 meters, which has a wider range of applications. There is also a fog cannon truck for sale. The dust removal efficiency is relatively high.

The serious air pollution in modern cities reduces the amount of oxygen that can be absorbed into the body. The appearance and health of white-collar women living in this environment will be seriously threatened. Hypoxia will be one of the main causes of many diseases, so enough oxygen It is very important for beauty. So, what is the principle of an oxygen generator machine? What is a PSA oxygen generator?

The oxygen generator has the function of health care. It can improve the oxygen supply status of the body by supplying oxygen to achieve the purpose of oxygen supplement and health care. It is suitable for middle-aged and elderly people, people with poor physical fitness, pregnant women, college entrance examination students, and other people with varying degrees of hypoxia. It can also be used to eliminate fatigue and restore physical functions after heavy physical or mental exhaustion. The principle of oxygen generator: In a medical oxygen generator, a molecular sieve discharges the adsorbed nitrogen back into the ambient air during decompression, and can adsorb nitrogen and produce oxygen during the next pressurization. The whole process is a periodic dynamic cycle process. Molecular sieves are not consumed.

• 

• 

What is a PSA oxygen generator?

PSA oxygen generator uses pressure swing adsorption technology, namely PSA technology, to desorb high-concentration medical oxygen with air as raw material. After the raw material air is pressurized by an oil-free compressor, it passes through an air filter device to remove dust and other solid impurities. The processed compressed air enters the adsorption tower equipped with desiccant and molecular sieve through the intake valve, and the nitrogen and carbon dioxide in the air is removed. Adsorption, the outflow gas is high-purity oxygen. When the adsorption tower reaches a certain degree of saturation, the inlet valve is closed, the exhaust valve is opened, and the adsorption tower enters the release flushing stage. After that, the exhaust valve is closed and the desorption valve is opened to enter desorption. In the regeneration phase, a cycle is completed in this way. Two adsorption towers carry out the same cycle process respectively, so as to realize continuous oxygen supply.

• 

• 

  Compared with the traditional chemical oxygen production method or relying on oxygen cylinders to absorb oxygen, the PSA oxygen generator has the characteristics of economy and safety. The raw material of the PSA oxygen generator is air, and the only thing that needs to be consumed is electricity, and the PSA (pressure swing adsorption) technology is Purely physical, so it is safer. When the power is turned on, high-concentration, dust-free, and sterile medical oxygen can be continuously separated from the air immediately.

Road roller machine is an important part of road construction, and rollers of different tonnage have different uses. The small road roller is more suitable for small-area sidewalks and communities. The large road roller machine is mainly suitable for the engineering construction of highways and airports, and can even work in the plateau environment. Let’s take a look at the tonnage classification of road roller machine.

mini road roller

Mini road roller is a small car and hand-held single and double steel wheel vibration road roller. It is suitable for compaction work of all kinds of small earthwork and pavement engineering. It is especially suitable for small engineering work such as road closing, residential road surface, sidewalk, pipeline backfill compaction, groove compaction, and so on.

• 

• 

Walk-behind Road roller

The whole walk-behind road roller has a beautiful appearance, compact structure, and small volume, which can be used for compaction operations in narrow areas. Optional high-quality HONDA gasoline engine, reliable performance, stable quality, low fuel consumption, easy to use and maintain. It is suitable for pavement work such as municipal roads, highway maintenance, building construction, and pipeline backfilling.

mini roller compactor

The mini roller compactor adopts CF186F vertical direct injection air-cooled engine, with two sets of starting devices, an electric starter, and a hand-pull starter. Equipped with guide wheels and operating rods, the steering is labor-saving, and the operation is comfortable and convenient. Hydraulic travel, using imported travel pump and travel motor, without variable speed.

• 

• 

3-ton double steel wheel small vibratory road roller

This type of machine is a hydraulic machine, the hydraulic components are all imported hydraulic components provided by the international hydraulic manufacturer to ensure the quality of the product. Optional high-quality engine, large reserve power, reliable performance, stable quality, low fuel consumption, easy to use and maintain. small vibratory road roller machine has a zero-degree suspension designed for front and rear, both of which can provide tight compression, and a small limit of the lateral suspension allows the operator to compress the edge asphalt, thereby improving productivity and polishing quality.

• 

• 

2 ton double steel wheel small vibratory roller

Hydraulic drive, stable performance, safe and reliable. There is no speed change, the vehicle speed can be controlled freely, and the operation is simple. Hydraulic vibration, strong excitation force and high compaction. Articulated steering, maneuverability and flexibility, high work efficiency, and good economic performance. Open the hood for easy maintenance. It has a wide range of operations, not only for compacting bitumen pavements, but also for compacting roadbeds and filling materials.

In summary, we can see that the roller compactor tonnage is clearly classified, and the difference is still relatively large. You can choose the road roller machine with the appropriate tonnage according to different applicable environments. If you have any questions about the tonnage of road roller machine, please call Henan YG Machinery.

The fog cannon machine is based on the principle of air delivery. It uses a high-pressure pump and a fine atomizing nozzle to atomize the water, and then uses the air volume and pressure of the fan to transmit the atomized water mist to a long distance, so that the water mist can reach a long distance. Fog cannon dust suppression The tiny artificial fog particles ejected from a relatively large area will float in the air for a period of time. The length of the mist generated by a single nozzle can reach 3-5 meters, the width of the mist is 1-2 meters, and the water mist and dust will condense in the air. After landing, in order to achieve the purpose of dust reduction. At present, fog cannon dust suppression is a problem in many open-air storage yards and workplaces. Operational dust and local dust are the problems of dust control. In the past, many companies used water spray treatment, but the small coverage area and large water consumption caused problems such as water spraying. The effectiveness of governance is unsatisfactory.

The water mist sprayed by the dust suppression cannon and the PM2.5 and PM10 dust particles suspended in the air adsorb, aggregate and settle to achieve the purpose of reducing pollutants and reducing smog. The spray water consumption is 2~ of the traditional sprinkler nozzle. 30%, and the spray area is more than 20 times higher. According to relevant data, when the fog cannon machine is put into dust reduction treatment, PM10 in the air is reduced by 10%-20%, and PM2.5 is reduced by 3%-5%.

• 

• 

Structure of Fog Cannon Dust Suppression

The components of the fog cannon machine include: base, high-pressure pump, fan, control equipment and so on. The fan is the main component of fog cannon dust suppression. The fan consists of a duct, a spray ring (nozzle), fan blades and a motor. The choice of the fan directly affects the working efficiency and atomization effect of the fog gun. The fog cannon machine relies on the airflow sprayed by the fan to further break and atomize the droplets, and make the droplets have kinetic energy that can penetrate the dust. In this way, the mist droplets accompanying the micro gas injection are filled between the dust particles and fall together with the dust. The fan of fog cannon dust suppression is an axial fan. Its air volume is relatively large, the efficiency is relatively high, the wind speed is relatively soft and uniform, the spray range is large, and the range is relatively long. It is one of the main components of the dust removal fog cannon.

• 

• 

Fog Cannon Turck-Manufacturer

YG Machinery, as a professional fog cannon manufacturer, produces dust suppression truckvehicles with excellent performance, high-pressure water mist for dust reduction, high efficiency, energy saving and water saving. The spray radius is 30 meters, 40 meters, 50 meters, 60 meters, 70 meters, 80 meters, Different specifications such as 100 meters, 120 meters, and 150 meters. We look forward to your visit to our factory to inspect the production strength and product technology, and provide you with high-quality service, no middlemen, no price difference, one-step price, quality assurance, and one-to-one tracking after-sales service!

The wet sand blasting machine is different from the traditional dry sand blasting method. The water sand blasting machine puts the abrasive in the water, and uses the abrasive pump and compressed air to spray the abrasive at high speed to the workpiece to be processed. The overview is cleaned up and polished. The wet sand blasting machine has high sand blasting efficiency and low abrasive loss, which can achieve the purpose of improving the smoothness and strength of the workpiece profile. The wet sand blasting machine uses tap water and natural sand (pills) as the wet sand blasting machine. It is a cycle of work, so there is no dust, no toxic waste water, no pollution to the environment, and equipment installation. Convenient and simple, no separate workshop is required.

• 

• 

The box-type liquid sandblasting machine produced by YG Machinery, after sandblasting the mechanical parts, can basically improve the appearance of the mechanical parts by 0.5 to 2.0 grades. If different shot materials are used, the mechanical The parts are finished in bright or matt finish. The water sand blasting machine is one of the most ideal ways to polish and decorate objects.

The water sand blasting machine can clean the rough profile of stainless steel welded parts, heat treatment parts, stamping parts and machined parts, remove residual salt and burrs, and be used for pre-processing procedures before spraying and electroplating;

• 

• 

The wet sand blasting machine also dips and blasts glass shots and strengthens the overview of the light decoration parts;

The wet sand blasting machine is suitable for the production of single-piece small batches of medium and medium parts, with high quality and high efficiency;

The water sand blasting machine is suitable for watchband factories, glasses factories, jewelry factories, electronics factories, etc.

The water sandblasting machine adopts siphon sandblasting, and the operation compresses the high-speed flow in the sandblasting to form a negative pressure to cause injection and impregnation. Sandblasting to the profile of the workpiece to achieve the purpose of sandblasting.

The operation of the concrete mortar spraying machine is very simple. When plastering works manually, trolleys, elevators and other equipment are also needed, while the mortar spraying machine does not require scaffolding or any mobile equipment, and can freely spray on the yin and yang corners and the roof. Using concrete mortar spraying machine can not only shorten the construction period, but also save other costs. Cement sprayer machine products are mainly used for building interior and exterior walls, cement mortar spraying, exterior wall insulation material mortar spraying, and refractory spraying. One machine is multi-purpose, can spray mortar, waterproof coating, refractory materials, and is not affected by regional and environmental conditions and the shape of the spray surface.

• 

• 

Advantages of cement sprayer machine

1. The mortar sprayers have reasonable design, integrated pump and compressor, and convenient to move.

2. The cement plaster spray machine has continuous feeding and no pulse phenomenon. The mortar spraying machine has wide practicability.

3. Mortar sprayers spray evenly and have strong adhesion.

4. The cement sprayer machine has complete functions. It can spray and spray the spray gun and the nozzle can be connected in any direction, which is convenient for operation.

5. In addition to the switch on the electric control box, it is also equipped with a remote control switch for spraying.

6. The connection between the spray gun and the feeding pipe can be rotated for easy operation. The construction efficiency is high and the quality is good.

7. Small size, easy to carry on site, and low cost of accessories, simple maintenance.

8. Easy to use, fast, save materials, labor, and more money, one machine only has three people, 150 square meters per hour (thickness 50px).

• 

• 

Installation and inspection of cement mortar spraying machine

1. Installation

Install and connect the parts and auxiliary accessories of the prepared cement sprayer machine correctly.

2. Check

After the cement mortar spraying machine is installed and connected, it is ready to be sprayed. Before spraying, check whether the power source is operating normally, and then suck in the paint, check whether the high-pressure paint cylinder is pressurized properly, whether the conveying hose is leaking, and whether the connection between the accessories is tight. Whether the spray gun and filter are clogged, etc. Find faults and eliminate them in time.

3. Control of painting environmental conditions

Measure the temperature and humidity of the spraying environment, and meet the coating conditions, and the coating operation can be performed. An outdoor painting should also consider weather factors. During a period of time from spraying to drying of the coating surface, rain and weather with high wind speed and heavy sand should be avoided.

Sandblasting machine uses compressed air as power to form a high-speed jet beam to spray materials (shot peened glass beads, steel shot, steel sand, quartz sand, emery, iron sand, sea sand) on the surface of the workpiece to be processed at high speed to make the workpiece The mechanical properties of the outer surface of the surface change. Due to the impact and cutting action of the abrasive on the surface of the workpiece, the surface of the workpiece obtains a certain degree of cleanliness and different roughness, so that the mechanical properties of the surface of the workpiece are improved, thereby improving the workpiece Fatigue resistance increases the adhesion between it and the coating, prolongs the durability of the coating film, is also conducive to the leveling and decoration of the coating, removes impurities, variegated colors and oxide layers on the surface, and makes the medium The surface roughening can make the residual stress on the surface of the substrate and increase the surface hardness of the substrate.

• 

• 

Choose the method of portable sand blasting machine:

1. Depending on the size of the workpiece, choose box sandblasting machine, mobile sandblasting equipment, and automatic sandblasting machine;

2. Depending on the shape of the product, choose the specifications of the sand blasting machine. Generally, there are fixed specifications for the one-meter or less, and the especially large ones should be customized or open.

3. The degree of product surface requirements depends on whether it is dry spray or wet spray. If it is dry spray, there are many options for abrasives, and wet spray is generally glass sand.

4. Some accessories of sandblasting machine should be familiar with. Sandblasting gun and sandblasting gloves are things that need to be changed frequently, because sandblasting is actually very worn out.

• 

• 

The choice of sandblasting machine?

Generally speaking, the blasting effect is mainly determined by the blasting medium (abrasive). The range can range from strong metallic abrasives to soft resin abrasives. At the same time, dry blasting and wet blasting are also important considerations. Customers can bring workpiece samples to determine.

According to the processing capacity, choose automatic sandblasting production line, semi-automatic sandblasting equipment, pressure sandblasting machine, and general pressure sandblasting machine. Choose the size of the cabin according to the size of the workpiece so that there is enough space to complete the processing work. Determine the air compressor capacity according to the equipment specifications, and leave a 20% margin to protect the service life of the air compressor. When you choose sandblasting equipment, you should consider the professional knowledge and experience of the seller or manufacturer. A good supplier can provide you with effective guidance and after-sales service.

• 

• 

Features of automatic sandblaster:

1. The metal parts of the sandblasting machine are basically not damaged, and the dimensional accuracy will not change;

2. The surface of the part is not contaminated, and the abrasive will not chemically react with the material of the part;

3. The portable sand blasting machine can easily handle grooves, cavities and other difficult-to-contact parts, and a variety of abrasives can be selected for use;

4. The processing cost is greatly reduced, which is mainly reflected in the improvement of the work efficiency of the sandblasting machine, which can meet various surface finishing requirements;

5. Low energy consumption and low cost;

6. The sandblasting machine does not pollute the environment and saves the cost of environmental treatment.

• 

• 

Application scope of mobile sandblasting equipment:

Sandblasting machine is a new type of surface treatment processing equipment, which is widely used in machinery, locks, electronic clocks, glasses, hardware tools, molds, glass, ceramics, handicrafts, medical equipment and other industries. It can remove casting blanks, forging, stamping, welding, Heat treatment and machined parts of oxide scale, residue and burrs, glass three-dimensional carving, spraying and other processes. It has the beautiful effect of imitating alloy on the surface of ornaments such as clocks, glasses and so on. The portable sand blasting machine is currently the ideal surface processing and treatment equipment.

The rock splitter machine is suitable for the mining of various hard rocks, and will not produce vibration, noise, dust, etc. during the work process, can achieve silent mining, and will not affect the surrounding environment. The main source of power for the rock splitter machine is the high-pressure oil station. The high-pressure oil station can be said to be the main component of the hydraulic rock splitter. Therefore, the production and manufacture of this part must ensure quality and strive to achieve the effect of zero failure. Basically, the design of the high-pressure oil station embodies the intelligent device, and all imported materials are used. The big feature is that the motor will automatically stop running when the pressure reaches 120mp, which can make the rock splitter not work. In the case of holding pressure.

• 

• 

Hydraulic rock splitter is also called rock splitter machine, concrete splitter machine, etc. It is suitable for large-area rock-breaking. It is a new rock-breaking tool that replaces explosives to achieve mechanized large-scale rock-digging. It consists of a high-pressure pump station and a splitting rod. 120MPA, the combined use of splitting force is 1200=1500 tons, it needs to drill 100MM, the depth is 0.9M, the splitting time is 1 minute, and the splitting depth is 1=3 meters, and 11 small particles are distributed on the splitting machine. A jack can split a large area of ​​rock.

Features of concrete splitter machine:

1. It can basically replace traditional construction, and the construction cost is low.

2. No vibration, no stone splash phenomenon, safety, and environmental protection.

• 

• 

The main application areas of concrete splitter machine:

1. The non-blasting quarrying of stone in medium and large stone yards can be split with split rods to obtain large stones.

2. Open-pit mining of metal mines such as gold, silver, lead, lead, aluminum, and the use of hydraulic rock splitter with down-the-hole drilling can quickly split the ore body, safe, and without vibration.

3. When a huge rock needs to be split when digging a subway tunnel under a city building, and explosives cannot be used, the rock splitter machine can be used to split the rock effectively.

4. The splitting and removal of large rocks in geotechnical engineering can replace the pneumatic pick, the breaking hammer, and the expansion agent to excavate the mountain without blasting.

• 

• 

The concrete splitter machine is a new type of hole-in-column hydraulic splitter. The crushing is hydraulic and static. The rock is drilled first, and then a static load is applied to the hole wall to crack or break the rock. Work engineering: When the concrete splitter machine is working, you can first use a rock drill or a down-the-hole drill to drill a large hole with a hole depth of at least 1-2 meters, and then place the rock splitter machine in the drilled hole and start the hydraulic pump station. Multiple hydraulic splitting heads are extended simultaneously to split the hole. Product composition: A set of hydraulic rock splitters is mainly composed of one or several cracking rods, a hydraulic power station, a set of high and low pressure hydraulic connecting pipes, and quick connectors.

• 

• 

When the hydraulic rock splitter works, it will not produce vibration, impact, noise, dust, flying debris, etc., and the surrounding environment will not be affected. It can work without interference even in densely populated areas or indoors, and besides precision equipment. The rock splitter machine has doubled its yield rate and has the characteristics of safety, environmental protection, economy, and flexibility. It is an ideal product that can be replaced and manually dismantled in the secondary decomposition of small areas of rock.